On the dynamics of oxygen,phosphorus and cyanobacteria in the Baltic Sea; A model study

Oxygen and phosphorus dynamics and cyanobacterial blooms in the Baltic Sea are discussed using results from the Swedish Coastal and Ocean Biogeochemical model (SCOBI) coupled to the Rossby Centre Ocean model (RCO). The high-resolution circulation model is used to simulate the time period from 1902 to 1998 using reconstructed physical forcing and climatological nutrient loads of the late 20th century. The analysis of the results covers the last 30 years of the simulation period. The results emphasize the importance of internal phosphorus and oxygen dynamics, the variability of physical conditions and the natural long-term variability of phosphorus supplies from land on the phosphorus content in the Baltic Sea. These mechanisms play an important role on the variability of available surface layer phosphorus in late winter in the Baltic Sea. The content of cyanobacteria increases with the availability of phosphorus in the surface layers of the Baltic proper and the probability for large cyanobacteria blooms in the model is rapidly increased at higher concentrations of excess dissolved inorganic phosphorus in late winter. The natural increase of phosphorus supplies from land due to increased river runoff since the early 1970s may to a large degree explain the increased phosphorus content in the Baltic proper. Another significant fraction of the increase is explained by the release of phosphorus from increased anoxic areas during the period. These results refer to the long-term variability of the phosphorus cycle. In accordance to earlier publications is the short-term (i.e. interannual) variability of the phosphorus content in the Baltic proper mainly explained by oxygen dependent sediment fluxes.     

Comparison of sediment profile image data with profiles of oxygen and Eh from sediment cores

A study of oil and gas development in the Gulf of Mexico provided a unique opportunity to compare data from sediment profile images (SPI) with that of sediment cores collected at locations in the central Gulf of Mexico from 1034 to 1175 m. Variables measured from SPI included sediment grain-size, sediment texture, apparent depth of oxygen penetration (aDOP) into the sediments, and parameters related to biogenic activity (tubes, burrows, feeding pits or mounds, and subsurface feeding voids). Variables measured from the sediment cores included sedimentation rate, dissolved oxygen profiles, and redox potential (Eh). There was a high degree of concordance between the two data sets based on correlation analysis. For example, the correlation between aDOP and maximum penetration of oxygen into the sediment was 0.69. For deep-sea sediment, SPI provides a means by which general geochemical conditions of near surface sediment can be remotely assessed providing a quick method for mapping surficial geochemistry over large areas.     

Considering “Coastal Carbon” in Existing U.S. Federal Statutes and Policies

Coastal ecosystems such as mangroves, salt marshes, and seagrasses provide important ecosystem services, including nursery habitat for fish, shoreline protection, and the recently recognized service of carbon sequestration and storage. When these wetland ecosystems are degraded or destroyed, the carbon can be released to the atmosphere, where it adds to the concentration of greenhouses gases (GHGs) that contribute to climate change. Many federal statutes and policies specifically require that impacts on ecosystem services be considered in policy implementation. Yet, no federal statute, regulation, or policy accounts directly for the carbon held in coastal habitats. There are a number of federal statutes and policies for which coastal carbon ecosystem services could reasonably be added to environmental and ecosystem considerations already implemented. We look at a subset of these statutes and policies to illustrate how coastal carbon ecosystem services and values might affect the implementation and outcomes of such statutes generally. We identify key steps for the inclusion of the ecosystem services of coastal habitats into the implementation of existing federal policies without statutory changes; doing so would increase the degree to which these policies consider the full economic and ecological impacts of policy actions.     

One-dimensional modelling of the plankton ecosystem of the north-western Corsican coastal area in relation to meteorological constraints

In order to study the influence of wind mixing on the spring variability of the plankton production of the north western Corsican coastal area, a one-dimensional (1D), vertical, coupled hydrodynamic/biological model (ECOHYDROMV) is used. A hydrodynamic 1D model of the water column with a k–l turbulent closure is applied. The biological model comprises six state variables, representing the plankton ecosystem in the spring period: phytoplankton, copepods, nitrate, ammonium, particulate organic matter of phytoplanktonic origin and particulate organic matter of zooplanktonic origin. The system is influenced by turbulence (expressed by the vertical eddy diffusivity), temperature and irradiance. The model takes into account momentum and heat surface fluxes computed from meteorological data in order to simulate a typical spring atmospheric forcing for the considered area. Results show that primary production vertical structure is characterised by a subsurface maximum which deepens with time and is regulated by the opposite gradients of nitrate concentration and irradiance. Surface plankton productivity is mainly controlled by turbulent vertical transport of nutrients into the mixed layer. The short time scale variability of turbulent mixing generated by the wind appears to be responsible for the plurimodal shape of plankton blooms, observed in the considered area. Furthermore, the model is applied to the study of the spring evolution of the plankton communities off the bay of Calvi (Corsica) for the years 1986 and 1988. In order to initiate and validate the model, time series of hydrological, chemical and biological data have been used. The model reproduces accurately the spring evolution of the phytoplankton biomass measured in situ and illustrates that its strong variability in those years was in close relation to the variability of the wind intensity.     

