高速公路机电系统升级的趋势、现状和要点

中国高速公路的不断建设,对高速公路机电系统提出了更高的要求.介绍了机电系统现状,分析了其将来的发展趋势,并指出了升级的要点.     

通用航空经济的演进路径及对区域的影响研究

本文运用产业生命周期理论研究了通用航空经济从萌芽期、发展期到成熟期的演进路径,分析了各时期通用航空经济对区域的影响范围及程度。研究成果可为我国通用航空经济的发展实践提供一定的理论参考。     

从工程科学走向工程技术——新时期交通与运载工程学科发展与展望

国家自然科学基金委员会积极推进基金改革，设立技术科学板块，面向国家重大需求和经济主战场，解决需求背后的核心技术科学问题，推动科研范式改革。交通与运载工程学科作为科学基金技术板块的重要组成部分，应当积极响应，及时调整学科资助政策。小学科，大行业，交通与运载工程学科研究呈现需求牵引、面向未来、技术集成、交叉融通的特点，需要进一步重视各交通体系交通诸要素的差异性和独特性，反对脱离行业、脱离应用对象，盲目梳理所谓的共性工程科学问题。推动基于RAMS(可靠性(Reliability)、可用性(Availability)、可维护性(Maintainability)和安全性(Safety))理论的工程科学与工程技术评价体系建设，关注各交通体系自身的特点及科学基础差异，强化其在重大、重点、人才等重要项目立项建议遴选、评审及成果后评估各环节中的应用，加快科学成果转化，支撑“交通强国”建设。      

上软下硬地层盾构隧道围岩应力释放率研究

为解决盾构隧道在上软下硬地层中掘进时开挖面应力释放率难以确定的问题，基于一种既有的体积损失率迭代求解应力释放率的方法，依托广州地铁21号线盾构穿越上软下硬地层实际工程，通过数值模拟研究掌子面不同软硬岩比例、不同埋深条件下的应力释放率变化趋势，并结合现场实测资料进行对比分析。研究结果表明： 1）在盾构隧道掘进穿越上软下硬地层分界面的过程中，围岩的初次应力释放率范围基本保持在24%~36%，且随掌子面硬岩比例的增加呈线性增加趋势； 2）相对于围岩条件而言，埋深对应力释放率的影响更小。此外，在盾构隧道穿越上软下硬地层的全过程模拟中，根据围岩变化情况随不同开挖步动态调整应力释放率这一做法较全程取一固定应力释放率值更为合理。     

信号交叉口行人二次过街下右转车通行能力与延误估计模型

在充分分析典型四相位交叉口行人二次过街设置前、后的行人流与右转车流冲突的前提下，以行人过街时间占有率和行人群到达分布作为分析指标，利用可插车间隙理论得出行人单向通行和双向通行条件下的右转车通行能力计算公式；根据行人流随机消散和集中消散的不同特征，应用随机分布理论推导出右转车穿越行人流的延误模型；并通过算例对比分析行人二次过街设置前、后右转车通行能力和延误的变化值。结果表明，除了在少数行人流量比较大的情况下， 行人二次过街的设置会小幅度减少右转车的延误；在其他大多数情况下，行人二次过街设置后， 右转车的通行能力将受到限制，延误增大，其中，平均通行能力降低了16.68%，平均延误时间增大 了21%，所以，当右转车交通需求较大时，需同时考虑行人和右转车的交通运行状态，优化设计是否采用行人二次过街，避免右转车超出极限忍耐时间而增大与行人冲突的概率。     

Purification effects of C2Cl6 on A00 aluminum

The effects of several fluxes on purification, microstructures and properties of A00 aluminum have been studied. The experimental results and analyses indicate that many cracks and large porosities exist in the surface film above the melt purified by C₂Cl₆ and that the film is floc and mostly composed of Al₂O₃ and pure aluminum, which carries many carbon particles and AlCl₃ not fully volatilized. And then over 50% (mass fraction) of the all-melting residue is pure aluminum, which is one of the major reasons for high melting loss. Moreover, because of a mass of gas bubbles and a state of seethe, there are many inclusions which size is under 10 ??m in the microstructure of A00 aluminum purified with C₂Cl₆ or fluxes containing C₂Cl₆. With this purifying method, the aluminum crystal grains are extended along the radius that was observed firstly and the average crystal size of A00 aluminum are about 100?C150 ??m. In addition, small size inclusions have little affected on tensile strength and micro inclusions under 10 ??m have little affected on elongation.     

A data model applied to the knowledge-based ICAS

Image-guided computer aided surgery system (ICAS) contributes to safeness and success of surgery operations by means of displaying anatomical structures and showing correlative information to surgeons in the process of operation. Based on analysis of requirements for ICAS, a new concept of clinical knowledge-based ICAS was proposed. Designing a reasonable data structure model is essential for realizing this new concept. The traditional data structure is limited in expressing and reusing the clinical knowledge such as locating an anatomical object, topological relations of anatomical objects and correlative clinical attributes. A data structure model called mixed adjacency lists by octree-path-chain (MALOC) was outlined, which can combine patient's images with clinical knowledge, as well as efficiently locate the instrument and search the objects' information. The efficiency of data structures was analyzed and experimental results were given in comparison to other traditional data structures. The result of the nasal surgery experiment proves that MALOC is a proper model for clinical knowledge-based ICAS that has advantages in not only locating the operative instrument precisely but also proving surgeons with real-time operation-correlative information. It is shown that the clinical knowledge-based ICAS with MALOC model has advantages in terms of safety and success of surgical operations, and help in accurately locating the operative instrument and providing operation-correlative knowledge and information to surgeons in the process of operations.     

Simulation and analysis of vehicle stability based on ADAMS/CAR differential brake

To improve the braking safety of automobiles, the author studied the effect of differential brake on the stabilities. To analyze the mechanical characteristics of differential brake, automotive subsystem models were built by applying ADAMS/CAR, and automotive mechanics simulation model was built by setting the main subsystems such as body, engine and brake. The simulation model studied the distribution mode of three kinds of differential brake, and beeline braking stability and turning braking stability were simulated. It shows that differential brake can amend turning shortage of automobile brake and improve its braking stability, but the effect of automobile mass on its braking stability is great. So the distribution mode of braking force and the effect of mass change should be considered while differential brake is applied.     

盐度层化对长江口水动力的影响

基于FVCOM三维水动力及盐度模型,在考虑盐度层化和不考虑盐度层化两种条件下对长江口附近海域进行了水动力盐度数值模拟。计算结果表明,盐度层化产生的紊动抑制对垂向紊动粘滞系数和水平流速有较明显的影响。与不考虑盐度层化的计算结果相比,考虑盐度层化后,垂向紊动粘滞系数变小,流速垂向平均值变大,表层流速变大,底层流速变小,与实测值更为吻合。