公路三级自然区划新框架体系的应用研究

从分析以往的公路三级自然区划的研究原理和思路出发,总结、归纳、探讨性地提出公路三级自然区划新的框架体系:原则,标志性体系的建立,方法的选用以及基于新方法GIS技术的应用。新框架体系的应用研究为以后的相关人员进行公路三级自然区划提供参考和依据。     

基于视觉识别的线控制动压力滑模控制

制动安全是车辆主动安全的关键技术之一.制动决策和执行器控制是影响线控制动系统性能的两个主要因素.路面自适应性和控制器鲁棒性分别对制动决策和执行器控制有着重要影响,制约着线控制动系统的发展.本文中以一种液压调控的线控制动系统为基础,针对路面自适应性和控制器鲁棒性问题,提出一种双层结构的制动系统控制器,上层采用计算机视觉的...     

Virtual prototype simulation on underwater hydraulic impingement shovel

The virtual prototype technology is applied to the design of the hydraulic impingement shovel, which is to increase the reliability of the design. The work principle of hydraulic impingement shovel is expatiated, and its dynamic equations are established. The 3D model of virtual prototype is built by PRO/E. Then the couple between the mechanical body of prototype and the hydraulic system is completed by virtue of ADAMS. Finally, the simulation is made on the virtual prototype. The simulation results show that the design of underwater hydraulic impingement shovel is rational. The virtual prototype technology could lay sound foundation of successful manufacturing of physical prototype for the first time and offer highly effective and feasible means for the design and production of underwater equipments.     

Experimental study on the width of the turbulent area around bridge pier

At present, the method of calculating the turbulent flow width around the bridge pier is not given in the "Standard for Inland River Navigation" (GB50139-2004) in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouring around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred.     

基于数值模拟的钛合金锯齿状切屑研究

切削加工中切屑成形是一种典型的大变形问题,它涉及到材料非线性、几何非线性以及边界非线性等问题。本文利用DEFORM-2D对钛合金(Ti6Al4V)进行了锯齿状切屑形成过程的有限元模拟,分析了切削过程中的应力场、应变场及温度场,探讨了锯齿状切屑的形成机理,获得了切削参数对锯齿状切屑形态的影响规律,为优化切削参数、提高刀具寿命提供了参考。     

5SH24AC副机不能启动与发火的浅析

由于修理和管理上的疏漏,造成副机不能正常启动和发火。因此,把好修理质量关,加强内部管理,才能杜绝此类事故的再次发生。     

设备拥有量模型的研究

通过对设备完好率、设备出勤台数和设备拥有量三者之间的关系进行深入的分析,找出三者之间的单值对应关系,采用线性回归、最优化理论、曲面拟合等数学方法并结合计算机软件建立设备拥有量的计算模型,并对此模型进行更深入的分析,建立其分段模型,从而保证了模型的计算精度,为企业的设备投资提供科学的准确的定量分析依据。     

18000吨半潜船轮机部分设计简介

本文简单介绍了半潜船的几个特殊的系统,如电力推进系统、动力定位系统,压缩空气排压载系统等。     

计算机集散控制系统在黄石港的应用

在介绍黄石港二、三号码头系统的基础上,提出了一种适用于散货码头的三级分布式集散控制系统体系结构,同时还介绍了系统的软件设计及实现、简易实用的联络和监视系统。系统的实际运行验证了设计的正确性。     

中国第四方物流运作模式初探

1第四方物流概念的提出 　　当国内还在对第三方物流讨论得如火如荼的时候,国外已经出现了“第四方物流“(4PL)的概念并进行了相关的运作.这个概念是著名的管理咨询公司安盛公司首先提出的,并且作为该公司专有的服务商标进行了注册. 　　……