基于规范方法的小水线面双体船疲劳强度研究

论文介绍了船舶结构疲劳强度评估基本原理,并对一条2200t级小水线面双体船进行规范法疲劳强度评估。针对小水线面双体船结构特点,采用规范进行疲劳载荷计算;结合全船有限元计算结果进行疲劳部位筛选;采用有限元法提取疲劳部位的热点应力,并计算疲劳部位的累积损伤度。分析计算结果,提出疲劳部位优化方案。     

Property Evolution of Sulphoaluminate Grouting Material under Pressure Circulation北大核心CSCD

Water-sealed underground oil tank projects are quite different from traditional underground projects since the water-sealing conditions are very strict and the difficulties caused by the geological specificity, structural specificity and construction specificity are key factors affecting the project. In light of the significant early initial setting time and rapid temperature increase of sulphoaluminate cement-based grouting material for a large domestic water-sealed underground oil tank with pressurized cyclic grouting, a laboratory grouting simulation is conducted. It is found that the properties of the sulphoaluminate cement-based grouting material are quite different under different pressure cycles, the hydration exothermic peak time gets shorter with an increase of circulation time, the compressive strength decreases with an increase of circulation time, and the longer the circulation time the more obvious the de-crease of compressive strength. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Soil Body Deformation Caused by Construction of a Double-Line Shield Tunnel with Multiple Factors北大核心CSCD

Considering the influence of many factors (soil loss, frontal additional thrust, the friction force of the shield shell and the additional grouting force), a method for improving the uniform soil body movement model is pro-posed, and a mechanical calculation model is established to study the calculation method for soil body deformation caused by double-line parallel shield driving. Based on the Mindlin solutions of elastic mechanics, the theoretical solutions for soil body deformations caused by the last three factors are calculated; considering the uniform soil body movement model, the theoretical solutions for soil body deformations caused by soil loss are calculated, then the to-tal theoretical solutions for soil body deformations under multiple factors are obtained by means of superposition. The vertical surface settlement, vertical horizontal displacement, and vertical displacements of the soil body at different depths of Hangzhou Metro Line 1 are calculated to analyze the variation laws. Meanwhile the influential factors for horizontal displacement variation are studied. The research shows that with a change of depth, the settlement of the soil body changes within the scope of 10 to 13 m in the horizontal direction near where the maximum settlement occurs;the direction of the horizontal displacement of the soil body changes with a change of the positional relationship be-tween the calculation points and the tunnel; and with an increase of interval J for the two tunnels, the horizontal dis-placement of the soil body of a deep double-line tunnel decreases while the displacement near the surface changes slightly. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

中国近周边海域船舶排放清单及排放特征研究

为分析我国沿海船舶大气污染物排放特征,本研究以船舶自动识别系统数据为基础,收集整理国内外船舶静态数据、排放参数,结合船舶实际航行资料,采用动力法估算了中国近周边海域2014年的船舶排放清单,并分析了靠港、锚泊、港内机动、低速、巡航5个船舶状态下的排放特征,按不同海区对排放进行了统计,并给出了我国三个排放控制区的船舶大气污染物排放情况。结果表明,中国近周边海域范围内由于船舶活动一年产生的硫氧化物、氮氧化物、PM10分别约为87.98万吨、137.84万吨、11.73万吨。排放源分析表明,在船舶的主机、辅机和锅炉3种排放源中,主机是主要排放源,且在航行状态上低速巡航状态排放最大。船舶排放污染物的空间分析表明,90%的船舶排放发生在海岸线至领海基线外96海里范围内,即距离陆地200公里的海域内。     

内蒙古交通环境监测信息处理平台的构建与应用

针对内蒙古自治区公路建设里程逐年快速增长的发展态势,建立与完善交通环境监测信息处理平台,是动态掌握区域内交通环境质量状况与变化趋势的重要途径。基于内蒙古自治区交通运输环境监测网络建设试点工程,通过集成在线监测设备、地理信息技术、数据统计与分析等技术,建成了内蒙古交通环境监测信息处理平台,从而为自治区交通环境监督管理和宏观决策提供了有力的基础数据和技术支撑。     

