矩形槽道采用不同冷却介质的传热与阻力特性分析(英文)

Several industrial applications such as electronic devices,heat exchangers,gas turbine blades,etc.need cooling processes.The internal cooling technique is proper for some applications.In the present work,computational simulations were made using ANSYS CFX to predict the improvements of internal heat transfer in the rectangular ribbed channel using different coolants.Several coolants such as air,steam,air/mist and steam/mist were investigated.The shear stress transport model(SST)is selected by comparing the standard k-ωand Omega Reynolds Stress(ωRS)turbulence models with experimental results.The results indicate that the heat transfer coefficients are enhanced in the ribbed channel while injecting small amounts of mist.The heat transfer coefficients of air/mist,steam and steam/mist increase by 12.5%,49.5%and 107%over that of air,respectively.Furthermore,in comparison to air,the air/mist heat transfer coefficient enhances by about 1.05 to 1.14 times when the mist mass fraction increases from 2%to 8%,respectively.The steam/mist heat transfer coefficient increases by about 1.12 to 1.27 times higher than that of steam over the considered range of mist mass fraction.     

Biogeography-based combinatorial strategy for efficient autonomous underwater vehicle motion planning and task-time management

Autonomous Underwater Vehicles (AUVs) are capable of spending long periods of time for carrying out various underwater missions and marine tasks. In this paper, a novel conflict-free motion planning framework is introduced to enhance underwater vehicle’s mission performance by completing maximum number of highest priority tasks in a limited time through a large scale waypoint cluttered operating field, and ensuring safe deployment during the mission. The proposed combinatorial route-path planner model takes the advantages of the Biogeography-Based Optimization (BBO) algorithm toward satisfying objectives of both higher-lower level motion planners and guarantees maximization of the mission productivity for a single vehicle operation. The performance of the model is investigated under different scenarios including the particular cost constraints in time-varying operating fields. To show the reliability of the proposed model, performance of each motion planner assessed separately and then statistical analysis is undertaken to evaluate the total performance of the entire model. The simulation results indicate the stability of the contributed model and its feasible application for real experiments.     

自主水下航行器发展概述

自主水下航行器（AUVs）因其应用于海洋勘探而逐渐成为一个有趣的研究对象。波浪滑翔机是一种行驶于波浪表面的无人滑行器（SUV）,它借助海洋能来推动自己,这对于典型的AUVs所采用的电机供能以及昂贵的锚链系统浮标供
　　能来说,是一种技术上的重大跨越。该文讨论了最有效率的AUVs类型。第一部分为每一种类型的发展历程,第二部分为它们各自的技术特点。此外,波浪滑翔机作为应用于海洋部门的一种新型水下机器人,文中简要地给出它的过去,现在以及未来的发展概述。研究波浪滑翔机的意义在于证明它的效率以及实用性,进而取代诸多的AUVs来实现各种实际应用。而研究结果也表明波浪滑翔机确实可以应用于众多领域。对于海洋检测而言,相比于其他AUVs,波浪滑翔机提供了更廉价,更经济,更环保的作业模式,同时也不需要缆绳、船舶等海上作业服务。     

内置式永磁同步电动机无传感器速度控制和转子初始位置估计方法的应用及实验研究

针对内置式永磁同步电动机传动提出了一种新的无速度传感器控制和转子初始位置估计方法.在内置式永磁同步电动机旋转过程中,采用扩展卡尔曼滤波方法,仅需测量电机定子的电压和电流,便可得到转速和转子位置的估计值.对内置式永磁同步电动机,采用扩展卡尔曼滤波方法的主要困难在于在静止坐标系中其动态模型的复杂性.由于磁路的不对称性,在静止坐标系中建内置式永磁同步电动机的模型比建表面式永磁同步电动机模型更复杂.在无传感器的传动系统中,电机的起动过程是一个问题,因为在起动之前没有任何信息可以获得.转子初始位置估计是在电机静止时,在瞬间对定子绕组施加合适的电压脉冲序列,通过测量峰值电流获得转子位置信息.利用磁饱和效应对凸极性的影响来区分南北磁极.给出基于浮点数字信号处理器TMS320C31平台得到的内置式永磁同步电动机实验结果.     

