Open-type ferry safety system design for using LNG fuel

In this feasibility study, we investigate the viability of using Liquefied Natural Gas (LNG) fuel in an open type Ro-Ro passenger ferry and the associated potential challenges with regard to the vessel safety systems. We recommend an appropriate methodology for converting existing ships to run on LNG fuel, discuss all the necessary modifications to the ship’s safety systems, and also evaluate the relevant ship evacuation procedures. We outline the basic requirements with which the ship already complies for each safety system and analyze the additional restrictions that must be taken into consideration for the use of LNG fuel. Appropriate actions are recommended. Furthermore, we carry out a hazard identification study. Overall, we clearly demonstrate the technical feasibility of the investigated scenario. Minimal modifications to the ship’s safety systems are required to comply with existing safety rules for this specific type of ship.     

Changes in the shelf macrobenthic community over large temporal and spatial scales in the Bohai Sea, China

Over the past 20 years, the Bohai Sea has been subjected to a considerable human impact through over-fishing and pollution. Together with the influence of the Yellow River cut-off, the ecosystem experienced a dramatic change. In order to integrate available information to detect any change in macrobenthic community structure and diversity over space and time, data collected during the 1980s and the 1990s from 3 regions of the Bohai Sea (Laizhou Bay, 16 stations, 37–38°N, 119–120.5°E; central Bohai Sea, 25 stations, 38–39°N, 119–121°E; eastern Bohai Bay, 12 stations, 38–39°N, 118.5–119°E) were reanalyzed in a comparative way by means of a variety of statistical techniques. A considerable change in community structure between the 1980s and the 1990s and over the geographical regions at both the species and family level were revealed. After 10 years, there was a considerable increase in abundance of small polychaetes, bivalves and crustaceans but decreased number of echinoderms. Once abundant in Laizhou Bay in the 1980s, a large echinoderm Echinocardium cordatum and a small mussel Musculista senhousia almost disappeared from the surveying area in the 1990s. Coupled with the increased abundance was the increased species richness in general whereas evenness was getting lower in central Bohai Sea and Bohai Bay but increased in Laizhou Bay. K-dominance plot showed the same trend as evenness J′. After 10 years, the macrobenthic diversity in the Bohai Sea as a whole was slightly reduced and a diversity ranking of central Bohai Sea > Laizhou Bay > eastern Bohai Bay over space was also suggested. Sediment granulometry and organic content were the two major agents behind the observed changes.     

Market-based measures for greenhouse gas emissions from ships: a review

The purpose of this paper is to review several distinct proposals for market-based measures (MBMs) that are under consideration by the International Maritime Organization (IMO) for greenhouse gases (GHGs). Thus far, some ten distinct MBM proposals have been submitted to the IMO. The paper discusses the general concept of an MBM, the mechanisms used by MBMs, and attempts to discuss the pros and cons of the submitted proposals, according to some specific criteria.     

Hydrography and biogeochemistry of the north western Bay of Bengal and the north eastern Arabian Sea during winter monsoon

The north eastern Arabian Sea and the north western Bay of Bengal within the Indian exclusive economic zone were explored for their environmental characteristics during the winter monsoons of 2000 and 2001 respectively. The two regions were found to respond paradoxically to comparable intensities of the atmospheric forcing. There is an asymmetry in the net heat exchange of these two basins with atmosphere because of the varying thickness of barrier layer. During winter, the convective mixing in the Arabian Sea is driven by net heat loss from the ocean, whereas the Bay of Bengal does not contribute to such large heat loss to the atmosphere. It appears that the subduction of high saline Arabian Sea water mass is the mechanism behind the formation of a barrier layer in the northeast Arabian Sea; whereas that in the Bay of Bengal and the southeast Arabian Sea are already established as due to low saline water mass. The weak barrier layer in the Arabian Sea yields to the predominance of convective mixing to bring in nitrate-rich waters from the deeper layers to the surface, thereby supporting enhanced biological production. On the other hand, the river discharge into the Bay of Bengal during this period results in the formation of a thick and stable barrier layer, which insulates vertical mixing and provide oligotrophic condition in the Bay.     

