美国焊接桥梁的疲劳设计准则

50年前,疲劳设计在美国人看来并非是一个很严重的桥梁性能问题.疲劳设计运用了限制最大应力的概念,即假定疲劳极限发生在2×106次循环荷载时,利用最小应力与最大应力的比R,限制各点的最大应力.根据道路类型与每日平均车流量,采用型号为HS-20的设计车来测定特定周期.在20世纪60年代末至70年代初,发现钢结构桥梁中存在疲...     

The potential for British coastal shipping in a multimodal chain

A strategy to revitalize coastal shipping within Great Britain is investigated. An examination of the regulatory environment shows government, at both the EU and British levels, aware of the environmental benefits of coastal shipping compared to road freight transport, if only mildly supportive in tangible terms. The geography of Great Britain and the modern preference for just-in-time deliveries have severely restricted the ability of coastal shipping to compete effectively with road freight transport. The primary objective of the paper is to investigate whether coastal shipping could be integrated into a multimodal door-to-door supply chain, where it is currently hampered by high costs of transhipment, slow transport speeds, and the incongruity of load sizes between land and sea modes. Integration requires the co-operation of all organizations within the multi-modal supply chain. However, coastal shipping companies have been known to be individualistic and mistrusting of alliances. Therefore, a Delphi study is undertaken to investigate the standpoint of leading managers in such companies towards multimodal integration. The results of the Delphi study indicate that managers are in favour of multimodal developments, in particular cooperation between coastal shipping and road haulage. However, there was agreement that the business is highly competitive, and this may prevent the forms of collaboration required for multimodal systems. The secretive nature of the coastal shipping sector could impede joint marketing to promote a mode of transport that is often ‘invisible’ to shippers. There was little consensus on the relationship that should exist between coastal shipping and ports, a topic worthy of further investigation.     

Recent developments in Flexible Transport Services

This paper focuses on recent experiences in the evolution of Flexible Transport Services (FTS). It describes how previous manifestations of FTS provided dedicated solutions for special groups, often in parallel to the conventional public transport network, but highlights that in numerous countries across Europe there is now a discernable trend towards open access FTS providing services for the whole community and often feeding the conventional public transport network to provide wider access and opportunities. This is as a result of policies intended to mainstream services for people with disabilities and moves to tackle social exclusion amongst other groups while at the same time reducing the very high costs per trip associated with STS.To meet these policies, and the higher expectations and different travel behaviours of citizens to-day, it is suggested that FTS will need to radically reposition itself in terms of scale, so that there is mass coverage and ability to function as a full transport mode. This will require breakthroughs in concepts; business models; organisational and operational models; and in supporting technologies. A proposed solution to this is the Flexible Agency for Collective Mobility Services (FAMS) which provides an organisational structure and business model for FTS that incorporates the required supporting technologies.     

The place of transport in facilitating social inclusion via the mediating influence of social capital

Social policy makers rarely associate the ability to be mobile with having a role in the facilitation of social inclusion. This paper provides an initial exploration of the association between a person’s travel patterns and their risk of social exclusion. Information is drawn from a major Australian Research Council transport study which interviewed 535 people from Metropolitan Melbourne, Australia. It includes an analysis of the extent of the person’s bonding and bridging social networks, their connectedness to the community, self-assessed level of well-being and their beliefs about whether or not they are able to control outcomes in their life. It was found that those who had the greatest risk of social exclusion, travelled less often and less distance, owned fewer cars and used public transport less, than those who were more socially included. However, those who were more at risk of social exclusion did not identify their lower trips as due to either a lack of transport, or problems with the public transport system. The ability to have good bridging networks appears to be related to increased trip-making and promotion of social inclusion but not necessarily self-assessed well-being which is satisfied by bonding networks.     

Socioeconomic factors affecting the job satisfaction levels of self-employed container truck drivers: a case study from Shanghai Port

The job satisfaction level (JSL) of self-employed container truck drivers (SCTDs) is vital to the container trucking industry’s (CTI) stability in China. An anonymous field survey of 645 SCTDs was conducted at Shanghai Port. Three ordered probit models were, respectively, developed to analyze the drivers’ JSLs, their attitudes, and reactions to a CTI downturn. This study contributes to the literature that the demographic variables were not statistically significant for the SCTDs’ current JSLs, while higher income SCTDs with fewer expenses were expected to have higher JSLs. During an industry downturn, drivers with families in Shanghai showed more job dissatisfaction. More working hours, lower income, expensive diesel fuel, a high consumer price index (CPI), and a low freight-to-distance ratio (FDR) significantly lowered the JSLs. An increase in the price of diesel fuel and the CPI, and a lower FDR exposed the industry to risk and instability. Additionally, credible evidence indicated that as the dissatisfaction levels of SCTDs rise in a downturn, SCTDs implement more practical measures that may negatively affect the industry’s stability as well as society’s. Based on these findings, managerial or policy implications were proposed to efficiently improve SCTDs’ JSLs and CTI stability in Shanghai.     

