Ridesharing in North America: Past,Present, and Future

Since the late 1990s, numerous ridematching programmes have integrated the Internet, mobile phones, and social networking into their services. Online ridematching systems are employing a range of new strategies to create “critical mass”: (1) regional and large employer partnerships, (2) financial incentives, (3) social networking to younger populations, and (4) real-time ridematching services that employ “smartphones” and automated ridematching software. Enhanced casual carpooling approaches, which focus on “meeting places”, are also being explored. Today, ridesharing represents approximately 8–11% of the transportation modal share in Canada and the USA, respectively. There are approximately 638 ridematching programmes in North America. Ridesharing's evolution can be categorized into five phases: (1) World War II car-sharing (or carpooling) clubs; (2) major responses to the 1970s energy crises; (3) early organized ridesharing schemes; (4) reliable ridesharing systems; and (5) technology-enabled ridematching. While ridesharing's future growth and direction are uncertain, the next decade is likely to include greater interoperability among services, technology integration, and stronger policy support. In light of growing concerns about climate change, congestion, and oil dependency, more research is needed to better understand ridesharing's impacts on infrastructure, congestion, and energy/emissions.     

Demonstration of vehicular visible light communication based on LED headlamp

With the emergence of LED lighting, IT convergence technology using the visible spectrum of LEDs, such as Visible Light Communication (VLC), has been highlighted. Among the many VLC applications, vehicular VLCs based on LED headlamps and transportation lighting infrastructure, such as street lamps, traffic lights, etc., are considered good alternatives for Intelligent Transportation Systems (ITS) or Active Safety applications. This paper introduces a demonstration system of vehicle-to-vehicle (V2V) VLC based on LED headlamps. By applying an inverse 4-PPM modulation scheme satisfying a 75 % dimming level under the light distribution regulation of LED headlamp, the proposed system showed its capability for V2V VLC with a 10 kbps data rate for more than 30 m under day time conditions. By measuring the BER performance according to distance, outdoor V2V VLC was possible for more than 30 m even in the day time.     

The evolution of U.S. rail freight pricing in the post-deregulation era: revenues versus marginal costs for five commodity types

There have now been over three decades of experience with rate-making freedom for all modes of intercity freight transport in the United States. Most evidence suggests that regulatory change has been beneficial for the rail industry and its users. Despite evidence of positive impacts of regulatory reform of U.S. freight transport, there is limited evidence related to long-term pricing trends by commodity in the deregulated era. Moreover, U.S. shipper groups have called for increased regulation of U.S. railroads, citing increased rates and profits, and monopoly pricing to “captive shippers.” This study estimates U.S. railroad revenue-marginal cost ratios for seven different commodities between 1986 and 2008. Interestingly, we find no significant increase in revenue-cost margins for commodities thought to be “most captive” (coal and chemicals), while finding large increases for some commodities thought to be “non-captive.” These results may provide insight into the impacts of regulatory reform in other countries, where there are similar concerns of equitable pricing and financial viability. They suggest that a move toward a more market-based pricing system can enhance railroad viability without harming those with fewer transport options.     

Combined power management/design optimization for a fuel cell/battery plug-in hybrid electric vehicle using multi-objective particle swarm optimization

In this paper, the combined power management/design optimization problem is investigated for a fuel cell/Liion battery PHEV. Formulated as a constrained multi-objective optimization problem (MOP), the combined optimization problem simultaneously minimizes the vehicle cost and fuel consumption subject to the vehicle performance requirements. With an emphasis on developing a generic optimization algorithm to find the Pareto front for the synthesized MOP, the Pareto based multi-objective particle swarm optimization (PMOPSO) algorithm is developed, which solely depends on the concept of Pareto dominance. Three approaches are introduced to the PMOPSO method to address the constrained MOP. They are: (i) by incorporating system constraints in the original objective functions, the constrained MOP is transformed to an unconstrained MOP; (ii) to avoid being trapped in local minima, a disturbance operator with a decaying mutation possibility is introduced; (iii) to generate a sparsely distributed Pareto front, the concept of crowding distance is utilized to determine the global guidance for the particles. Finally, under the Matlab/Simulink software environment, simulation results are presented to demonstrate the effectiveness of the PMOPSO in the derivation of the true Pareto front.     

Optimization of drying performance considering driving conditions

Compressed air can be used as an energy source for brake systems in medium-heavy and heavy-duty commercial vehicles. The moisture in compressed air, which is due to high temperature and humidity, can be eliminated by using an air dryer. In this paper, drying performance data for a cartridge were obtained and used to develop a drying performance program, to predict the moisture and relative humidity in the air tanks of vehicles. The on-load time, off-load time, air flow, duty cycle, humidity and dew point temperature were calculated according to air consumption. The validity of the program was verified, and it was shown to be able to predict humidity changes in the air tank. The air tank capacity was increased from 100 to 130 to reduce the duty cycle. Therefore, the regeneration rate decreased from 18% to 15%, but the dew point depression temperature (ΔT) remained above 30°C. The duty cycle decreased from 50% to 43%, and the total operation time and power consumption of the air compressor were reduced. In conclusion, fuel savings were obtained by changing the parameters to optimize the system.     