Carbon flux in ice–ocean–plankton systems of the Bellingshausen Sea during a period of ice retreat

Most analyses of marine microbial systems in the seasonally ice covered areas of the Southern Ocean have been based on data from the major embayment areas of the Ross and Weddell Seas. In this study data were collected at stations covering a range of regimes from full ice cover through to open water in the Bellingshausen Sea. A major feature of the production system was a rapid retreat of the ice-edge, which uncoupled the marginal ice zone from a phytoplankton bloom which remained associated with a frontal system. This bloom was maintained, and probably initiated, in an unusual environment generated by the interaction between the marginal ice zone and the front. Size-based analyses of the microbial system were derived for ice-covered, recently ice-covered and open water sites. Estimates of standing stocks and key rate processes were combined to produce a single food web network for each station. The under-ice system was one of low production and low recycling but apparently high retention. As the ice retreated the microbial systems to the north began to develop, but these were constrained by grazing pressure. The bloom in the area appeared to be sustained even though estimated losses were far higher than production, although the high sedimentation losses expected were not observed. The carbon flow networks are discussed in relation to the environmental changes and the interaction of the marginal ice zone and the frontal system appears crucial to the phytoplankton. Microzooplankton grazing is implicated as a major controlling factor. The local microbial dynamics are strongly influenced by material which was produced at an earlier time and somewhere else in the Southern Ocean.     

Numerical calculation of coupled damage effects on ship subjected to internal blast loading of warhead北大核心CSCD

［Objective］This paper studies the coupled damage effects of a ship's structure due to the internal blast loading of a warhead. ［Methods］Blast tests with cased charge data are conducted to verify the effectiveness of the coupled SPH-FEM approach, and numerical calculations are then performed on real ship compartment scale model tests to analyze the coupled fragmentation and shockwave damage effects of an explosion in a confined cabin.［Results］The results show that the fragments caused by the detonation of the warhead will first cause local damage to the cabin structure. The shockwave will exacerbate the local damage, and blasted openings will further increase the space for the propagation and diffusion of the shockwave inside the chamber, which will in turn cause damage to the adjacent structures. The simple equivalence of the warhead to a bare charge does not give a true picture of the effect of the warhead on the ship's structure, and fragmentation plays a significant role in the detonation of the warhead.［Conclusions］The results of this study show that employing the coupled SPH-FEM numerical method to calculate the coupling damage effects on a ship's structure can accurately reproduce the warhead damage pattern in tests, thereby providing support for the improved assessment of the damage of naval structures under warhead detonation. © 2022 Chinese Journal of Ship Research. All rights reserved.     

Development and prospects of key technology for submarine atmospheric environment control北大核心CSCD

Air regeneration, harmful gas purification and atmospheric composition monitoring are the key technologies of submarine atmospheric environment control systems. After years of development, China has made great progress in such systems, which have developed from ensuring the safety requirements of submariner and equipment operation to ensuring the health of submariner and reliability of system for long-term underwater operation. This paper reviews the development history of submarine atmospheric environment control technologies and introduces their future development prospects. The developers of integrated atmospheric environment control technology should learn from foreign submarine and aerosphere equipment technologies, which aim to support long-term submerged operation and comfort demands, and better adapt to future submarine technology development and evolving mission, in order to constantly enhance the level of submarine cabin air quality of the Chinese navy. © 2022 Journal of Clinical Hepatology. All rights reserved.     

Measurement of air–water CO2 transfer at four coastal sites using a chamber method

We measured the air–water CO₂ flux in four coastal regions (two coral reefs, one estuary, and one coastal brackish lake) using a chamber method, which has the highest spatial resolution of the methods available for measuring coastal air–water gas flux. Some of the measurements were considerably higher than expected from reported wind-dependent relationships. The average k₆₀₀ values for Shiraho Reef, Fukido Reef, Fukido River, and Lake Nakaumi were 1.5 ± 0.6, 3.2 ± 0.3, 0.69 ± 0.26, and 2.2 ± 0.9 (mean ± S.D.) times larger than the wind-dependent relationships. Results were compared with current-dependent relationships and vertical turbulence intensity (VTI). VTI is an index of water-surface stirring and is calculated from near-surface vertical velocity. Although some measurements from the reefs and river closely matched those expected from wind-dependent relationships, others were considerably higher. All data were correlated with VTI and were qualitatively explained by bottom macro-roughness enhancement. In Lake Nakaumi, results tended to differ from the wind-dependent relationships, and the difference between the measured and expected gas-transfer velocity was correlated with biological DO changes and/or the intensity of density stratification. We found these factors to have important effects on coastal gas flux. In addition, the chamber method was an effective tool for evaluating coastal gas flux.     

A porous cell method for the simulation of fluid-solid interactions

There are many ways of describing a solid,porous or fluid region of the computational domain when solving the Navier-Stokes equations(NSE)for flow motions.Amongst these the porous cell method is one of the most flexible approaches.In this method,a parameter is defined as a ratio of the volume open to water and air in a calculation cell to its cell volume.In the calculation,the same numerical procedure is applied to every cell and no explicit boundary conditions are needed at solid boundaries.The method is used to simulate flow through porous media,around solid bodies and over a moving seabed.The results compare well with experimental data and other numerical results.In our future work the porous cell method will be applied to more complex fluid-solid interaction situations.