考虑科氏力影响的旋转Timoshenko梁的变结构控制分析

文章基于Hamilton变分原理,采用Timoshenko梁理论,给出了考虑科氏力影响的中心刚体一柔性梁系统的动力学方程,并应用弹性波与振动模态理论,确定了受科氏力影响的Timoshenko梁的振动模态。同时,结合变结构控制器设计原理,对比分析了考虑科氏力与不考虑科氏力时对旋转Timoshenko梁振动的影响。     

Refrigeration Performance Analysis and Its Applicability of a New Metal Hydride Couple in Auto Air-conditioning

With COP and dynamic characteristics in refrigeration cycle as criteria,a new metal hydride couple--LaNi4.61Mn0.26Al0. 13/La0.6Y0.4Ni4.8Mn0.2 was selected by establishing calculation procedure and metal hydride selection model. The experimental results show that the refigeration cycle of the selected couple is good in the performance. The recovered waste heat and refrigeration power from exhaust gas of several kinds of automobile are calculated by waste-heat formula ,coefficient RQ and COP. Refrigeration cycle of the new couple can satisfy the air-conditioning requirement of truck and car and is not enough in passenger car,according to the respective cooling load.     

城乡河网清漂设备发展

研究城乡河网漂浮物的组成,分析了它的产生给人类生活及环境所带来的危害,突出了清漂的必要性,详细介绍了目前我国的清漂技术和设备,针对城乡河网的特点指出清漂设备存在的不足,并提出了综合清漂设备的构思方案.     

两维翼水动力振动和流场显示的粒子图像测速实验

在小型循环水槽中进行两维翼水致振荡显示实验。流场显示以ＰＩＶ技术为主,辅以染料示踪技术。试验证明了ＰＩＶ技术可以应用于被动振动非定常复杂流场的测量中,并对两维翼流体旋涡诱发振动响应进行了分析。     

2kNm智能标准扭矩传感器的研制

国内标准扭矩传感器的精度亟需提高.文中叙述了对扭矩传感器的几项关键技术的研究,该传感器误差小于0.03%,达到国际先进水平.     

CAE技术在钢制折叠式托盘箱结构优化中的应用

钢制折叠式托盘箱回收成本低，广泛应用于食品、化工等行业，目前已成为主要物流运输工具。为了进一步降低回收成本，折叠式托盘箱的底盘高度被设计得越来越小，折叠后周转时托盘箱发生脱落已成为这类产品的典型问题。脱落的托盘箱的底盘横梁可能发生较大的塑性变形，影响托盘箱周转使用。     

耙吸挖泥船疏浚仿真初探

建立了耙头在垂直方向上运动的数学模型，采用面向对象的Visual C 和Delphi语言，开发了耙吸挖泥船疏浚仿真软件，给出了耙吸挖泥船泥泵启动、泥沙输送及装舱等过程的仿真示例。     

伪微分反馈次变量控制在倾摆系统中应用的仿真与试验研究

论述了伪微分反馈次变量（ＰＤＦＳＶ）控制方法。在摆式列车机电式倾摆系统中采用ＰＤＦＳＶ设计控制器，以加速度为次变量，能保证在倾摆过程中车体的加速度在允许值范围内，仿真和试验证明了这种控制器是切实可行的。     

A NEW METRIC APPROACH IN DESIGN PROCESS PLANNING

IntroductionIn today's competitive environment,it is nec-essary to deliver products on time and within bud-get. Unfortunately,design processes have beenplagued by the severe cost and schedule overruns.In the published papers,the reported averageschedule overrun ranges from 41 %to 2 5 8%,andcost overrun ranges from 97%to 1 5 1 %. Thisproblem persists in spite of the significantadvancesthat have been made in design technology over thelast two decades[1] . In many of the cases,thisproblem of ove…