Suburban service in North America today—Which way will we go?

The current situation of suburban rail services is reviewed. Differences between seemingly similar services—urban transit, commuter service, suburban rail service and regional rail -are discussed. The suburban rail commuter is described as the true intermodal traveler. Differences of the political backgrounds of the inner-city compared to the suburbs complicate implementation of programs to improve service and suggest deep problems over the long term. Because the transition of suburban rail service from the private to public sector has been so recent, it is difficult for many to recognize that the profit of the service is in the lower total transportation costs for the community as compared to a cash dividend. Existing railroad lines in many cities have the potential of being a cost-effective solution to traffic problems, although the specific solutions vary widely, ranging from the operation of new commuter trains over the lines of a heavy duty railroad (Toronto) to a completely new light rail system (San Diego).     

Wanting to travel,more or less: Exploring the determinants of the deficit and surfeit of personal travel

This study investigates the determinants of peoples desire to increase or decrease the amount of travel they do. We use data from 1,357 working commuters, residents of three different neighborhoods in the San Francisco Bay Area, California. The dependent variables are indicators of Relative Desired Mobility for ten categories of travel (short- and long-distance overall and by several mode- and purpose-specific categories). These variables are measured on a five-point ordinal scale ranging from much less to much more, through which the respondents indicated the amount of travel they want to do (in the category in question) compared to what they are doing now. Censored ordered probit models were developed for these variables, with explanatory variables including general travel attitudes, specific liking for travel in each of the same separate categories, objective and subjective measures of the amount currently traveled in each category, and personality, lifestyle, and socio-demographic characteristics. The results support the hypotheses that the liking for travel has a strong positive impact, and subjective qualitative assessments of mobility have a strong negative impact, on the desire to increase ones travel. Finally, a number of general types of effects on Relative Desired Mobility were identified, among them complementarity and substitution effects. The results of this study can provide policy makers and researchers with new and valuable insight into key principles that affect individual travel demand.     

The advantages of a high density,mixed land use,linear urban development

This paper describes the land use and transport characteristics of a strip of urban development located along the northern shore of Hong Kong Island. The strip of land, with an area of 22.5 sq. km, is 17 km long and has an average width of 1.3 km. It has a population of approximately one million and provides over 700,000 jobs. Despite its small size, it accommodates the CBD, residential districts, shopping complexes as well as most of the civic/institutional facilities that a city needs. Its urban form is linear not by design but by default – the topography of the area has constrained the development from spreading sideways. Surprisingly however, apart from economy in land utilization, it is considered to possess three other good qualities: high accessibility enjoyed by residents; few roads and commercially viable public transport. Its travel characteristics are analyzed, using results of a home interview survey conducted by the Government in 1992. In addition, various statistics published by the Government and public transport authorities are also used in the analysis.     

Performance of radial-type metal foam diesel particulate filters

An analytical study of the performance of a radial-type, metal foam diesel particulate filter is reported. A mathematical model for the filtration and regeneration of soot in a metal foam filter was developed. Nickel foam was selected for the filter medium due to its large specific area, high porosity, and high thermal resistance. For various metal foams, the filtration efficiency and the pressure drop through the filter were calculated, as was the deposition of soot. The results from the analytical model were compared with experimental data. In comparison with a conventional wall flow filter, the metal foam diesel particulate filter (DPF) is effective in utilizing the volume of material, due to the porous structures. As the size of the metal foam pores in the DPF increases from 580 μm to 800 μm, the filtration efficiency decreases from 90% to 50%, and the pressure drop decreases from 380 mbar to 20 mbar. The metal foam DPF with a large pore size is effective in utilizing the volume of material with a small pressure drop. The regeneration is completed within four minutes by the flow of hot exhaust gases under full load conditions.     

