地铁高架线过地裂缝段应对措施研究

地裂缝是西安特有的区域性地质灾害.西安地铁3号线一期工程是国内首条高架桥跨越地裂缝的地铁线路,国内目前对其应对措施尚无深入研究.以西安地铁3号线一期工程为例,重点结合高架桥梁结构,以桥梁基础产生不均匀沉降为前提,通过对线路调坡、桥梁梁型和支座造型以及轨道结构处理措施等三方面综合研究分析,提出了简支梁桥和可调式框架板道床配合线路适应性调坡的方案,希望对后续类似工程起到参考、借鉴的作用.     

Modeling and control of the pulley buffer system of arresting cable for shipboard aircraft based on magneto-rheological fluid

Taking the MK7-3 of USA hydraulic buffer arresting device as the research subject, the dynamical model for the shipboard aircraft arresting system is established, and the magneto-rheological (MR) damper is applied to pulley shock absorbers for shipboard aircraft block system. Due to the effect of the MR damper has not been known completely and so far MR damper model has not been defined, we use a set of characteristic test of the MR damper, through the process of parameters identification, to establish the dynamical model for the MR damper based on the Bingham plastic model. Then, the fuzzy control rules are designed, the buffer control for the pulley buffer of shipboard aircrafts is completed in touchdown moment based on MR technology. Compared with blocking device of hydraulic pulley buffer in the same condition, the simulations results show that the proposed MR pulley buffer can effectively recognize the impact energy for shipboard block system and reduce the pull peak of arresting cable. It improves significantly safety during landing of the air vehicles and lowers the risk of accidents.     

基于特征模型的船舶运动数学模型

为了获得形式简洁而精度较高的船舶运动数学模型,将航空航天领域的特征模型移植到航海领域.利用部分实船试验数据辨识出特征模型的参数,通过船舶Z形试验验证了在航海领域使用特征模型的可行性.该精度稍高于目前使用的Nomoto模型,且保留了其简洁的形式.     

FFA回归

FFA,不是美丽的罂粟花,一次次的滑铁卢,错在我们迷失了航向。2008年,国内曾集中出现一系列衍生品亏损事件,中国远洋的FFA亏损当年在航运圈引起震动,其实当时除了中国远洋外,还有例如东航、国航燃油套保亏损,中信泰富澳元套保巨亏,深南电原油套保事件等,此后传出政府限制国有航运公司参与运费衍生品交易的消息。国内谈及衍生品交易就很自然和亏损联系在一起,似乎国内企业都在衍生品交易方面吃了大亏,其实不然,尽管一些大型企业在衍生品交易方面屡屡遭遇滑铁卢,但是依然有很多企业依靠良好的风险控制取得了不错的成绩。     

An advanced risk analysis approach for container port safety evaluation

Risk analysis in seaports plays an increasingly important role in ensuring port operation reliability, maritime transportation safety and supply chain distribution resilience. However, the task is not straightforward given the challenges, including that port safety is affected by multiple factors related to design, installation, operation and maintenance and that traditional risk assessment methods such as quantitative risk analysis cannot sufficiently address uncertainty in failure data. This paper develops an advanced Failure Mode and Effects Analysis (FMEA) approach through incorporating Fuzzy Rule-Based Bayesian Networks (FRBN) to evaluate the criticality of the hazardous events (HEs) in a container terminal. The rational use of the Degrees of Belief (DoB) in a fuzzy rule base (FRB) facilitates the implementation of the new method in Container Terminal Risk Evaluation (CTRE) in practice. Compared to conventional FMEA methods, the new approach integrates FRB and BN in a complementary manner, in which the former provides a realistic and flexible way to describe input failure information while the latter allows easy updating of risk estimation results and facilitates real-time safety evaluation and dynamic risk-based decision support in container terminals. The proposed approach can also be tailored for wider application in other engineering and management systems, especially when instant risk ranking is required by the stakeholders to measure, predict and improve their system safety and reliability performance.     

基于生命周期理论的我国收费公路发展分析

收费公路类似自然生命,其成长和发展必然为一个具有若干阶段的连续过程。基于生命周期理论,对我国收费公路体系生命周期进行了探讨和分析。结果表明,2000年以后,我国收费公路进入成熟期;在2030年达到峰值后,收费公路在总量上开始缩减,进入衰退期,新的发展趋势也将逐渐体现。     

世界汽车技术发展动向

1新能源汽车发展迅速新能源汽车发展非常迅速,其主要贡献来自于混合动力乘用车。据市场调研机构Databeans预测,到2017年,全球纯电动汽车和混合动力汽车销售量将达到420万辆。丰田公司预计2013～2015年,混合动力汽车每年的全球销量将超过100万辆。2011年底,全球新能源汽车累计销量     

30CrMnTi合金钢热处理工艺研究

针对30CrMnTi合金钢进行了相应的淬火和回火工艺试验研究,通过系列实验比较了不同浓度的AQ251淬火液和回火温度对30CrMnTi合金钢热处理后的组织和硬度的影响。结果表明AQ251淬火液在高温阶段600℃和低温阶段350℃有较大冷却速度;随着淬火介质浓度的减小,30CrMnTi合金钢淬火硬度呈上升趋势;在350℃以下回火,回火温度对硬度影响不明显,超过350℃回火,硬度随温度增加降低显著。     

舰船物资转运方案计算机辅助决策算法研究

瞬息万变的现代战场对大中型水面战斗舰船甲板物资转运的效率提出越来越高的要求。引入计算机辅助决策技术,在考虑多种牵制因素的情况下,快速获得最优的物资转运方案。详细分析和阐述舰船物资转运线路规划、时间计算、作业排序以及资源配班等4个主要问题的计算机解决方法,为利用计算机辅助制定最优物资转运方案提供可行途径。     

国外连续配筋混凝土路面应用和研究现状

为了使连续配筋混凝土路面在我国得到应有的推广和应用，总结了国外连续配筋混凝土路面在工程中的应用情况，以及对该类型路面的研究过程、研究方法和取得的成果，可为我国相关学者进行研究，建立符合我国环境类型的设计规范和施工方法，提供较为详实的第一手资料。