Traffic Noise in Europe: A Comparison of Calculation Methods,Noise Indices and Noise Standards for Road and Railroad Traffic in Europe

The demand for inland freight transport in Europe is mainly met by road transport, leading to unsustainable impacts such as air pollution, greenhouse gas emissions and congestion. Since rail transport has lower externalities than road transport, a modal shift from road to rail is an accepted policy goal for achieving a more sustainable and competitive transport system. However, intermodal road–rail transport is mainly competitive for long-distance transport, and as a consequence, the potential for modal shift is limited. The cost efficiency of road–rail intermodal transport is particularly sensitive to pre- and post-haulage (PPH) costs, since this activity typically has a larger cost compared with its share of the total distance in the transport chain. For intermodal transportation over shorter distances, for example, below 300 km and where there are substantial PPH activities at both ends of the chain, the competitiveness of the intermodal transport system compared with that of direct road is low. Improving the efficiency of PPH activities is, therefore, of utmost importance for the competitiveness of the intermodal transport system. This paper looks into the issue of improving the cost efficiency of an intermodal transport chain by implementing an innovative and flexible legal framework regarding the PPH activities in the chain. By extending the legal framework with exemptions for longer vehicles in PPH, the cost efficiency could be greatly improved. The purpose of such a framework is to allow and enable, for PPH exclusively, the use of 2?×?40 foot or even two semi-trailers using only one vehicle in the context of the Swedish regulatory framework. This paper develops a strategic calculation model for assessing and investigating the consequences of such a framework and investigates the framework's potential in terms of cost efficiency. The model in combination with a sensitivity analysis of input variables gives a comprehensive understanding of the effects of PPH under different circumstances. From the results, it is evident that there are substantial positive effects associated with a PPH framework of longer vehicles. Results indicate that a typical shipper may experience cost reductions of about 5–10% of the total costs of the intermodal transport chain. In summary, a more innovative and flexible legal framework regarding vehicle length in the PPH links can contribute to a greater modal shift, improved cost efficiency and more environmentally friendly transportation systems.     

Short Sea Shipping in Supply Chains. A Strategic Assessment

The feasibility of implementing short sea shipping (SSS) between two specific ports has been typically approached on the operative level, in terms of time and cost for a specific origin–destination pair. This paper focuses on the strategic level. Particularly, its goal is to study the potential of SSS in different industrial sectors by analysing their freight-distribution strategies. To achieve the objective, some standard freight-distribution strategies are defined based on the requirements of the industry, the demand and the product being transported. The information is complemented with a survey of more than 100 Spanish companies distributing internationally. As a result it is concluded that there are economies of scale related to the size of the carrier (the ship) and its capacity to absorb the variability in demand. This potential increases with the cargo value. Additionally, a framework of supply/distribution chains is provided which can help to identify potential customers/sectors and the feasibility of new potential shipping lines. The value of this paper resides in its approach (strategic, instead of operational/tactical), and the solid groundwork point provided for future researchers.     

A decision support system for total airport operations management and planning

The airport planning and decision making process exhibits various trade‐offs and complications due to the large number of stakeholders having different, and sometimes conflicting, objectives regarding the assessment of airport performance. As a result, the airport performance assessment necessitates the use of advanced modelling capabilities and decision support systems or tools in order to capture the multifaceted aspects, interests and measures of airport performance like capacity, delays, safety, security, noise and cost‐effectiveness. Presently, airport decision makers lack decision support tools able to provide an integrated view of total airport (both airside and landside) operations and analyse at a reasonable effort and decision‐oriented manner the various trade‐offs involved among different airport performance measures. The objective of this paper is twofold: (i) to describe the decision‐oriented modelling framework and development process of a decision support system for total airport operations management and planning, and (ii) to demonstrate the decision support capabilities and basic modelling functionalities of the proposed system. Copyright © 2010 John Wiley & Sons, Ltd.     

A fuel tankering model applied to a domestic airline network

This paper presents a linear programming model designed to determine the optimum fuel loading quantities along a route network for a Brazilian domestic airline. Assuming that there are no volume purchase or storage capacity restrictions on each station, the analysis is carried out for one aircraft on one day of its schedule. Results are extrapolated for a monthly and yearly basis. Through the proposed model, it is seen that such a fuel tankering technique leads to a 5% economical saving, but produces a 1% additional fuel burn. A discussion on the environmental impact for this procedure is also proposed. Copyright © 2011 John Wiley & Sons, Ltd.     

Evaluating erosion susceptibility for land‐use planning in coastal watersheds

Abstract

This paper reports on research conducted in support of a coastal zone management effort to reduce erosion and sedimentation impacts in a wetland watershed, Elkhorn Slough, Monterey County, California. The research reviews methods of determining soil erosion susceptibility and relating it to land‐use intensity within the watershed, measured by a land disturbance index. Erosion susceptibility is measured in three ways: by a combination of slope and the erosion factor of the Universal Soil Loss Equation; by field measurement of erosion and deposition on selected sites; and by computer‐assisted terrain analysis of data from secondary sources. Land use is shown to be a more important factor than landform in influencing relative erosion susceptibility.     