Climate–ocean variability and Pacific hake: A geostatistical modeling approach

Climate forcing of the California Current has been known to impact the distribution and abundance of a number of local fish populations, but the mechanisms involved remain poorly understood. Climate metrics such as the Pacific Decadal Oscillation (PDO) and the El Niño Southern Oscillation (ENSO) are usually used to represent climate processes and direct links are made between climate forcing and production variability. This involves aggregation of impacts across large spatial scales and range of species. However, fluctuations in productivity are often the result of changes in physical habitat. In order to fully understand the relationship between climate and productivity, habitat changes should be addressed. In this study we use a geostatistical approach to quantify adult Pacific hake habitat during different climate regimes. Several authors have suggested that the distribution and intensity of the sub-surface poleward flow (the undercurrent) plays a key role in defining adult hake habitat along the west coast of North America. Here we build a model designed to predict hake habitat distribution in space based on sub-surface poleward flow distribution and bottom depth. Our results show that hake habitat expands in 1998 El Niño year compared to 1995. Given the important predatory role that hake plays in the CC, the amount and distribution of adult hake habitat has large implications for the Pacific Northwest food web and could thus serve as an ecosystem indicator representing important physical–biological interactions. Spatially based ecosystem indicators such as the one we develop here address two important yet neglected areas in the ‘Ecosystem Indicators debate’: the importance of developing metrics explicitly representing spatial and environmental processes shaping ecosystem structure. Without these, our power to fully describe ecosystems will be limited.     

BFRP加固损伤混凝土梁挠度计算方法

为了准确计算玄武岩纤维增强复合材料(BFRP) 加固损伤混凝土梁的挠度, 为BFRP加固损伤混凝土梁的设计与施工提供理论依据, 按照配筋率不同设计了11片试验梁进行试验, 每组试验梁设置不同的BFRP布加固量与加载方法。计算了各试验梁的荷载-挠度曲线, 分析了未加固梁、1层BFRP布加固梁、2层BFRP布加固梁在不同初始荷载下的挠度变化规律。给出了BFRP加固损伤混凝土梁跨中挠度的计算公式, 对比了挠度计算值与实测值。分析结果表明: BFRP加固混凝土梁的挠度受初始荷载和加固量的影响, 有初始荷载的加固梁挠度较无初始荷载的加固梁挠度增大30%~4%, 2层BFRP布加固梁的挠度较1层加固梁的挠度增大19%~2%, 计算挠度时需考虑BFRP布滞后应变的影响; 挠度计算值与实测值的最大差值平均为7.26 mm, 初始荷载小与配筋率高的试验梁挠度计算值与实测值较为接近, 可以用于实际工程计算。     

Loosening analysis for fastening screw of automotive door trim parts

While a screw is a fastening element that can tighten the two parts at low cost, the loosening of the screw is generated due to external forces such as repetitive load, vibration, and thermal stress. This phenomenon decreases the initial clamping force, and this can be a serious problem to the safety of the product. However, while fastening parts are handled through experiment and experience, there is a lack of research on the screw loosening of plastic fastening parts. For example, vehicles have various fastening parts. Among the fastening elements, screws are typically used for tightening parts of the vehicle door trim. Vehicle interior materials are mainly composed of plastic parts. Especially, the temperature of the vehicle interior changes from a sub-zero temperature to 100 degrees (°C) due to solar radiation. Unlike metals, plastic materials are commonly susceptible to the environment. In this study, the fastening screw of automotive door trim parts is selected. First, a screw loosening mechanism is implemented through Computer Aided Engineering (CAE) analysis and the influences of degradation are then analyzed. Secondly, the selecting method of clamping force is suggested through the analysis result of reduction according to the tightening torque.     

Hybrid three-dimensional mesh generation from quad-dominant surface meshes

A hybrid mesh generation algorithm using a modified plastering method for three-dimensional objects with variable thickness is presented. The method starts with a quad-dominant surface mesh and generates layered elements with variable thickness by using adaptive offsetting, resulting in hex-tet dominant mesh generation. Hexahedral and prismatic meshes are generated by the inward offsetting of the initial boundary mesh. In order to generate a conforming mesh, pyramid elements are constructed on top of hexahedral elements, and tetrahedral elements are generated for the remaining domain by using an advancing front method. This method is applied to several different geometries, and the effectiveness of the proposed algorithm is demonstrated.     

Experimental investigation of abrasive flow machining effects on injector nozzle geometries,engine performance,and emissions in a di diesel engine

The effects of the Abrasive Flow Machining (AFM) process on a direct injection (DI) Diesel engine fuel injector nozzle are studied. Geometry characterization techniques were developed to measure the microscopic variations inside the nozzle before and after the process. This paper also provides empirically-based correlations of the nozzle geometry changes due to the AFM process. The resulting impact of the process on the engine performance and emissions are also assessed with a DI Diesel engine test setup. This study shows that properly AFM-processed injectors can enhance engine performance and improve emissions due to the improved quality of the nozzle characteristics. However, an extended process can also cause enlargement of the nozzle hole as a side effect, which can adversely affect emissions. Emission measurements show the trade-off for the minimum levels as the process proceeds. Since the enlargement of the hole during the AFM process is not avoidable and must be minimized, strict control over the process is required. This control can be enforced by either limiting the AFM processing period, or by properly preparing the initial hole diameter so as to accommodate the inevitable changes in the nozzle geometry.