Public responses to policies designed to internalise environmental and social externalities from road transport in New Zealand

Based on a public survey of registered voters, we explore four options for internalising the social and environmental costs of road transport. The options were presented together with generalised factual information about their benefits and costs. Respondents are highly supportive of fuel use efficiency standards and exhaust gas quality standards, with lesser support for proposed initiatives of road user charges and speed reduction. Demographic analysis of responses enables identification of those who might favour or oppose particular options. In this case women are identified as being strongly supportive of the speed reduction option.     

Prediction of the cooling factors of a vehicle brake disc and its influence on the results of a thermal numerical simulation

In the process of developing the brake disc, it is necessary that we predict the suitability of the design. In this manner, we can affirm that even the first prototype will satisfy all of the customer homologation requests. Usually those comprise different sequential braking tests in which the maximal achieved temperature is the criterion that governs brake disc suitability. The knowledge of how to predict the behavior of a brake disc in the early pretesting phase has a significant impact on development costs and time. The common method that is used for predicting the temperatures in the brake disc during braking is numerical simulation analysis. With the help of Computational Fluid Dynamics, the flow through a vehicle ventilated brake disc of known geometry was determined, and the wall heat transfer coefficients for all vehicle speeds and brake disc temperatures were calculated. The results were then imported into a thermal numerical simulation of a sequential-braking vehicle test. The results showed that the consideration of cooling factors has a significant impact on temperature courses. To obtain accurate results from the numerical simulation and to simulate the vehicle test precisely, the proper wall heat transfer coefficients must be considered. The proposed method produces more accurate numerical results and enables the development engineer to develop suitable brake disc geometry in the early pretesting phase.     

Evaluation of emergency braking deceleration for accident reconstruction

Tire-road coefficient of friction is often used to estimate stopping distances and other aspects of accident reconstruction. The actual value that must be used in the calculations is often obtained from published data and sometimes measured on-site. While it depends mainly on tires, road surface, ambient conditions and speed, the effective stopping capability of a vehicle is influenced also by other parameters (car, driver, ABS, etc.). This paper presents a methodology that, exploiting data obtained with on-site measurements and/or published by technical press, allows the evaluation of the coefficient of friction and the stopping capability of a car. This is done by means of a computer program, based on a fuzzy logic approach.     

Development of a path planning system using mean shift algorithm for driver assistance

The longitudinal and lateral vehicle control techniques have been widely used in several active driver assistance systems. The adaptive cruise control, lane keeping assistant control, vehicle platooning and stop-and-go control are typical examples of the most important applications. In this study, a novel path planning method is proposed considering the driving environment such as road shape, ego vehicle and surrounding vehicles’ movement. The relative distance and velocity between the ego vehicle and surrounding vehicles are identified with respect to the predicted lane shape in front of the ego vehicle. Based on the identified information, the road shape and surrounding vehicles are mapped into the intensity image and the desired vector for the ego vehicle’s movement is determined by the maximum intensity density tracing method. The desired vehicle path is followed by the acceleration/deceleration control and the steering assist control, respectively. In order to evaluate the performance of the proposed system, simulations are conducted and compared with ACC systems.     

Automotive windshield — pedestrian head impact: Energy absorption capability of interlayer material

During accident, the interlayer of windshield plays an important role in the crash safety of automotive and protection of pedestrian or passenger. The understanding of its energy absorption capability is of fundamental importance. Conventional interlayer material of automotive windshield is made by Polyvinyl butyral (PVB). Recently, a new candidate of high-performance nanoporous energy absorption system (NEAS) has been suggested as a candidate for crashworthiness. For the model problem of pedestrian head impact with windshield, we compare the energy absorption capabilities of PVB and NEAS interlayers, in terms of the contact force, acceleration, velocity, head injury criteria, and energy absorption ratio, among which results obtained from PVB interlayers are validated by literature references. The impact speed is obtained from virtual test field in PC-CRASH, and the impact simulations are carried out using explicit finite element simulations. Both the accident speed and interlayer thickness are varied to explore their effects. The explicit relationships established among the energy absorption capabilities, impact speed, and interlayer material/thickness, are useful for safety evaluation as well as automotive design. It is shown that the NEAS interlayer may absorb more energy than PVB interlayer and it may be a competitive candidate for windshield interlayer.