浅谈动车组转向架齿轮箱清洗检修设备验证与改造

对北京动车客车段动车检修基地前3列动车组检修设备验证实例进行了讨论,并结合设备改造情况进行了分析,提出了动车组检修设备验证、改造新思路。     

关于铁路光传输工程色度色散指标的研究

针对铁路光传输系统,阐述了光纤色散指标对传输系统技术性能的影响,建议修改现行光缆线路工程验收标准的有关规定,增加光纤色度色散指标验收测试项目,有效保证高速铁路传输系统的质量要求。     

气压ABS系统流量特性的实验研究

开发了气压ABS电磁阀测试系统，建立了气室充、放气过程压力变化的微分方程，结合两者研究了气压ABS系统的流量特性，获得了某中型客车ABS系统在不同情况下的流量系数。讨论了ABS电磁阀的结构参数和动作频率对整个系统流量特性的影响，并得到了几种典型动作频率下的流量系数。建立的气室压力模型和所求得的流量系数为气压ABS控制逻辑的设计提供了依据。     

机场跑道填缝胶的研究

通过制备聚硫填缝胶，并对其进行抗拉伸、耐高低温等性能测试，讨论溶剂、环氧树脂、DBP、填料、催化剂等各因素对其性能的影响，总结其最佳实验配方。     

基于多旅行商问题的应急设施服务区划分模型

基于多旅行商问题，增设集散中心需求及应急服务设施资源容量约束条件，以最小化遍历区域内全部集散中心的综合旅行时间成本为优化目标，构建一种应急设施服务区划分模型，确定各应急设施的服务区范围.设计一种复合算法求解模型，首先基于P-中值选址模型的优化理念，形成初始方案；继而加入禁忌搜索算法，结合LKH求解器对模型进行迭代优化求得最优解.基于宁波市北仑区实际拓扑网络进行案例分析，验证了模型和求解方法的有效性.     

成昆铁路矮塔斜拉桥索梁锚固区模型试验研究北大核心

为研究铁路矮塔斜拉桥索梁锚固区的受力形式,以成昆铁路金沙江大桥为工程背景,针对该桥采用的新型梁顶混凝土锚固构造,通过缩尺模型试验研究其在不同荷载下的应力分布和开裂特征。结果表明:在斜拉桥成桥恒载索力作用以及最不利荷载组合索力作用下,C7锚固块更容易发生破坏,将其作为试验构件开展缩尺模型试验,发现锚固块在不同张拉荷载作用下张拉至设计索力的过程中,应变增幅基本上线性增加,卸载后同样呈线性减小,说明混凝土受力处在线弹性阶段,且应力在规范要求范围内。在试验荷载加载至140%设计索力时,锚固块前端倒角位置开始出现细小裂纹且随荷载的增加不断开展。当荷载卸载至0时,之前出现的裂缝随荷载的减小逐渐闭合,宽度肉眼不可见,表明该构造能够满足正常使用要求且具备足够的安全储备。     

基于深度强化学习的智能船舶航迹跟踪控制

[目的]智能船舶的航迹跟踪控制问题往往面临着控制环境复杂、控制器稳定性不高以及大量的算法计算等问题。为实现对航迹跟踪的精准控制,提出一种引入深度强化学习技术的航向控制器。[方法]首先,结合视线(LOS)算法制导,以船舶的操纵特性和控制要求为基础,将航迹跟踪问题建模成马尔可夫决策过程,设计其状态空间、动作空间、奖励函数;然后,使用深度确定性策略梯度(DDPG)算法作为控制器的实现,采用离线学习方法对控制器进行训练;最后,将训练完成的控制器与BP-PID控制器进行对比研究,分析控制效果。[结果]仿真结果表明,设计的深度强化学习控制器可以从训练学习过程中快速收敛达到控制要求,训练后的网络与BP-PID控制器相比跟踪迅速,具有偏航误差小、舵角变化频率小等优点。[结论]研究成果可为智能船舶航迹跟踪控制提供参考。     

Development of knowledge based body structure concept design model

The purpose of this study is to propose a concept design process for an automotive body structure using technical information on the major joints and members of vehicles. First, in order to collect the technical information on major joints and members, 17 vehicles were selected using benchmark data. The collected technical information for the selected vehicles was the cross sectional shapes of each joint and member which were used for the analysis of joint stiffness, crashworthiness and static stiffness of the member to make a database along with cross section properties. This study applied a ‘What If Study’ technique to perform a concept design of an automotive body using the analyzed information and selected cross section meeting the design objectives. The criteria for the selection of the cross section were defined by subdividing the defined design objectives of an automotive body structure and constraints into members and joints. In order to configure an analysis model of an automotive body structure using the selected cross section, a shape parametric model was used and static stiffness, dynamic stiffness and crashworthiness were assessed to evaluate the configured automotive body structure. The evaluation result showed that the crashworthiness and static/dynamic stiffness were improved compared to an existing body structure. In addition, the weight of the body structure was reduced. Through this study, the process that can rapidly and effectively derive and evaluate the concept design of an automotive body structure was defined. It is expected that, henceforth, this process will be helpful for the study of automotive body structures.     

Nanoparticle emission characteristics and reduction strategies by boost pressure control and injection strategies in a passenger diesel engine

This research attempted to analyze nanoparticles and other harmful exhaust emissions in accordance with injection strategies and air-fuel ratio (AFR) changes for small diesel engines. The emission characteristics were analyzed in the medium-speed condition, which is the main driving range of a diesel engine. In the case of particulate matter (PM), the number of particles was measured, analyzed, and compared to identify the correlation and emission characteristics of nanoparticles by using a dilution device and condensation particle counter (CPC), which are international standards for particle measurement recommended by the Particulate Measurement Programme (PMP). The engine torque tended to be reduced as pilot injections were added, and the torque was increased by the increased boost pressure, but reduced by the exhaust pressure increase in a part of the low-load range. The number of nanoparticles was not influenced greatly by the change in AFR, but the reduction effect on the PM weight was great depending on the boost pressure increase. In addition, the number of nanoparticles tended to increase as the fuel injection timing became closer to TDC in all conditions, and its difference became larger with an increase in AFR. In addition, in the case of the pilot injection, nanoparticle emission showed similar characteristics depending on the main injection timing, but it was increased by advanced injection timing when performing the main injection only, and the number of the nanoparticles increased as pilot injections were added. Last, the optimal conditions for EMS calibration were analyzed by selecting the conditions of torque reduction and NOx increase within 5 % from all of the engine operating conditions; optimized conditions are presented.