Workshop 1: Performance measurement and compliance

This workshop discussed challenges of measuring the performance of transport contracts, which is usually achieved by benchmarking the relevant services against a few key performance indicators (KPIs). Such KPIs (the workshop identified cost efficiency, service quality and safety/security as the top three) can be explicitly included in the contracts (with a focus on compliance) or can be rather informal and part of a trusting partnership. Limited availability of good data and appropriate information technology systems appear to be the greatest challenges within developed markets. In the context of creating a formal market (such as the South African taxi market), which encourages public transport measurement and compliance, our findings suggest that it is important to set as a first step minimum standards to address the backlog with respect to establishing performance measurement regimes.     

Groups in DEA based cross-evaluation: An application to Asian container ports

In container port performance evaluation, a group of ports in one country is always significantly different from a group of ports in another country. This is noticed as the heterogeneity of port performance. It is therefore necessary to further investigate the impact of the different groups on efficiency evaluation of ports. The cross-evaluation method is a DEA extension tool to identify best performing DMUs and to rank DMUs using cross efficiency scores linked to all DMUs. A factor that possibly reduces the usefulness of the cross efficiency evaluation method is that cross efficiency scores may not be unique due to the presence of alternative optima. Doyle and Green 1 Doyle, J and Green, R. 1994. Efficiency and cross efficiency in DEA: Derivations, meanings and uses. Journal of the Operational Research Society, 45: 567–578. [Taylor & Francis Online], [Web of Science ®] , [Google Scholar] propose the use of secondary goals to deal with the non-uniqueness issue by the aggressive/benevolent model formulations. This article extends the model of Doyle and Green by considering the groups of DMUs in the determination of final cross efficiency. A new approach based on cross efficiency evaluation method is developed and applied to efficiency analysis of 28 container ports from 12 countries in Asia. A comparative study between traditional and newly proposed methods is conducted.     

Performance evaluation of the inside intersection median-turn lane markings on the mobility and safety performance of signalized intersections in the Philippines and Japan

Signalized intersections are one of the key elements that play a vital role at road networks. The efficiency and safety levels of intersections can affect the operational performance of the whole system. In general, turning traffic, especially median-turning, has always been considered as the most problematic movement in the operation of intersections. This becomes more critical with high turning demand where exclusive turning lanes (single or double) can be assigned to provide larger capacities for these movements and to reduce conflicts with through traffic. However, improper treatment of median-turn lanes could create cross-maneuvering behavior which may limit the expected increase in capacity and create safety issues. Median-turning lane markings are commonly provided at intersections in Japan to guide drivers while turning which is expected to reduce the conflicts among turning traffic. Meanwhile, in the Philippines, exclusive median-turn lanes are installed at intersections without proper treatment which may contribute to the low mobility and safety levels. Therefore, this study evaluated the impact of inside intersection lane markings on the operation of median-turn lanes in terms of mobility and safety. The vehicle maneuver, speed and interactions between the turning traffic were utilized as essential components for the assessment. The empirical analysis shows that conflicting trajectories were present on double turn lanes without median-turn lane markings in the Philippines, which resulted to serious conflicts among the turning vehicles and negatively influenced the turning speed and saturation flow rate of the turn lanes. On the other hand, the turn lane markings in Japan, provided a positive impact to mobility and safety of the turning lanes. Moreover, it was also found that the geometric characteristics and traffic signal phasing scheme highly affects the capacity and safety condition of signalized intersections.     

混凝土试验的重要性

混凝土由于其适应性强,长期以来被选作重大隧道工程的材料,这就使得严密而准确的混凝土试验显得十分重要.由于不经过现场的准确试验,拌合物的性质将会在极大的范围内变化,其结果是产生质量问题和安全度的降低.     

TBM及其在中国的应用(4)

3.12中国利用西方国家的TBM经验加速发展本国TBM技术的理由 3.12.1技术开发和革新是需要时间的