SMW搅拌桩围护基坑的时空效应分析

在软土基坑开挖施工中，运用时空效应规律，充分调动未开挖部分土体的承载能力，能够有效控制土体位移，保护周边环境，达到安全经济施工的目的。文章以天津地铁1号线营口道车站基坑施工为例，分析在采用SMW水泥土搅拌桩作为围护结构的基坑开挖施工中，如何选择合理的架设支撑时机以及开挖分块，以充分利用时空效应规律，控制基坑内外的变形，取得最大的经济效益。     

建筑物受深基坑开挖影响的显式差分分析

在基坑开挖过程中，临近重要建筑物的保护是一个重要的研究课题，通过天津地铁营口道车站深基坑开挖的模拟分析可以看出，地表沉降、墙体变位、基坑隆起三者之间存在着明显的关系，临近基坑建筑物沉降变形与其基坑的接近度有明显关系，施工过程中应综合考虑技术可行性、安全、环保、质量、工期、效益等因素采取保护措施。     

Target priority determination methods by interval-valued intuitionistic fuzzy sets with unknown attribute weights

The paper aims at the problem of multi-targets threat degree being hard to be evaluated accurately in complex air defense battlefield environments. Combined with multi-sensors information fusion and interval-valued intuitionistic fuzzy sets (IVIFS) theories, the target priority determination is studied. The score and accuracy functions of IVIFS are improved with thinking about the hesitating information in order to increase the rationality. Then, the influence factors of target priority and the nonlinear relationship between the influence factors and target priority are analyzed. Next, the algorithms for calculating the factor weights and sensor weights are given. Based on the theory of IVIFS and technique for order preference by similarity to an ideal solution (TOPSIS), two methods of target priority determination based on the IVIFS and TOPSIS are proposed. At last, an application example verifies the effectiveness and flexibility of the proposed algorithms.     

Elasto-plastic modeling of soft soil considering degradation of stiffness

The stiffness has a large influence on the behavior of soils. Its value is affected by some of the soils properties, such as the over consolidated ratio(OCR), the effective normal stress, and the plasticity index etc. In this paper, the numerical modeling of soft soils was carried out using an improved elasto-plastic S-clay1 model accounting for degradation of stiffness. The relation between the stiffness and the shear strain was established based on a large number of experimental data. The effects of strain-dependent stiffness of normally consolidated soils and over consolidated soils on the stress-strain behavior were studied through a comparison of the simulations with the experimental results of undrained triaxial compression tests. The results show that the behaviors of soils can be well predicted with the improved constitutive model, particularly before the peak stress.     

Decomposing and Cluster Refinement Design Method for Application-Specific Network-on-Chips

Along with higher and higher integration of intellectual properties (IPs) on a single chip, traditional bus-based system-on-chips (SoC) meets several design difficulties (such as low scalability, high power consumption, packet latency and clock tree problem). As a promising solution, network-on-chips (NoC) has been proposed and widely studied. In this work, a novel algorithm for NoC topology synthesis, which is decomposing and cluster refinement (DCR) algorithm, has been proposed to minimize the total power consumption of application-specific NoC. This algorithm is composed of two stages: decomposing with cluster generation, and cluster refinement. For partitioning and cluster generation, an initial low-power solution for NoC topology is generated. For cluster refinement, the clustering is optimized by performing floorplan to further reduce power consumption. Meanwhile, a good tradeoff between power consumption and CPU time can be achieved. Experimental results show that the proposed method outperforms the existing work.     

诺伊达地铁车辆制动系统模块化工艺设计

介绍了印度诺伊达地铁车辆制动系统结构,采用模块化工艺设计方法对制动零部件进行设计,分别设计出风源模块、制动控制模块、辅助控制模块及管路模块,从而优化产品结构,简化组装,提高了工作效率,并且方便后续维护,提高产品竞争力。     

都市圈视角下佛山市顺德区轨道交通线网规划思考

为深入研究都市圈背景下市辖区轨道交通线网规划方法,在总结国内外同类城市轨道交通发展经验的基础上,以佛山市顺德区为例,提出了1套适用于都市圈市辖区的轨道交通线网规划方法.     

基于Ansys的矩形加筋平盖封头强度评定

将有限元方法与分析设计相结合,利用有限元分析软件Ansys对一种矩形加筋平盖封头进行强度评定。本文首先介绍瓶盖封头结构的改进。然后建立有限元模型,并进行应力求解。结果表明,此加筋平盖封头满足强度要求,与普通平盖封头相比,减小了平盖的厚度,降低了结构总重量,对平盖封头的结构改进设计具有一定指导作用。     

传感器智能芯片与阵列光纤对接平台运动顺序优化

从运动平台空间运动可能存在的720种运动顺序配置入手, 针对智能芯片与阵列光纤对接过程各运动单元产生的几何误差进行敏感性分析, 通过区分和归类各运动单元的敏感误差和不敏感误差, 将运动平台运动顺序配置数减少到90;考虑到运动平台各运动单元具有均匀分散、齐整可比的特性, 运用正交试验设计方法将敏感误差和不敏感误差确定为3个水平, 将6个运动单元确定为6个影响因素, 建立了对应的正交试验表, 得出了5条运动顺序配置的试验路径; 借助MATLAB仿真平台对5条运动顺序配置的试验路径进行了仿真试验, 获得了运动平台运动顺序最优配置; 在封装系统多自由度精密运动平台上进行了实测试验, 检验了仿真试验结果。试验结果表明: 传感器智能芯片与阵列光纤对接的运动平台在空间直角坐标系中最优的运动顺序为先沿横轴平动, 再绕横轴转动, 再绕纵轴转动, 最后沿纵轴平动; 该方法可优化光纤扫描雷达传感器智能芯片与阵列光纤对接的运动平台的空间运动顺序, 还可预测和规划其他多自由度运动平台的配准路径。