Optimal Performance of Variable Component Suspensions

Most vehicle suspension systems use fixed passive components that offer a compromise in performance between sprung mass isolation, suspension travel, and tireroad contact force. Recently, systems with discretely adjustable dampers and air springs been added to production vehicles. Active and semi-active damping concepts for vehicle suspensions have also been studied theoretically and with physical prototypes. This paper examines the optimal performance comparisons of variable component suspensions, including active damping and full-state feedback, for “quartercar” heave models. Two and three dimensional optimizations are computed using performance indicators to find the component parameters (control gains) that provide “optimal” performance for statistically described roadway inputs. The effects of performance weighting and feedback configuration are examined. Active damping is shown to be mainly important for vehicle isolation. A passive vehicle suspension can control suspension travel and tire contact force nearly as well as a full state feedback control strategy.     

「台湾桃园国际机场联外捷运系统建设计划」地下工程的设计与施工

介绍「台湾桃园国际机场联外捷运系统建设计划」中机场区段地下工程的设计成果,并探讨施工时将面临的主要工程问题如,潜盾隧道穿越营运中的机场滑行道下方需考虑对其进行保护、隧道遭遇既有地锚的处理方式,及明挖覆盖隧道或车站于卵砾石层进行开挖,临时挡土措施及潜盾隧道的掘进作业,需考虑卵砾石大粒径与高硬度的特性等等设计考虑.现有数据显示,透过适当的机具改良、辅助工法的应用及良好的施工管理,即使是在高地下水压的卵砾石层,施作地下连续壁及以潜盾机施作隧道并无太大困难,且施工引致的地表沉陷及施工精度亦可获得良好的控制.     

Evaluation of emergency braking deceleration for accident reconstruction

Tire-road coefficient of friction is often used to estimate stopping distances and other aspects of accident reconstruction. The actual value that must be used in the calculations is often obtained from published data and sometimes measured on-site. While it depends mainly on tires, road surface, ambient conditions and speed, the effective stopping capability of a vehicle is influenced also by other parameters (car, driver, ABS, etc.). This paper presents a methodology that, exploiting data obtained with on-site measurements and/or published by technical press, allows the evaluation of the coefficient of friction and the stopping capability of a car. This is done by means of a computer program, based on a fuzzy logic approach.     

An Experimental Investigation of Preview Control

There is mounting theoretical evidence to suggest that preview control can be of substantial benefit to a semi-active suspension for random road inputs. In this paper, the benefits of wheel-base preview control are measured experimentally, using a prototype semi-active damper in a half-car 'Hardware-in-the-loop' (HiL) rig with a planar two-axle heavy vehicle model. The benefits of preview control using the prototype semi-active damper are found to be less than theoretically possible, due to the phase lag between the demanded and achieved damping force. It is shown that the performance of the prototype damper can be improved significantly by having a theoretical simulation running ahead of the HiL vehicle. The theoretical simulation is used to predict the demanded damper force for the HiL vehicle, and thereby compensate for the phase lag in the prototype damper.     

Transportation and land-use preferences and residents’ neighborhood choices: the sufficiency of compact development in the Atlanta region

This paper analyzes the transportation and land-use preference and actual neighborhood choices of a sample of 1,455 residents of metro Atlanta. We develop a stated-preference scale on which desires for neighborhood type are gauged, from preferences for low-density, auto-oriented environments to desires for compact, walkable, and transit-oriented neighborhoods. This scale is then related to desires for change in one’s own neighborhood characteristics after a hypothetical move. If all neighborhood preferences were equally likely to be satisfied, then neighborhood preferences would not be correlated with a desire for change. By contrast, in the current study, stronger preferences for a more walkable environment are associated with greater desire for change in one’s neighborhood characteristics. This suggests an undersupply of compact, walkable, and transit-friendly neighborhood types relative to current demand.

Dynamics of railway freight vehicles

This paper summarises the historical development of railway freight vehicles and how vehicle designers have tackled the difficult challenges of producing running gear which can accommodate the very high tare to laden mass of typical freight wagons whilst maintaining stable running at the maximum required speed and good curving performance. The most common current freight bogies are described in detail and recent improvements in techniques used to simulate the dynamic behaviour of railway vehicles are summarised and examples of how these have been used to improve freight vehicle dynamic behaviour are included. A number of recent developments and innovative components and sub systems are outlined and finally two new developments are presented in more detail: the LEILA bogie and the SUSTRAIL bogie.     

