In situ colonization of marine biofilms on UNS S32760 duplex stainless steel coupons in areas with different water qualities: Implications for corrosion potential behavior

In the presence of biofilms, stainless steels （SS） exhibits an increase in corrosion potential, called ennoblement. In the present study, the corrosion potential （Eco,） behavior of the duplex SS UNS S32760 was recorded simultaneously with the in situ marine biofilm formation in two areas at Arraial do Cabo, Southeastern Brazil. The biofilm at Forno Harbor （an anthropogenically disturbed area） was characterized by higher relative abundances of Bacteria at day 2, followed by diatoms （especially Navicula sp.） on day 10 and dinoflagellates on day 18, whereas no clear trend was recorded at Cabo Frio Island （an undisturbed area）. The ennoblement of Ecor values was site-dependent. In a complementary laboratory assay, biofilms were removed and the Eco values registered in sterile conditions for the subsequent 10 days and corroborated in situ results. Understanding biofilms and SS interactions has important implications for materials science and engineering decisions as well as helping to fill in imnortant gaps in this knowledge.     

填料性能对预应力锚拉式桩板墙影响的数值分析

预应力锚拉式桩板墙是一种得到广泛应用的新型支挡结构,本文通过建立耦合分析数值模型对桩板墙的受力特征进行了有限元分析。通过分析了解填料的力学参数(变形模量、摩擦角、粘聚力)对桩板墙位移、弯矩、土压力以及锚固端接触应力和自由段轴力的变化。揭示填料力学性能对预应力锚拉式桩板墙的影响,为类似工程的设计提供参考。     

TSP系统在隧道工程施工地质预报中的应用和发展

TSP是瑞士Amberg测量技术公司专门为隧道施工地质超前预报而设计的地震探测仪器。该系统从数据采集、处理和成果解释及评估高度智能化，其特点是：预报距离大（隧道掌子面前方至少150m），无须利用掌子面，对隧道施工妨碍小，易于操作和快速评估。通过TSP的探测，能够提前了解到掌子面前方围岩的地质情况，为施工及确定合理的支护参数提供依据，确保隧道施工安全和质量。介绍了TSP系统在隧道施工地质超前预报中的应用事例及其技术的发展。     

深埋长大公路隧道超前地质预报技术方法研究现状

将深埋长大公路隧道施工超前地质预报技术方法分为地质分析法、现场测试法、地球物理方法和数值模拟法等4大类,系统阐述了国内外公路隧道施工超前地质预报技术方法的研究现状,并提出了见解.     

TSP系统在隧道工程施工地质预报中的应用和发展

TSP是瑞士Amberg测量技术公司专门为隧道施工地质超前预报而设计的地震探测仪器.该系统从数据采集、处理和成果解释及评估高度智能化,其特点是:预报距离大(隧道掌子面前方至少150-m),无须利用掌子面,对隧道施工妨碍小,易于操作和快速评估.通过TSP的探测,能够提前了解到掌子面前方围岩的地质情况,为施工及确定合理的支护参数提供依据,确保隧道施工安全和质量.介绍了TSP系统在隧道施工地质超前预报中的应用事例及其技术的发展.     

汽车筒式液阻减振器技术的发展

分析了汽车乘坐舒适性／行驶平顺性和操作稳定性对筒式液阻减振器特性的要求，提出汽车在不同行驶工况减振器特性的要求是不的；分析了被动式减振器的发展历程及非充气和充气减振器的特点，阐述了机械控制式可调阻尼减振器，电子控制式减振器以及电流变和磁流变液体减器等的结构特点，工作原理及其动态特性；分析了筒式液阻减振器其于经验设计／实验修正开发方法的缺点，阐述了基于CAD／CAE技术的现代设计开发方法的过程及其关键问题，最后分析了我国筒式液阻减振器技术的发展状况及问题，展望了减振器技术的发展前景。     

Evaluation of forced flows on freeways with single‐loop detectors

This paper documents the development of a simple method for identifying and/or predicting freeway congestion using single loop detection systems. The proposed algorithm is simple and easy to incorporate into most freeway management systems. The Washington State Department of Transportation's Traffic Systems Management Center (TSMC) sponsored the original study. The investigation also led to a recommendation to replace the original TSMC definition of congestion or forced flow conditions with a more reliable indicator. Although, the TSMC has recently implemented a more advanced prediction system based on fuzzy set theory and neural networks to further identify patterns and rules for ramp metering strategies, the findings presented here continue to be constructive to freeway managers looking for quick and easy analyses that rely solely on single‐loop detection systems. The Seattle Area freeway study section used for the original study was the portion of mainline 1–5 northbound starting at the downtown Seattle Station 108 and ending at the Mountlake Terrace Station 193. Several days' worth of volume and lane‐occupancy data were collected for the afternoon time period from 2:30 p.m. to 6:30 p.m. Time intervals of 20 seconds were chosen for each data collection period. Important products of this research include the following:

• simple, and more reliable criterion for the definition of “bottleneck” or forced flow conditions than that originally used by the TSMC.
• simple, and reliable criterion for predicting impending “bottlenecks” or forced flow conditions.
• A proposed variable for improved selection of the appropriate metering rate. (Further analysis of the use of this variable for determining metering rates is recommended for future studies.

The proposed criteria are simple and easy to incorporate into current freeway management computer systems. Further investigation of freeway performance measurement using volume and occupancy data obtained from single‐loop systems is currently being performed.     

The stability of stochastic equilibrium in a two-link transportation network

Most research and applications of network equilibrium models are based on the assumption that traffic volumes on roadways are virtually certain to be at or near their equilibrium values if the equilibrium volumes exist and are unique. However, it has long been known that this assumption can be violated in deterministic models. This paper presents an investigation of the stability of stochastic equilibrium in a two-link network. The stability of deterministic equilibrium also is discussed briefly. Equilibrium is defined to be stable if it is unique and the link volumes converge over time to their equilibrium values regardless of the initial conditions. Three models of route choice decision-making over time are formulated, and the stability of equilibrium is investigated for each. It is shown that even when equilibrium is unique, link volumes may converge to their equilibrium values, oscillate about equilibrium perpetually, or converge to values that may be considerably different from the equilibrium ones, depending on the details of the route choice decision-making process. Moreover, even when convergence of link volumes to equilibrium is assured, the convergence may be too slow to justify the standard assumption that these volumes are usually at or near their equilibrium values. When link volumes converge to non-equilibrium values, the levels at which the volumes stabilize typically depend on the initial link volumes or perceptions of travel costs. Conditions sufficient to assure convergence to equilibrium in two of the three models of route choice decision-making are presented, and these conditions are interpreted in terms of the route choice decision-making process.     

城市交通能耗区的识别及等级划分方法研究

随着社会经济的发展，机动车保有量急剧增长，城市化过程中交通拥堵问题日趋严重，交通能源消耗加剧。为了降低由此带来的损失，需要及时探明路网中交通效率低、能耗高的区域，并采取有效的交通管理措施。通过研究交通状态与能耗的关系，进行相应的交通参数分析，建立能耗区识别及等级划分模型，计算得到3个等级能耗区的界定阈值分别为0．411和0．678。     

融合可持续理念的交通规划方案比选方法——以亚特兰大大都市区为例

越来越多的机构开始为交通系统的可持续发展定义,并试图将这一概念融入区域交通规划过程.然而,只有极少数的区域规划机构意识到了交通系统和土地利用变化给经济、环境和社会生活质量(这三者通常被认为是可持续交通系统的三个基本方面)带来的广泛影响.首先,论述了使用多个可持续发展指标的多准则决策方法,并应用其评估亚特兰大大都市区的三...