摆式列车受电弓垂向振动主动控制

建立了摆式列车机电耦合动力学模型、受电弓线性和非线性动力学模型及接触网有限元模型和静态接触刚度模型,组成摆式列车-受电弓-接触网耦合动力学模型,分别设计了P和H∞鲁棒控制器,应用数值仿真方法,研究了摆式列车直线和曲线通过时两种控制器对摆式列车受电弓垂向主动控制的效果。结果表明受电弓若无垂向控制,其弓网接触压力波动较大;P和H∞鲁棒控制均能减小弓网接触压力的波动;控制延时对P控制比对H∞鲁棒控制的影响大;是否考虑接触网的振动对接触压力影响较大,对控制效果影响不大。这说明摆式列车受电弓垂向主动控制能明显改善弓网接触压力波动;H∞鲁棒控制比P控制效果更好;接触网的静态接触刚度模型可用于受电弓主动控制的定性分析。     

Structural Optimization and Strength Analysis of the Lifting Arm of a Wet Shotcrete Spraying Unit北大核心CSCD

Wet shotcrete spraying units are widely used in underground engineering, for railways, highways, water conservancy and hydropower stations, municipal works, mining and military and other industries. Structural analysis and mechanical behavior optimization are conducted regarding the lifting arm of a TKJ series shotcrete spraying unit, and optimization of the hinge point position and working scope of the lifting arm is realized. The optimal layout scheme for the hinge force is given based on the Monte Carlo method, the hinge force of the lifting arm is improved for the mean and maximum values, and the maximum and average hinge force of the lifting cylinder decrease by 23.14% and 7.70%, respectively, compared with that of the original scheme. The static strength is checked using Ansys-Workbench for the optimized scheme, and the results show that the optimized scheme has a larger safety re-serve and that the structural design is more reasonable than the original scheme. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

A Study of Prevention Techniques for Tunnel Lining Defects北大核心CSCD

Defects of tunnel lining, such as inadequate thickness, voids, cracks, rock falling and water leakage etc., endanger the safety of railway tunnel operation. Based on the site construction, an analysis of the reasons for lining defects was conducted; technical measures against lining defects were proposed and tests were carried out at site. The results show that these measures are reliable and effective, and the purposes of prevention and treatment are re⁃ alized. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

舰船中压直流综合电力推进系统稳态分析研究

本文对舰船中压直流综合电力推进系统进行稳态分析。首先,根据舰船中压直流综合电力系统基本特点,选定直流分层前推回代法作为基本方法加以改进;同时,提出了适用于该方法的支路计算等效模型,并将上述思想进行程序实现。通过算例分析结果可知,论文所提出的基于直流分层前推回代法的潮流计算方法,能够适用于舰船中压直流综合电力推进系统。     

武器装备重载运输车辆状态监测系统设计与实现

本文针对大型武器重载运输车辆存在的信息化程度不高,测试性、维修性、保障性设计不足等问题,对某型车辆进行了加改装,建立了开放式通用化状态感知和采集体系结构,安装智能传感器、健康信息处理平台、接口适配设备、信息监测处理设备等实现对车辆底盘、电站、电子设备和液压系统等关重件的综合健康状态信息采集和监测。本系统可以为各级指挥人员提供即时装备健康状态信息,有利地支持装备精确维修和远程支援。     

Modeling the interactions between car and bicycle in heterogeneous traffic

In this paper, a new cellular automata model is proposed to simulate the car and bicycle heterogeneous traffic on urban road. To capture the complex interactions between these two types of vehicles, a novel occupancy rule is adopted in the proposed model to consider the variable lateral distances of mixed vehicular traffic. Based on massive simulations, microscopic fundamental diagrams under different bicycle densities are devised. With these, the bicycle's spilling behavior is then investigated and discussed. In order to reflect the interference of a bicycle on a car, the interference transformation from friction state to block state is modeled explicitly. Finally, different simulation results under different occupancy rules indicate that the constant and fixed occupancy rule adopted in the previous studies might lead to overestimation of car flux in the heterogeneous traffic flows with different bicycle densities. Copyright © 2013 John Wiley & Sons, Ltd.     

“工厂法”沉管隧道早期性能的足尺试验研究

由于沉管隧道管段体积大、结构形式复杂、施工工艺复杂,容易因温度、收缩以及约束等原因,造成管段结构在预制阶段出现危害性裂缝,进而影响结构的服役性能和耐久性能。文章依托在建港珠澳大桥沉管隧道工程实例,开展了足尺试验,对"工厂法"沉管管节关键部位的温度和应变发展实施了监测,分析对比了温度发展规律和应变发展规律。分析结果表明:在早期因混凝土水化热引起温度上升,整个管段结构膨胀受拉,温度到达峰值后逐渐下降,结构也收缩恢复;但由于混凝土自收缩等因素的存在,结构最终收缩受压。研究所提供的试验结果可作为深入进行数值分析的一个基础。     

集中排烟隧道近火源顶板热参数理论预测

由于集中排烟模式能较好地控制上下游烟气的扩散范围,故被广泛应用于长大隧道设计中。文章针对小尺度火灾,建立了集中排烟隧道火源热烟羽受限发展理论模型,与已有火灾实验结果进行对比,完成了理论模型的验证,预测了顶板下方最高烟气温升、偏移距离等热参数。预测结果表明:火灾强度一定时,烟气最大温升随等效风速增加而急剧下降,且火灾强度对烟气温升的影响也较为显著;当等效风速超过1.5 m/s时,最大温升变化趋缓直至恒定;等效风速较小时,羽流未发生明显偏移,随着等效风速进一步增大,偏移距离明显增大,其变化速率随火灾强度的增大而减小。经回归整理得到了顶板下方烟气最大温升、偏移距离的无量纲准则关联式。     

静态爆破法在深圳地铁施工中的应用

静态爆破是近年来发展起来的一种新型爆破施工技术,它可在无震动、无飞石,无噪音、无污染的条件下破碎或切割岩石或混凝土构筑物。深圳地铁2号线东延线土建工程安托山站—侨香站区间矿山法施工竖井系选用此工法在2 500 mm×3 000 mm雨水箱涵附近成功地进行了中、微风化花岗岩开挖施工,确保了雨水箱涵的安全性。     

富水砂层中暗挖隧道施工沉降控制技术

富水砂层中暗挖隧道施工是地铁施工中的一大难点,常常因沉降过大而引发安全事故。在深圳地铁安-侨区间隧道工程中,通过洞内帷幕注浆、水平旋喷桩、地表井点降水等辅助措施做到了超前控制,在解决隧道开挖安全问题的同时有效地减少了沉降量;施工过程中严格执行了"管超前、短进尺、强支护、早封闭、勤量测"的方针,控制了时空效应,解决了富水砂层中暗挖隧道沉降过大的问题。文章重点分析了沉降原因及控制沉降的关键技术和有效措施。