Reliability assessment of maintained ship hulls with correlated corroded elements

This paper reviews the factors that affect the corrosion rate of the ship hull girder. It is shown that corrosion rates vary as a function of the location of the element in the structure, of the ocean area and type of ballast tank and steel. However, the corrosion rate in elements that are subjected to similar conditions is highly correlated.

A time-variant formulation is proposed including the correlation between the corrosion rates in neighbouring elements in modelling the degrading effect that corrosion has on the reliability of ship hulls. The effect of corrosion is represented as a time-dependent decrease of plate thickness that affects the midship section modulus. One repair policy was considered and the example results show the effect of plate replacement when its thickness reaches 75% of the original value. The results also illustrate how the limit value of the thickness in the repair criteria influences the reliability and the decision about repair actions. This is also shown for the effect of different corrosion rates, inspection intervals, and allowable stresses.     

Optimum throughput and performance evaluation of marine terminals

The performance of marine terminals has generally been evaluated by comparing their actual throughputs with their optimum throughputs. The engineering approach that generally has been used to determine optimum throughputs may be appropriate when terminals have natural hinterlands. In a deregulated (competitive) environment in which the natural hinterlands of marine terminals have become diffused, the economic approach for determining optimum throughputs should be condiered. In such an environment, marine terminals are not only concerned with whether they can handle a given amount of cargo but also whether they can compete for such cargo.     

Assessment of the volume of fluid method for free-surface wave flow

This study was concerned with the free-surface wave flow around a surface-piercing foil. The volume of fluid method implemented in a Navier–Stokes computational fluid dynamics code was employed. Three widely used discretization schemes for the volume of fluid method were assessed for a test case that involved general ship waves, spilling breaking waves in front of the leading edge, and bubbly free surfaces in separated regions. A single computational approach was selected for the comparison, and a grid-dependence study was carried out. The computational results were validated against existing experimental data, showing good agreement. The validation results suggest that all three discretization schemes perform well, but the best and most efficient results were obtained using the high-resolution interface capturing scheme.     

A probabilistic damage tolerance concept for welded joints Part 2: a supplement to the rule based S–N approach

The first part of this paper presented the required statistics and stochastic models for reliability analysis of the fatigue fracture of welded plate joints. This present Part 2 suggests a probabilistic damage tolerance supplement to the design S–N curves for welded joints. The goal is to provide the practising engineer with simple tools that predict the reliability against fatigue fracture during service life. The impact of the chosen fatigue design factors (FDF) and the uncertainty in the applied stresses is revealed. The effect of an in-service inspection programme is also predicted. The results are presented as dimensionless matrices and suggested for use in support of decision-making at the design stage, without any advanced fracture mechanics modelling and stochastic simulation. One important advantage of this format is that the probability levels are presented regardless of actual weld class and target service life (TSL). This is obtained by introducing the FDF as a key parameter to the results. This parameter is defined as the ratio of predicted fatigue life over TSL. FDF is always calculated in the S–N approach which is mandatory in fatigue life prediction. Various welded details (classes) will have the same reliability level for the same FDF. This is true at the end of TSL and at earlier stages, i.e. fractions of TSL. The absolute value of TSL is immaterial for a given FDF. In the case of in-service inspection, the inspection interval is also given without dimensions as a fraction of TSL.

Only the influence of future scheduled inspections is treated. Updating based on actual inspection results is not included as the scope of work is inspection planning at the design stage. Results for some frequent cases occurring in practice are readily derived and presented.     

多层民用建筑的层间位移控制

阐述新抗震规范在地震作用和侧移控制方面的变化 分析影响结构侧向水平位移的各种因素,针对各种不同情况 提出实用的处理措施。     

160 km/h～200 km/h客车高性能合成闸片研究

概述了国内外树脂基合成摩擦材料和我国提速列车半金属合成闸片的现状,详细介绍了160km/h～200km/h客车高性能合成闸片的研制情况,并提出了制定160km/h～200km/h客车高性能合成闸片标准时应考虑的主要因素。     

Shipping control and the changing use of marine space

In this paper Professor Couper discusses the divisions of marine space as set out in the Revised Single Negotiating Text of UNCLOS III in relation to maritime accidents. This is followed by a contribution by Mr Burger on statistical material related to the incidence of marine accidents in North-West European waters. The third section of the paper by Captain S. Abdelgalil, is devoted to a technical discussion on traffic lanes in confined waters.     

Sea Cucumber Moratorium and Livelihood Diversity in Papua New Guinea

Livelihood diversity factors such as flexibility within fisheries, geographical mobility, reallocation of fishing effort into the broader economy, and the non-material benefits that fisheries provide are important areas of research in marine policy. We use two small-scale fisheries related socio-economic surveys of communities in the Tigak Islands of Papua New Guinea. The first conducted 5 years before a ban on the harvesting of sea cucumbers was imposed and the second from the present day, 5 years after the initiation of the ban—with the objectives of exploring changes in household fishing strategies (types and numbers of species targeted) and to identify any important socioeconomic factors that help explain those changes. Fishing's contribution to total household income has increased significantly (p = 0.019) up from 61% in 2004 to 73% in 2014 with the percentage of female residents living in a household now positively and significantly (p = 0.018) associated with fishing income. The average number of species categories targeted per household increased insignificantly while households with more women are significantly (p = 0.018) less likely to target more species than households with more men. Moreover, customary management practices contribute to this difference. Together, these results show that households are not worse off financially 5 years after the ban on sea cucumber harvesting and that gendered seascape use has implications for the role of livelihood diversity as a marine policy tool.     

基于GIS的机场道面管理系统

总结国内外建立机场道面管理系统的先进经验,根据机场道面管理和GIS的特点,构建了机场道面管理系统的基本结构和机场的分区管理模式,研究了建立机场道面的空间数据库和属性数据库的方法及其管理方法,介绍了系统关于GIS的主要功能。实践证明该方法符合实际．对建立基于GIS的机场道面管理系统是可行的。     

西班牙Velaro E高速列车的电气设备

西班牙铁路(RENFE)从2004年起将获得16组Velare E电动车组.这些电动车组是按欧洲铁路通用性规定设计的目前世界上最现代的高速列组.在最大坡道为25‰和海拔高1 200 m的线路上列车要以350 km/h高速运行,对其电气设备提出了很高要求.文章详细介绍了设计和实现这些电气系统及部件时必须重视和满足的要求.