港口供电系统改进

目前港口供电系统存在体积大、结构设置不合理和不适应环境等问题,经研究提出了减小体积、优化系统配置、提高箱变安全性和环境适应性等相应对策,在研究的基础上设计了一种新型箱式变电站,解决了目前港口供电系统存在的不足.     

Simulation of mixed gas formation for a spray-wall complex guided LPG direct injection engine

To obtain an ultralean air-fuel ratio and to reduce engine-out NOX and HC emissions induced by the richer mixture near the spark plug, a spray and wall complex guided combustion system has been developed by utilizing the fuel characteristics of LPG. The new combustion system configuration is optimized by using a commercial CFD code, FIRE V2013, and the reliability of the system has been experimentally demonstrated by Plane Laser-Induced Fluorescence (PLIF). The mixture formation in the new combustion system under part load (2,000 rpm) is numerically simulated. With an injection timing of 40°CA BTDC, the LPG spray which is injected from two upper holes, reaches the ignition point, and the other part of the LPG spray which is injected from the bottom hole, is directed to the ignition point through the vertical vortices at the same time. At the ignition timing of about 20°CA BTDC, the two-part mixtures have been shown to form a stable and richer stratified mixture around the ignition point, and the maximum global air-fuel ratio reaches to 60: 1.     

The Kalker book of tables for non-Hertzian contact of wheel and rail

A new regularisation of non-elliptical contact patches has been introduced, which enables building the look-up table called by us the Kalker book of tables for non-Hertzian contact (KBTNH), which is a fast creep force generator that can be used by multibody dynamics system simulation programs. The non-elliptical contact patch is regularised by a simple double-elliptical contact region (SDEC). The SDEC region is especially suitable for regularisation of contact patches obtained with approximate non-Hertzian methods for solving the normal contact problem of wheel and rail. The new regularisation is suitable for wheels and rails with any profiles, including worn profiles.

The paper describes the new procedure of regularisation of the non-elliptical contact patch, the structure of the Kalker book of tables, and parameterisation of the independent variables of the tables and creep forces.

A moderate volume Kalker book of tables for SDEC region suitable for simulation of modern running gears has been computed in co-simulation of Matlab and program CONTACT.

To access the creep forces of the Kalker book of tables, the linear interpolation has been applied.

The creep forces obtained from KBTNH have been compared to those obtained by program CONTACT and FASTSIM algorithm. FASTSIM has been applied on both the contact ellipse and the SDEC contact patch. The comparison shows that KBTNH is in good agreement with CONTACT for a wide range of creepage condition and shapes of the contact patch, whereas the use of FASTSIM on the elliptical patch and SDEC may lead to significant deviations from the reference CONTACT solutions.

The computational cost of calling creep forces from KBTNH has been estimated by comparing CPU time of FASTSIM and KBTNH. The KBTNH is 7.8–51 times faster than FASTSIM working on 36–256 discretisation elements, respectively.

In the example of application, the KBTNH has been applied for curving simulations and results compared with those obtained with the creep force generator employing the elliptical regularisation. The results significantly differ, especially in predicted creepages, because the elliptical regularisation neglects generation of the longitudinal creep force by spin creepage.     

小型直喷式柴油机燃用生物质能燃料的性能研究

文章主要研究了生物质能混合燃料在柴油机上的应用,通过在一台小型直喷式柴油机上进行不同组分柴油-生物柴油-乙醇混合燃料的燃烧、油耗和排放性能对比试验,分析了乙醇含量的改变对混合燃料的发动机燃烧压力、滞燃期、放热规律、比油耗和排放的影响．     

高速公路景观设计初探

就高速公路景观设计进行了探讨.     

高等级公路沥青路面平整度的控制

结合几年来的公路施工经验,根据影响路面平整度主要因素,分析设备及施工工艺方面应注意的主要事项,以提高高速公路路面的平整度.     

体外大鼠成骨细胞对破骨细胞形成的影响

目的通过将鼠成骨细胞与破骨细胞直接共培养的实验方法,研究成骨细胞对破骨细胞分化及功能成熟的影响。方法按照M-CSF 30μg/L、RANKL 50μg/L的浓度对鼠骨髓单个核细胞诱导培养6 d,与原代培养3 d的鼠成骨细胞按细胞数量1∶1直接共培养,加入1,25-(OH)2D31×10-8mol/L和PGE21×10-6mol/L,利用形态学观察、TRAP染色、骨吸收陷窝检测等方法对共培养细胞进行鉴定。结果成骨细胞与破骨细胞共培养时,成骨细胞有明显的生长优势;染色后显微镜下可见大量呈单层排列的成骨细胞,偶见TRAP( )的破骨细胞。结论成骨细胞对破骨细胞分化及功能成熟的影响与两者的相对数量有关。本实验中,由于成骨细胞快速生长,当其数量多于破骨细胞时,可能使1,25-(OH)2D3对成骨细胞RANKL表达的上调作用不足,且PGE2对成骨细胞OPG表达的下调作用不足,从而主要表现为对破骨细胞形成及分化的抑制作用。     

彩色多普勒超声在动态监测移植肝及其并发症中的应用

目的探讨彩色多普勒超声在动态监测肝移植术后血流动力学变化及并发症诊治中的应用价值。方法回顾我中心107例原位肝移植术后应用彩色多普勒超声资料,汇总后行统计学分析。结果肝移植术后早期门脉流速较正常对照组升高,而肝动脉流速降低,后逐渐恢复正常。107例中发现肝动脉血栓形成2例(1.87%),肝动脉狭窄5例(4.67%),门脉血栓形成3例(2.80%),肿瘤复发7例(6.54%),诊断为急性排斥反应18例次(16.82%),慢性排斥反应10例次(9.34%),胸腔积液105例(98.13%),腹腔积液65例(60.74%),假性动脉瘤1例,胰漏1例,胆道感染4例(3.74%),胆道狭窄4例(3.74%),胆漏5例(4.67%),胆总管结石1例。结论彩色多普勒超声在动态监测肝移植术后血流动力学变化及并发症诊治中具有重要的临床意义。     

Role of candesartan against cerebral ischemia and oxidative damage in normotensive rats

Objective Angiotensin Ⅱ (Ang Ⅱ ) contributes to modulating blood pressure by stimulation of Ang Ⅱ AT1 receptors. We devised a rat transient middle cerebral artery occlusion (MCAO) model to assess whether oxidative damage is decreased after pretreatment with Angiotensin Ⅱ AT1 receptor blocker (ARB). Methods After 2 weeks pretreatment with ARB 0. 5 and 1 mg/kg, the male Wister rats were subjected to 2 h middle cerebral artery occlusion (MCAO). At 24 h, the lumen diameter of middle cerebral artery, the plasma level of 8-hydroxy-2'-deoxyguanosine (8-OHdG), and HIF-1 a levels were recorded and compared. Results After pretrcatment with ARB 0.5 and 1 mg/kg, blood pressure did not significantly change compared with that of controls. In the group of candesartan at 1 mg/(kg· day), the lumen diameter was significantly increased compared to that in control group [(86.0±5.0) μm vs. (69.0± 2.1) μm; P<0. 01, n = 6- 8]. The plasma 8-OHdG levels of ARB pretreatment groups were decreased. In immunohistochemical findings, 8-OHdG- and HIF-1α-containing cells in ARB pretreatment groups were decreased. Conclusion Brain ischemia and oxidative damage can be reversed by AT1 receptor blockade in normotensive rats after transient cerebral artery occlusion.