Modeling traffic operation at signalized intersections without explicit left‐turn yielding rules with an enhanced cell transmission model

This paper presents an enhanced cell transmission model (CTM) to capture traffic operation at signalized intersections without explicit permissive left‐turn yielding rules (i.e. aggressive permissive left‐turn maneuvers may not necessarily yield to opposing through traffic), which can be widely observed in many developing countries. Different from previous studies that focus on traffic dynamics on approaching links, this study contributes to modeling traffic operations within the intersection. A novel cell transmission framework with various types of virtual cells is proposed to model the dynamics of traffic movements from approach to exit. The unique phenomenon of competitive occupying of the conflict point between the left turn and opposing through movements is modeled. The cell state indicating its blockage is proposed to capture the dynamic queue formulation and dissipation and to evaluate the operational traffic performance at the intersection. Field validation results show that the proposed model can capture the operation of traffic at signalized intersections without explicit permissive left‐turn yielding rules with significantly higher level of accuracy than traditional traffic flow models. Copyright © 2016 John Wiley & Sons, Ltd.     

高烈度地震区公路隧道洞口段地震响应分析

根据隧道地震安全性评价报告和地勘资料,建立了三维数值计算模型并采用一致粘弹性人工边界模拟动力边界,对高烈度地震区公路隧道洞口段进行了瞬态动力计算。计算结果表明:在三向地震荷载激励下,洞口段衬砌的地震响应具有明显滞后性,衬砌以水平横向振动为主、轴向振动次之、竖向振动最弱;洞口段衬砌的拱腰部位将承受极大拉应力和剪应力,可设减震层吸收地震能量。通过对衬砌相对位移的分析得出,衬砌横向和轴向变形都很小,衬砌稳定性尚好。     

涂层与阴极保护下的管道外腐蚀研究与控制

长期以来 ,一直认为管道在涂层和阴极保护协同保护下不会产生外壁腐蚀或腐蚀轻微。应用第三代高精度智能清管检测器对榕山—佛荫长为 2 5 4km的管线进行检测 ,发现了 455处外壁腐蚀 ,研究结果表明 :管道建设时 ,涂层施工的质量较差 ;使用维护过程中涂层材料老化严重、失修 ;管线上阴极保护系统长期故障使管道欠保护 ;执行了有严重缺陷的行业标准 ,至今不知管线上监测到的保护电位距真实的极化电位的差距有多大 ;管线的阴极保护度数据难以采集到。针对上述问题提出了控制腐蚀的方法。     

Large-scale evacuation network optimization: a bi-level control method with uncertain arterial demand

To improve the efficiency of large-scale evacuations, a network aggregation method and a bi-level optimization control method are proposed in this paper. The network aggregation method indicates the uncertain evacuation demand on the arterial sub-network and balances accuracy and efficiency by refining local road sub-networks. The bi-level optimization control method is developed to reconfigure the aggregated network from both supply and demand sides with contraflow and conflict elimination. The main purpose of this control method is to make the arterial sub-network to be served without congestion and interruption. Then, a corresponding bi-objective network flow model is presented in a static manner for an oversaturated network, and a Genetic Algorithm-based solution method is used to solve the evacuation problem. The numerical results from optimizing a city-scale evacuation network for a super typhoon justify the validity and usefulness of the network aggregation and optimization control methods.     

高黏改性剂与基质沥青配伍性研究

为了在有限样本条件下得到高黏改性剂优选基质沥青的控制指标,对境内外2种高黏改性剂与4种常用基质沥青进行配伍性试验,并以针入度、软化点、低温延度、60℃动力黏度及170℃布氏黏度为控制指标,从而得出配伍性最佳的基质沥青,然后分别对每种基质沥青进行针入度、软化点、延度等全套常规性能试验和不同老化程度的温度扫描、频率扫描等流...     

公路岩质边坡稳定性的工程地质分析

岩质边坡稳定性问题对公路工程建设的决策、造价和工期具有重要的影响和作用;同时,它还是公路边坡工程设计与施工的重要依据条件之一。针对漳龙高速公路XX段岩质边坡的稳定性问题,从边坡的地形地貌特征、岩石类型与特征、岩体结构类型与特性、结构面发育度与优势面状态等多方面因素,并采用赤平极射投影法;对该段岩质边坡的稳定性进行定性的工程地质分析。     

Approximate optimal AUTOSAR software components deploying approach for automotive E/E system

The AUTOSAR has been developed as the worldwide standard for automotive E/E software systems, making the electronic components of different suppliers to be employed universally. However, as the number of component-based applications in modern automotive embedded systems grows rapidly and the hardware topology becomes increasingly complex, deploying such large number of components in automotive distributed system in manual way is over-dependent on experience of engineers which in turn is time consuming. Furthermore, the resource limitation and scheduling analysis make the problems more complex for developers to find out an approximate optimal deploying approach in system integration. In this paper, we propose a novel method to deploy the AUTOSAR components onto ECUs with the following features. First, a clustering algorithm is designed for deploying components automatically within relatively low time complexity. Second, a fitness function is designed to balance the ECUs load. The goal of our approach is to minimize the communication cost over all the runnable entities while meeting all corresponding timing constraints and balancing all the ECUs load. The experiment results show that our approach is efficient and has well performance by comparing with other existing methods in specific and synthetic data set.     

柴油机气门导管断裂影响因素分析及改进

针对某柴油机气门导管在整机台架试验过程中发生的横断和纵裂失效故障,对气门导管的材料性能、结构应力、微动磨损、热变形、装配工艺等影响因素进行了分析。分析结果表明:材料力学性能差和装配过盈量较大造成的应力集中和微动磨损是气门导管横断的主要原因;液氮人工压装的装配工艺是造成气门导管纵裂的主要原因。据此提出新方案气门导管,并通过了整机台架试验验证。     

OGFC混合料设计参数影响因素研究

近年来有关专家学者对OGFC沥青混合料的物理及力学性能差异性研究较多,但对相应的成型因素对设计参数的影响研究较少。为此,针对OGFC-13混合料成型因素对其性能影响,进行了较为系统的研究。结果表明:对改性沥青拌制的OGFC混合料而言,最佳的施工温度应尽量控制在160~180℃之间;采用同一级配时,油石比的变化对马歇尔指标变化也有一定的影响;击实75次是临界值。     

车用发动机动态排放测试系统及其应用

介绍了某汽车开发中心发动机动态排放测试系统的系统构成、系统集成方法及部分试验结果。提出了发动机动态排放测试系统的具体构成，比较分析了发动机／测功器控制子系统的各种类型。由此，得出动态排放测试系统的设备选型及实施方案，并通过图形给出系统安装调试完成后的试验结果。