沥青路面抗滑性能衰减特性及评价指标适用性探讨

本文分析了沥青路面抗滑机理及目前检测评价指标,路面微观纹理及宏观构造是影响沥青路面抗滑性能的最主要因素,不同级配及粗集料的沥青混合料路面抗滑性能特点及规律有显著差异。根据运营某高速公路SMA类沥青混合料路面抗滑性能近5年的检测数据,探讨了针对SMA类沥青混合料采用横向力系数及构造深度作为沥青路面抗滑性能评价指标的适用性,建议运营高速沥青路面抗滑性能技术状况的检测增加构造深度指标,多维度对沥青路面抗滑性能进行安全有效的评定,利于绿色低碳公路养护技术的发展。     

基于碳纤维电热法的公路桥梁融冰研究

为了研究公路桥面融冰问题,通过分析桥面融冰热力学原理,建立桥面电热法融冰的传热有限元分析模型,得到了桥面温度场分布。通过现场埋设碳纤维发热线和温度传感器,对实桥进行桥面温升试验,分析了实桥温升规律。在冰雪气候环境条件下,进行实桥融冰雪试验。研究结果表明,碳纤维线缆电热法进行桥面融冰,桥面局部最高温度不超过45℃,桥面温度变化均匀连续,通电3.5小时,桥面上面层最低温度大于零度,通电4.2小时后,桥面结构温度场分布趋于稳定,上面层温度达到2.5℃。     

永磁同步电机直接转矩控制的建模与仿真研究

为了研究永磁同步电机直接转矩控制系统的动态性能,利用Matlab/Simulink建立了永磁同步电机直接转矩控制模型,并对电机的启动性能以及负载为阶跃输入情况进行了仿真分析,仿真结果表明所构建的系统模型动态过程符合实际调速系统运动过程。     

Bicycle mode share in China: a city-level analysis of long term trends

In the past 15 years, cities in China have experienced big changes in socioeconomic and traffic conditions, resulting in a long term change in bicycle use. This study aims to quantify the changes in bicycle mode share in Chinese cities and explore the potential causes. Based on data from 51 cities, it is found that bicycle mode share at the city level decreased gradually in the past. Conventional bicycle mode share decreased with a rate of 3 % per year, but electric bicycle mode share increased with a rate of 2 % per year. The correlations between city features such as demographics and built environments and bicycle mode share at different city sizes are compared. The generalized linear models are estimated to relate the changes in the share of different trip modes to various city-level factors. The results show that the bicycle mode share in a city is impacted by factors including city area size, population density, number of cars, percentage of local road mileage among all roads, and trip purpose. Possible reasons for the changes in bicycle uses in Chinese cities are explored and policy implications are discussed.     

Isolating high-priority metro and feeder bus transfers using smart card data

Fixed-rail metro (or ‘subway’) infrastructure is generally unable to provide access to all parts of the city grid. Consequently, feeder bus lines are an integral component of urban mass transit systems. While passengers prefer a seamless transfer between these two distinct transportation services, each service’s operations are subject to a different set of factors that contribute to metro-bus transfer delay. Previous attempts to understand transfer delay were limited by the availability of tools to measure the time and cost associated with passengers’ transfer experience. This paper uses data from smart card systems, an emerging technology that automatically collects passenger trip data, to understand transfer delay. The primary objective of this study is to use smart card data to derive a reproducible methodology that isolates high priority transfer points between the metro system and its feeder-bus systems. The paper outlines a methodology to identify transfer transactions in the smart card dataset, estimate bus headways without the aid of geographic location information, estimate three components of the total transfer time (walking time, waiting time, and delay time), and isolate high-priority transfer pairs. The paper uses smart card data from Nanjing, China as a case study. The results isolate eight high priority metro-bus transfer pairs in the Nanjing metro system and finally, offers several targeted measures to improve transfer efficiency.