Pressure drop and heat transfer of catalyzed diesel particulate filters due to changes in soot loading and flow rate

When soot particles are loaded in a diesel particulate filter, it causes increase in back pressure of the exhaust system. To minimize this pressure drop due to DPF, the filter needs to be regenerated after a certain amount of soot has been accumulated. It is crucial to estimate the correct amount of soot that has been accumulated by measuring the differential pressure. It is also important to understand changes in pressure drop due to flow rate variations of the exhaust gas, since the pressure drop would be influenced by the exhaust flow rate as well as the amount of soot. Furthermore, the heat transfer characteristics of the catalyzed diesel particulate filter (CDPF) are another major issue, as the filter is occasionally exposed to high temperature gas. This study presents the characteristics of pressure drop according to the variation of soot loading and the mass flow rate in CDPF. In addition, heat transfer characteristics in the filter was investigated when a high temperature gas flows into the CDPF. Tests were performed in several CDPF samples having varying amounts of catalyst coating. Experimental results indicate that rig-based experiments are useful in understanding the characteristics of pressure drop in the CDPF. In the cake filtration region, a pressure drop has a proportional relationship according to soot loading and mass flow rate. It was found that an increased catalyst coating may lead to enhanced convective heat transfer.     

Numerical modeling of hollow-cone fuel atomization,vaporization and wall impingement processes under high ambient temperatures

In the following paper, a numerical study of the atomization, vaporization and wall impingement processes of hollow-cone fuel spray from high-pressure swirl injectors under various ambient temperature conditions was carried out. Also, the availability of applied models and the effect of ambient temperature on spray characteristics is discussed. The Linearized Instability Sheet Atomization (LISA) model combined with the Aerodynamically Progressed Taylor Analogy Breakup (APTAB) model, the improved Abramzon model and the Gosman model are used to calculate the atomization, vaporization and wall impingement processes of hollow-cone fuel spray, respectively. Spray models are implemented with the modified KIVA code. The calculation results of the spray characteristics under two ambient temperatures, including spray tip penetration, spray structure and radial distance after spray-wall impingement are compared to the experimental results obtained by the Laser Induced Exciplex Fluorescence (LIEF) technique. The droplet size distribution, ambient gas velocity field, vapor phase distribution and fuel film mass generated by spray-wall impingement, measurements which are generally difficult to obtain by experimental methods, are also calculated and discussed. Quantitative discussions on the effect of the ambient temperature on the spray development process are conducted. It is shown that the applied models are applicable even in the high ambient temperature condition.     

Development of fuel cell hybrid powertrain research platform based on dynamic testbed

An experimental research platform based on a dynamic testbed is developed and applied for fuel cell hybrid powertrain integration and control. A driver brake model is added to the dynamic testbed to simulate the braking process of an electric vehicle. Sub-systems of the fuel cell hybrid powertrain are tested, and characteristic parameters are obtained. A simulation platform is constructed in LabVIEW environment, and its validity is verified by dynamic test results. A real time control system is developed with an embedded PC for the function of rapid control prototyping. Using this platform, fuel cell battery hybrid and fuel cell supercapacitor hybrid configurations are investigated. This platform provides a powerful tool for fuel cell powertrain research and development.     

Modeling the flow regime near the source in underwater gas releases

Recent progress in calculating gas bubble sizes in a plume, based on phenomenological approaches using the release conditions is a significant improvement to make the gas plume models self-reliant. Such calculations require details of conditions Near the Source of Plume (NSP); (i.e. the plume/jet velocity and radius near the source), which inspired the present work. Determining NSP conditions for gas plumes are far more complex than that for oil plumes due to the substantial density difference between gas and water. To calculate NSP conditions, modeling the early stage of the plume is important. A novel method of modeling the early stage of an underwater gas release is presented here. Major impact of the present work is to define the correct NSP conditions for underwater gas releases, which is not possible with available methods as those techniques are not based on the physics of flow region near the source of the plume/jet. We introduce super Gaussian profiles to model the density and velocity variations of the early stages of plume, coupled with the laws of fluid mechanics to define profile parameters. This new approach, models the velocity profile variation from near uniform, across the section at the release point to Gaussian some distance away. The comparisons show that experimental data agrees well with the computations.