车身壁板自由阻尼层稳健性优化设计

在车身壁板自由阻尼层的优化设计中,提出了考虑阻尼材料参数不确定性波动的稳健性优化设计方法。首先,在车身防火墙、地板和顶棚等区域全敷阻尼材料;其次,以等效辐射声功率(ERP)为优化目标对阻尼层布局进行拓扑优化并验证优化效果;最后,以阻尼层厚度为随机设计变量,损耗因子和弹性模量为随机变量,质量最小为优化目标,并结合径向基函数(RBF)近似模型、蒙特卡洛模拟(MCS)和序列二次规划算法(SQP)对阻尼层进行6σ稳健性优化设计。结果表明,优化后车身自由阻尼层的总质量减少了50.45%,并且车身结构噪声性能达到了6σ质量水平,实现了保证车身轻量化要求下的阻尼层稳健性优化的目标。     

浙江海事:奏响助力复工复产“春耕曲”

阳春三月,暖意浓浓。伴随着机器作业的轰鸣声,浙江舟山舟岱跨海大桥3座通航孔桥共计16台桥面吊机全部吊装安放并相继投入使用,标志着舟岱跨海大桥将全线进入到通航孔桥桥面吊装的全面冲刺阶段。今天有返工人员吗?体温测量工作完成了吗?有无体温异常人员?3月15日.     

柴油机增压器包覆层隔声性能试验分析及优化设计

提出一种船用增压器的包覆层结构,其内层为绝热材料和吸声材料,外层为金属薄片。采用统计能量法(SEA)建立该结构的中高频段隔声数值模型,开展包覆层的隔声试验,隔声量实测值与仿真结果吻合较好,能验证数值建模的有效性。对包覆层的吸声材料的厚度、密度和流阻等参数进行优化设计,利用正交试验法设计数值试验组,采用极差和方差分析法分析影响材料隔声性能的关键因素,得出最重要的影响因素是材料厚度,在选型设计中还应考虑密度和流阻因素。当安装厚度受限时,可通过改变密度和流阻值来提高材料的隔声量。     

区域多机场系统辐射域竞争均衡模型研究

辐射域竞争与协同态势,体现了多机场系统内各机场的竞争力。本文基于Lotka-Volterra模型对区域多机场系统内的交叉腹地进行竞争均衡研究,以机场综合实力为影响因子,选择各机场在交叉腹地的市场份额为因变量,求解两机场间的竞争稳定状态及满足条件。以长三角机场群内南京禄口机场、杭州萧山机场的腹地交叉区域为例,对其进行数值仿真。结果表明,当两机场间的综合实力比值均大于腹地交叉区域旅客对相应机场的需求量时,两机场将实现各自在辐射域交叉部分的竞争均衡。这为机场提升自身在区域多机场系统内的竞争力提供了一种理论分析方法。     

基于人体损伤的低速气囊标定研究

文章应用整车碰撞有限元模型与THUMS人体模型,对该车低速碰进行了气囊匹配分析,分析了该车在25kmph、28kmph、30kmph、32kmph的低速碰撞情况的人体伤害情况,得出了该车在30kmph时,且气囊在35ms起爆时,人体伤害最小的结论。     

乘用车车内噪声与主观评价相关性分析

文章选取了7辆车进行噪声舒适性主客观评价试验,客观评价指标为驾驶员耳边噪声值,主观评价指标为滚动噪声、边棱敏感性等5个,评车师根据试验情况对试验车各指标进行打分并给出总分值。比较了不同试验车速车辆前后排的噪声值,并对主、客观数值进行多元回归分析。     

Gender differences in commuting travel in the U.S.: interactive effects of race/ethnicity and household structure

Transportation - This research investigates the interactive effects of the household structure and race/ethnicity on gender differences in commuting travel in the United States. Existing research...     

扣式锌银二次电池锌负极性能的研究

本文研究在锌粉中添加氧化铅后分别加入银粉、锡酸钠、氢氧化钙、及氧化铝制备不同组成的锌负极的性能,对合成的锌负极的析气量进行了检测分析,对组成的XR41电池循环性能进行研究.结果表明,锌粉中添加氧化铅、锡酸钠的锌负极析气量最小,为0.16 ml/(2g·10d).制备的电池具有较好的循环寿命.     

Two-dimensional numerical simulation of an elastic wedge water entry by a coupled FDM-FEM method

Hydroelastic behavior of an elastic wedge impacting on calm water surface was investigated. A partitioned approach by coupling finite difference method (FDM) and finite element method (FEM) was developed to analyze the fluid structure interaction (FSI) problem. The FDM, in which the Constraint Interpolation Profile (CIP) method was applied, was used for solving the flow field in a fixed regular Cartesian grid system. Free surface was captured by the Tangent of Hyperbola for Interface Capturing with Slope Weighting (THINC/SW) scheme. The FEM was applied for calculating the structural deformation. A volume weighted method, which was based on the immersed boundary (IB) method, was adopted for coupling the FDM and the FEM together. An elastic wedge water entry problem was calculated by the coupled FDM-FEM method. Also a comparison between the current numerical results and the published results indicate that the coupled FDM-FEM method has reasonably good accuracy in predicting the impact force.