Simulation of multiregional wave-structure impact on damping elements on offshore structures

Hydrodynamic impacts of free surface waves are a widely known issue in coastal and ship engineering. They can result in severe damage to important industry facilities (e.g. offshore wind turbines) or means of transport (e.g. oil tankers). This kinds of damage give rise to different difficulties due to economic losses and environmental pollution. On that account, the present paper deals with a special feature of a protective mechanism for offshore structures. We develop a numerical multiregional wave-structure impact model of a damping element prototype. The investigated prototype consists essentially of an elastic cover that is attached to the cylindrical mono-pile foundation at wave level. The chamber between the flexible structure and the mono-pile is filled with a liquid. A prototype of the damping element has been constructed as a mono-pile structure test object. In order to measure the hydrodynamic loads on the test object, we placed piezoelectric sensors on the stagnation points of the mono-pile. The multiregional simulation model created is able to imitate the wave impact and its consequences. These implications include the deformation and oscillation of the elastic shell, the resultant force affecting the pile and the dissipation power of the damping fluid. The dissipation power can be understood as the crucial factor preventing the shell from oscillating over long periods of time. It enables us to state the mechanical energy that is transfered due to the wave’s impact on the damping fluid region.     

Modeling transit vehicle repair duration and active service time

Abstract

The need for dependable and flexible models of transit vehicle maintenance has been well established in the literature as a means for improving daily operations, capital planning and service quality. Stemming from the practical need to predict the duration of maintenance activities and active service time for buses, this paper uses the principles of duration modeling to address two important questions: what is the duration of vehicle maintenance activities and, given that a bus is in active service, how long will it take? We extend previous work by including exogenous factors directly affecting maintenance duration and active service time in fully parametric duration models and examine such activities for the transit system in Athens (Greece). Results indicate that vehicle age, kilometers travelled and repair type are amongst the most important determinants of maintenance duration.     

Random regret minimization or random utility maximization: an exploratory analysis in the context of automobile fuel choice

Interest in alternative behavioural paradigms to random utility maximization (RUM) has existed ever since the dominance of the RUM formulation. One alternative is known as random regret minimization (RRM), which suggests that when choosing between alternatives, decision makers aim to minimize anticipated regret. Although the idea of regret is not new, its incorporation into the same discrete choice framework of RUM is very recent. This paper is the first to apply the RRM‐model framework to model choice amongst durable goods. Specifically, we estimate and compare the RRM and RUM models in a stated choice context of choosing amongst vehicles fuelled with petrol, diesel and hybrid (associated with specific levels of fuel efficiency and engine capacity). The RRM model is found to achieve a marginally better fit (using a non‐nested test of differences) than its equally parsimonious RUM counterpart. As a second contribution, we derive a formulation for regret‐based elasticities and compare utility‐based and regret‐based elasticities in the context of stated vehicle type choices. We find that in the context of our choice data, mean estimates of elasticities are different for many of the attributes and alternatives. Copyright © 2011 John Wiley & Sons, Ltd.     

A dynamic route choice model for public transport networks with boarding queues

Abstract

The concepts of optimal strategy and hyperpath were born within the framework of static frequency-based public transport assignment, where it is assumed that travel times and frequencies do not change over time and no overcrowding occurs. However, the formation of queues at public transport stops can prevent passengers from boarding the first vehicle approaching and can thus lead to additional delays in their trip. Assuming that passengers know from previous experience that for certain stops/lines they will have to wait for the arrival of the 2nd, 3rd, …, k-th vehicle, they may alter their route choices, thus resulting in a different assignment of flows across the network. The aim of this paper is to investigate route choice behaviour changes as a result of the formation and dispersion of queues at stops within the framework of optimal travel strategies. A new model is developed, based on modifications of existing algorithms.     

Application of warm forming aluminum alloy parts for automotive body based on impact

Aluminum alloys are important technological materials for the application on lightweight design and development of vehicle body. The research works for characterizing warm forming behavior of aluminum alloys have generally reported. However, there were few researches focused on the flow behavior of warm forming aluminum alloy parts for the energy absorbing performance during crash. The tensile stress-strain response for warm forming AA5182 specimens tested under the strain rates of 0.0015 s^?1, 0.015 s^?1, 0.15 s^?1 and 1.5 s^?1 are presented in this paper. The data were fit to the Johnson-Cook constitutive model for the simulation of frontal impact. The energy absorbing performance of warm forming AA5182 parts were analyzed. The results show the higher flow stresses and lower fractured strain of warm forming aluminum alloy parts with the strain rate increasing. The flow stresses of warm forming aluminum alloy parts are insensitive to strain rate, while the fractured strain and elongation are sensitive to strain rate. The intrusion displacement of the warm forming aluminum alloy parts is appropriate for the satisfaction of vehicle body design avoiding the excessive deformation for the injury of passenger or the failure of frontal door opening. The feasibility of warm forming aluminum alloy parts is verified with the analysis of energy absorbing performance, stiffness and modal of vehicle body.