Energy facility siting in the urban coastal zone: Compatible or not?

Abstract

Most federal and state coastal laws were framed with a distinct emphasis on preservation of rural/recreational areas. Yet in recent years a rural/urban coastal dichotomy has emerged. This has been especially prominent in the siting of energy facilities since these operations are often water dependent; power plants, for example, need huge amounts of cooling water, and offshore oil and gas extraction requires onshore support facilities. Recently, this issue has gained special prominence on the East Coast with the commencement of offshore oil and gas exploration. A case study was conducted in Hudson County, New Jersey, in New York harbor. In this area five oil‐related facility proposals were rejected from 1972 to 1976, primarily due to citizen opposition. Citizen activists now see the urban waterfront as a special place to which they want access and amenity uses rather than a continuation of past, almost exclusive industrial development. Hudson County citizens share the aspirations of those in several urban coastal areas which have experienced waterfront revitalization, including Baltimore, Boston, Chicago, Detroit, New Haven, Philadelphia, San Francisco, Seattle, and Toronto. Innovative siting which utilizes inland, rather than coastal, locations is suggested as one way to lessen urban/rural siting tensions.     

Egg production and associated losses of carbon, nitrogen and fatty acids from maternal biomass in Calanus finmarchicus before the spring bloom

We present concurrent data on ingestion, egg production and the loss of maternal biomass in pre-spring bloom female Calanus finmarchicus incubated under conditions representative of those in situ in the North Atlantic. A balanced metabolic budget was constructed and used to examine the relative importance of ingestion and biomass for fuelling egg production during the incubations. Ingested carbon was not sufficient to meet the observed demands for egg production. More than 80% of the carbon utilised by the females was instead derived from their biomass. Fatty acid analysis demonstrated that the storage reserves, 20:1 (n−9) and 22:1 (n−11), were virtually absent before experimentation began, and therefore could not have been used to supply the carbon required for egg production during the incubations. The C:N mass-specific ratio of the biomass utilised was 4.1, suggesting that the females had instead catabolised protein in order to meet their metabolic demands. These results suggest that C. finmarchicus adopts a sacrificial reproductive strategy when food availability is low.     

Sea Cucumber Moratorium and Livelihood Diversity in Papua New Guinea

Livelihood diversity factors such as flexibility within fisheries, geographical mobility, reallocation of fishing effort into the broader economy, and the non-material benefits that fisheries provide are important areas of research in marine policy. We use two small-scale fisheries related socio-economic surveys of communities in the Tigak Islands of Papua New Guinea. The first conducted 5 years before a ban on the harvesting of sea cucumbers was imposed and the second from the present day, 5 years after the initiation of the ban—with the objectives of exploring changes in household fishing strategies (types and numbers of species targeted) and to identify any important socioeconomic factors that help explain those changes. Fishing's contribution to total household income has increased significantly (p = 0.019) up from 61% in 2004 to 73% in 2014 with the percentage of female residents living in a household now positively and significantly (p = 0.018) associated with fishing income. The average number of species categories targeted per household increased insignificantly while households with more women are significantly (p = 0.018) less likely to target more species than households with more men. Moreover, customary management practices contribute to this difference. Together, these results show that households are not worse off financially 5 years after the ban on sea cucumber harvesting and that gendered seascape use has implications for the role of livelihood diversity as a marine policy tool.     

美国拉臂钩技术发展及应用现状

我叫大卫·泽洛斯特里克,是斯泰勒工业有限公司的董事长.斯泰勒工业有限公司是美国第一家拉臂钩制造商,成立于1990年,座落于美国爱荷华州的加纳区.     

列车联运网络建设的重要性

概述了欧洲几个国家列车联运网络的建设情况,指出在提高列车运行速度的同时,应提供优质的联运服务。     

Meeting an 80% reduction in greenhouse gas emissions from transportation by 2050: A case study in California

This paper investigates how California may reduce transportation greenhouse gas emissions 80% below 1990 levels by 2050 (i.e., 80in50). A Kaya framework that decomposes greenhouse gas emissions into the product of population, transport intensity, energy intensity, and carbon intensity is used to analyze emissions and mitigation options. Each transportation subsector, including light-duty, heavy-duty, aviation, rail, marine, agriculture, and off-road vehicles, is analyzed to identify specific mitigation options and understand its potential for reducing greenhouse gas emissions. Scenario analysis shows that, while California’s 2050 target is ambitious, it can be achieved in transport if a concerted effort is made to change travel behavior and the vehicles and fuels that provide mobility. While no individual ‘‘Silver Bullet” strategy exists that can achieve the goals, a portfolio approach that combines strategies could yield success. The 80in50 scenarios show the impacts of advanced vehicle and fuels technologies as well as the role of travel demand reduction, which can significantly reduce energy and resource requirements and the level of technology development needed to meet the target.     

Modeling the structural relationships among short-distance travel amounts,perceptions, affections,and desires

Using structural equation modeling, the relationships among travel amounts, perceptions, affections, and desires across five short-distance (one-way trips of less than 100 miles) travel categories (overall, commute, work/school-related, entertainment/social/recreation, and personal vehicle) are examined. The models are estimated using data collected in 1998 from more than 1300 working commuters in the San Francisco Bay Area. A cross-model analysis reveals three robust relationships, namely: (1) myriad measures of travel amounts work together to affect perceptions; (2) perceptions are consistently important in shaping desires; and (3) affections have a positive relationship with desires. The second finding suggests that two individuals who travel the same objective amount may not have the same desire to reduce their travel: how much individuals perceive their travel to be is important. The third point argues that the degree to which travel is enjoyed is a key determinant of shaping desires to reduce travel: the more travel is enjoyed, the less the desire to reduce it.     

Fundamental Issues in Suspension Design for Heavy Road Vehicles

Heavy road vehicles play an important role in the economy of many countries by providing an efficient means of transporting freight. Such vehicles can also have a significant impact on safety, the infrastructure and the environment. The design of the suspension affects the performance of the vehicle in terms of ride, infrastructure damage, suspension working space, energy consumption, rollover stability, yaw stability, braking and traction. The published literature on suspension design for heavy road vehicles is reviewed. It is found that extensive knowledge exists, but that there are areas where improved understanding is needed. Areas identified as fundamental issues requiring attention include ride discomfort criteria, secondary suspensions, and controllable suspensions. Two issues in particular are examined in detail: suspension tuning and suspension configuration. In the tuning of suspension parameter values for vibration performance, numerical optimisation techniques have been used extensively, but generic tuning strategies have not been widely developed. Modal analysis is proposed as a technique for gaining the insight into vehicle vibration behaviour necessary to enable tuning strategies to be devised. As an example, the technique is applied to the pitch-plane vibration of a tractor-semitrailer. In analyses of new suspension configurations or concepts, comparison with alternative concepts is not always made. Lack of such comparisons makes the selection of an optimum concept difficult. Analysis of alternative concepts using simple mathematical models, and comparison of their performance using common criteria, is advocated for enabling informed selection of an optimum. An example involving two alternative roll control systems is used to demonstrate the issue.     

Time-series model for vehicle speeds

This paper presents a time-series model for the spot speeds of vehicles on a road section. Based on time-series analysis techniques, the model incorporates information on the extent of existing dependency between the speeds of successive vehicles. The model for the data is chosen while relying heavily on the data, and thus emphasis is given to their special characteristics. The advantages of using the model are examined with regard to the relative speed of two successive vehicles along a road section. The results are compared with those obtained by using a model of independent observations; fewer errors are obtained with the time-series model. Therefore, it is concluded that the sequence of speed observations contains valuable information which should be incorporated into speed models.