Fuzzy-logic applied to yaw moment control for vehicle stability

In this paper, we propose a new yaw moment control based on fuzzy logic to improve vehicle handling and stability. The advantages of fuzzy methods are their simplicity and their good performance in controlling non-linear systems. The developed controller generates the suitable yaw moment which is obtained from the difference of the brake forces between the front wheels so that the vehicle follows the target values of the yaw rate and the sideslip angle. The simulation results show the effectiveness of the proposed control method when the vehicle is subjected to different cornering steering manoeuvres such as change line and J-turn under different driving conditions (dry road and snow-covered).     

Target priority determination methods by interval-valued intuitionistic fuzzy sets with unknown attribute weights

The paper aims at the problem of multi-targets threat degree being hard to be evaluated accurately in complex air defense battlefield environments. Combined with multi-sensors information fusion and interval-valued intuitionistic fuzzy sets (IVIFS) theories, the target priority determination is studied. The score and accuracy functions of IVIFS are improved with thinking about the hesitating information in order to increase the rationality. Then, the influence factors of target priority and the nonlinear relationship between the influence factors and target priority are analyzed. Next, the algorithms for calculating the factor weights and sensor weights are given. Based on the theory of IVIFS and technique for order preference by similarity to an ideal solution (TOPSIS), two methods of target priority determination based on the IVIFS and TOPSIS are proposed. At last, an application example verifies the effectiveness and flexibility of the proposed algorithms.     

Effect of interference fits on the fatigue lives of bolted composite joints

The effect of interference fits on the fatigue lives of bolted composite joints is investigated by conducting mechanical tests. Static and fatigue tests are carried out on specimens made of carbon-bismaleimide composites joined together as double-lap single-bolt joints. The bolts having interference fits ranging of 0 (neat fit), 0.5%, 0.75% and 1% are performed. The results demonstrate the relationship between fatigue life and different values of interference fits. After the fatigue tests, non-destructive evaluation (NDE) and scanning electron microscope (SEM) are used to observe the damage of the surrender and surface of the hole. The test results show that the interference fitted specimens have improved fatigue life compared to the neat fitted specimen. The NDE and SEM results reveal that the damage degree of interference fitted specimen is weaker than that for the neat fitted one.     

可持续交通——各方观点和长期挑战

从交通研究者和实践者的角度出发,以可持续交通这一概念为中心展开讨论。可持续交通宽泛地反映了可持续发展在交通领域的原则。随着可持续性这一概念的外延逐渐扩大,在它的定义、应用和价值取向上出现了不同观点。着重讨论可持续交通,以及如何理解和运用可持续交通,包括:1)将可持续性或者可持续发展作为一个整体的概念,包括关于可持续性的不同方法和定义之间的冲突;2)对可持续交通以及交通领域对其理解的探索;3)使用指标来实现可持续性的应用。然后识别了通往可持续交通之路的若干挑战,包括缺乏清晰定义、可持续性的固有冲突、可持续发展的跨领域本质、各种工作框架和指标体系、可持续发展的政治因素和交通领域实践中的不同观点。基于在该课题上的研究积累,总结解决这些问题的工作框架,提出因地制宜、注重结果、整体的方法来解决可持续交通中的挑战。     

Influence of vehicle driving parameters on the noise caused by passenger cars in urban traffic

In this work, a sample of vehicles has been instrumented to measure of variables that influence vehicle noise emissions in Madrid. A circuit reproducing a normal travel pattern in large city is traveled by a fleet of vehicle models representing the fleets of cars in a European city. A sample of drivers covers the test track under different traffic conditions. Driving parameters and noise emitted have been recorded in each test and average values have been extracted. These data have been analyzed to define the noise emissions produced by a vehicle in real driving conditions and to identify the noisiest driving behaviors.     

400 km/h速度下编组长度对高速列车隧道交会压力波的影响

基于三维非定常可压缩雷诺时均N-S方程与k-ε两方程湍流模型,采用滑移网格方法,对400 km/h速度等级下不同编组长度(3车编组,8车编组,16车编组)列车于各自最不利长度隧道的等速交会工况进行模拟.对比数值计算与动模型试验结果,两者同一测点压力峰峰值相差不超过3.6％,验证了数值计算的可靠性.研究结果表明:列车表面压力峰峰值由头车至尾车呈下降趋势;随着编组长度由3车增加到16车,列车表面最大压力峰峰值由12.05 kPa增加到15.18 kPa;隧道壁面最大压力峰峰值由14.73 kPa增加至19.19 kPa.     

New potential for multimodal connection: exploring the relationship between taxi and transit in New York City (NYC)

Transportation - Taxi trips have been somewhat neglected in transportation mobility and multimodal connection studies. The socio-demographic characteristics of taxi riders are often not fully...     

重载货车摩擦缓冲器阻抗特性的数值模拟

为预测摩擦缓冲器的实际工作状态,从几何特征和作用原理的角度,建立详细的MT-2型缓冲器理论模型。首先,通过对缓冲器内部各摩擦元件的运动学和静力学分析,推导出缓冲器在准静态下的阻抗特性;其次,引入附加摩擦系数量化各摩擦元件之间动静态摩擦过渡时的黏滞补偿,并模拟出缓冲器在动态下的阻抗特性;最后,利用C80型货车冲击试验数据对该缓冲器的理论模型进行验证。验证结果表明:总体上,数值模拟和现场试验下的缓冲器示功曲线基本吻合,说明模型的正确性;局部上数值模拟中缓冲器从加载Ⅰ阶段过渡至加载Ⅱ阶段的突变现象在冲击试验中表现的并不明显,还有待进一步完善。     

The Teachable Moments on Marine Mammal Tours: Watching versus Swim-With Tours

With the continuing growth of the tourism industry over recent decades, has come a change in tourist behavior from the traditional stereotypical 3-S tourist (sun, sand, sex) to an increasingly sophisticated and demanding tourist. These “new” tourists like to learn about history, nature, and wildlife, and they expect an educational component on wildlife tours. This study investigated swim-with-dolphin tours in Kaikoura, New Zealand with regard to the educational content and the overall anatomy of these tours, using data from observations on a total of 32 tours during December 2011. The resulting data were then compared with the data from Hrycik and Forestell's study, which investigated the content of questions asked by passengers on whale-watching tours in Stellwagen Bank National Marine Sanctuary. Results of the on-tour observations indicate that the surveyed tours display a structured approach to interpretation, which is customized to the specific tour anatomy of a “swim-with” tour, and varies in some parts significantly from “watch-only” tour interpretation.