机动车行驶速度检测系统的设计及其在高速公路交通管理中的应用

在目前先进的视频检测技术、车牌号码识别技术、无线通信网络技术、GPS授时技术、计算机技术等高新技术的基础上，对设计出适用于广东省现行高速公路实际的机动车行驶速度检测系统加以阐述，并对该系统与其他应用系统相结合，投入交通监控的应用情况加以介绍。     

老化因素对沥青性能的影响

通过SHRP试验，分析沥青在老化过程中，各因素(时间、温度、氧、水)对其高、低温性能的影响，从而为沥青的再生提供依据。     

机场跑道填缝胶的研究

通过制备聚硫填缝胶，并对其进行抗拉伸、耐高低温等性能测试，讨论溶剂、环氧树脂、DBP、填料、催化剂等各因素对其性能的影响，总结其最佳实验配方。     

车辆高速行驶安全的思考

分析了轮胎等汽车部件对行车安全的作用，论述了对ABS和车轮定位参数日常检测的必要性．介绍了电涡流中央制动器的制动原理和使用成本。     

城市高架桥之高独柱墩横向位移探讨

结合城市高架高独柱墩顶部发生横向位移这一现象,对高独柱墩顶部横向荷载产生的原因进行初步分析,并应用三维非线性屈曲分析,阐述组合荷载所引起的大变形及混凝土徐变效应与墩顶横向位移之间的关系,提出了设计、施工类似结构时应注意的事项。     

A Simplified Model for the Effect of Weld-Induced Residual Stresses on the Axial Ultimate Strength of Stiffened Plates

The present work investigates the compressive axial ultimate strength of fillet-welded steel-plated ship structures subjected to uniaxial compression, in which the residual stresses in the welded plates are calculated by a thermo-elasto-plastic finite element analysis that is used to fit an idealized model of residual stress distribution. The numerical results of ultimate strength based on the simplified model of residual stress show good agreement with those of various methods including the International Association of Classification Societies (IACS) Common Structural Rules (CSR), leading to the conclusion that the simplified model can be effectively used to represent the distribution of residual stresses in steel-plated structures in a wide range of engineering applications. It is concluded that the widths of the tension zones in the welded plates have a quasi-linear behavior with respect to the plate slenderness. The effect of residual stress on the axial strength of the stiffened plate is analyzed and discussed.     

基于FPGA的单端行波故障测距系统的设计与实现

针对现有的10 k V输电线单端行波故障测距理论,提出了一种基于Cyclone IV系列FPGA芯片EP4CE15F17C8N的软硬件实现方案。采用FPGA自顶向下模块化思想,设计了行波故障测距系统,采用AD7356进行高速数据采集,通过改进的凯伦鲍尔矩阵进行相模变换,用FIR滤波器IP核进行小波变换求模极大值,最后根据模极大值的极性选择测距公式计算故障距离。通过时序仿真和板级测试表明,该方案设计时序稳定,且定位精度高、实时性强。     

船舶柴油机调速器有限转角力矩电机优化控制

本文针对新型的船舶柴油机调速器有限转角力矩电机控制系统优化与稳定性问题,在Matlab/Simulink中基于电枢回路方程与力矩方程搭建有限转角力矩电机动态系统模型.通过数据拟合方法构建电机非线性模型,基于线性控制理论对串级PID控制系统进行稳定性分析,最后使用遗传算法对PID参数进行优化设计.研究成果可为该电机用于柴油机电子调速执行机构提供优化及控制参考.     

基于家庭属性差异的大学生出行方式选择行为研究

为剖析家庭属性差异对大学生出行方式选择行为的影响，基于非集计理论，构建家庭属性差异的大学生出行选择多元Logit 模型. 根据四川省2 571 份大学生出行行为调查问卷，运用SPSS 软件标定模型参数，获取影响大学生出行选择的主要家庭属性因素，并进行敏感性分析. 结果表明：家庭平均年收入、经济净流对大学生出行方式选择有显著的影响；以航空运输为参考，家庭平均年收入、经济净流对公路运输方式选择的影响大于铁路运输；“祖辈替孙辈购买机票”的折扣票务形式可提高大学生选择航空出行的概率.     

Elasto-plastic modeling of soft soil considering degradation of stiffness

The stiffness has a large influence on the behavior of soils. Its value is affected by some of the soils properties, such as the over consolidated ratio(OCR), the effective normal stress, and the plasticity index etc. In this paper, the numerical modeling of soft soils was carried out using an improved elasto-plastic S-clay1 model accounting for degradation of stiffness. The relation between the stiffness and the shear strain was established based on a large number of experimental data. The effects of strain-dependent stiffness of normally consolidated soils and over consolidated soils on the stress-strain behavior were studied through a comparison of the simulations with the experimental results of undrained triaxial compression tests. The results show that the behaviors of soils can be well predicted with the improved constitutive model, particularly before the peak stress.