Combustion development of a Bi-Fuel engine

Environmental improvement and energy issues are increasingly becoming more important as worldwide concerns. Natural gas is a good alternative fuel that can help to improve these issues because of its large quantity and clean burning characteristics. This paper provides the experimental performance results of a Bi-Fuel engine that uses Compressed Natural Gas as its Primary fuel and gasoline as its secondary fuel. This engine is a modification of the basic 1.4-liter gasoline engine. Generally, on the unmodified base engine, torque and power for CNG fuel are considerably lower than gasoline fuel. In this paper, the influence of fuels on wall temperature, performance and emissions are investigated.     

New approach for performing failure analysis of fuel cell-powered vehicles

Safety of hybrid-electric and fuel cell vehicles is a critical aspect of these new technologies, since any accident exposing occupants of such vehicles to unconventional hazards may result in significant setbacks to successful market penetration. Fuel cell and hybrid-electric drive systems are complex, and it is essential to perform a thorough analysis to determine critical failure conditions. There are several safety concerns for routine operation of such systems, particularly for hydrogen-fueled vehicles. A modified Failure Modes and Effect Analysis (FMEA) has been developed, along with a Criticality Analysis (CrA), to identify potentially hazardous conditions for crash and non-crash situations. A mathematical model of fuel cell operation has been developed and used here in conjunction with the FMEA. Component failures during the event modes are simulated using vehicle models developed with Matlab Simulink tools. Six simulation models were created using the software. In addition, a preliminary finite element model of a fuel cell vehicle, using a Ford Taurus (91′) model year sedan, has been developed and implemented. This finite element model is used as a demonstration of the crash simulation of the vehicle.     

Sampling of alternatives for route choice modeling

This paper presents a new paradigm for choice set generation in the context of route choice model estimation. We assume that the choice sets contain all paths connecting each origin–destination pair. Although this is behaviorally questionable, we make this assumption in order to avoid bias in the econometric model. These sets are in general impossible to generate explicitly. Therefore, we propose an importance sampling approach to generate subsets of paths suitable for model estimation. Using only a subset of alternatives requires the path utilities to be corrected according to the sampling protocol in order to obtain unbiased parameter estimates. We derive such a sampling correction for the proposed algorithm.Estimating models based on samples of alternatives is straightforward for some types of models, in particular the multinomial logit (MNL) model. In order to apply MNL for route choice, the utilities should also be corrected to account for the correlation using, for instance, a path size (PS) formulation. We argue that the PS attribute should be computed based on the full choice set. Again, this is not feasible in general, and we propose a new version of the PS attribute derived from the sampling protocol, called Expanded PS.Numerical results based on synthetic data show that models including a sampling correction are remarkably better than the ones that do not. Moreover, the Expanded PS shows good results and outperforms models with the original PS formulation.     

Measuring the potential for automobile fuel savings in the US: The impact of obesity

High rates of oil consumption and obesity in the US have become important socioeconomic concerns. While these concerns may seem unrelated at first, growing obesity rates in the US increase fuel consumption by adding passenger weight to vehicles. This paper estimates the additional amount of fuel (i.e., gasoline) consumed annually by noncommercial passenger highway vehicles in the US due to passenger overweight and obesity. The mathematical model presented in this paper estimates that as many as one billion additional gallons of gasoline are consumed each year due to overweight and obesity in the US, accounting for up to 0.8% of the fuel consumed by these vehicles annually. This additional fuel consumption causes carbon dioxide emissions of up to 20 billion pounds or more, accounting for up to 0.5% of the annual carbon dioxide emissions in the transportation sector.     

Development of models for predicting roadside nitrogen dioxide concentrations and their evaluation against datasets measured in Dublin,Ireland

Different methods for predicting levels of roadside NO₂ from NO_x concentrations have been proposed. Prior work suggests that either a linear or a logarithmic relationship exists among the roadside NO₂ and NO_x concentrations. We modify and compare those methods with new formulations based on the principles of the original methods for datasets pertaining to Dublin. A new relationship based on the power law is developed to better model the decay of the ratio of (NO₂/NO_x)_road ratio with increasing NO_x concentration. These formulations are compared and examined at two study sites: at an intermittently congested urban street canyon and a free-flowing motorway.