Effect of fuel choice on nanoparticle emission factors in LPG-gasoline bi-fuel vehicles

Nanoparticle and gas-phase emission factors are presented for a liquefied petroleum gas (LPG) passenger vehicle and are compared to gasoline operation. A bi-fuel LPG-gasoline vehicle certified for use on either fuel was used as the test vehicle so that a direct comparison of the emissions could be made based on fuel choice. These values were considered along with previous studies to determine the relative change in particulate emissions due to fuel choice over a wide range of vehicles and operating conditions. The vehicle examined in this study was tested on a chassis dynamometer for both steadystate and transient conditions. Transient test cycles included the US FTP72 driving cycle, Japanese driving cycle and modified Indian driving cycle while steady-state tests were done at vehicle speeds ranging from 10–90 km/hr in various transmission gears. Exhaust particle size distributions were measured in real-time using a differential mobility spectrometer (DMS50), and particle number and particle mass emission factors were calculated. For both fuels, the majority of the particles ranged from 5 to 160 nm in terms of particle diameter, with typically more than 85% of the particles in the nucleation mode (between 5–50 nm). In most cases, the vehicle produced a greater fraction of larger (accumulation mode) particles when fuelled on LPG. Using the data in the literature as well as the data in the current study, gasoline fuel produces 4.6 times more particles in terms of number and 2.1 times more particles in terms of mass.     

Experimental investigation and comparison of nanoparticle emission characteristics in light-duty vehicles for two different fuels

In recent years, particle number emissions rather than particulate mass emissions in automotive engines have become the subject with controversial discussions. Recent results from studies of health effects imply that it is possible that particulate mass does not properly correlate with the variety of health effects attributed to engine exhaust. The concern is now focusing on nano-sized particles emitted from I. C. engines. In this study, particulate mass and particle number concentration emitted from light-duty vehicles were investigated for a better understanding of the characteristics of the engine PM from different types of fuels, such as gasoline and diesel fuel. Engine nano-particle mass and size distributions of four test vehicles were measured by a condensation particle counter system, which is recommended by the particle measurement program in Europe (PMP), at the end of a dilution tunnel along a NEDC test mode on a chassis dynamometer. We found that particle number concentrations of diesel passenger vehicles with DPF system are lower than gasoline passenger vehicles, but PM mass has some similar values. However, in diesel vehicles with DPF system, PM mass and particle number concentrations were greatly influenced by PM regeneration. Particle emissions in light-duty vehicles emitted about 90% at the ECE15 cycle in NEDC test mode, regardless of vehicle fuel type. Particle emissions at the early cold condition of engine were highly emitted in the test mode.     

Robust design optimization of suspension system considering steering pull reduction

This paper presents robust design optimization method to reduce steering pull phenomenon. One of the biggest causes of steering pull phenomenon is tolerance of suspension system such as hard point, spring, damper and bush. Therefore, the relationship between suspension systems and steering pull phenomenon has as nonlinear characteristics. But, it can be very difficult to evaluate the analytical design sensitivity. Thus, it is impossible to directly apply a well-developed optimization algorithm based on gradient information. To avoid these difficulty, this study uses sequential approximation optimization process based on a meta-model. The robust design process has 28 random design variables with tolerance. For efficient design process, the sample variances for the design goals are approximated from meta-models. The proposed approach required only 62 evaluations until it converged. Optimal design reduced the drift by 80% and its deviation by 38.7%, respectively. This result proves that the suggested design method of suspension system is effective and useful.     

Numerical Analysis of Thermal Distortion and Residual Stresses in H13 Steel Due to Vacuum Gas Quenching

IntroductionVacuumgasquenchinginvolvinghighpressuregasasacoolingmedium,is.anincreasinglypoPularheattreatffienttechniquefor1argesteeldieblocks,forexamPleHl3die.ItisconsideredessefltialtounderstandthentheeofthegasflowandtheinfiuencethishasontemPeratureprofilesandresultaflresidualstresseswithintheheattTeatedcomPonent.SimulatingthisprocessinvolvesthesimulationofgasflowinthefurnaceaswellasthesimulationofthethermalbehaviourofthecomPoneni.However,thereisnosinglecomPatersoftwarepackageavailabletot…     

Selection of techniques for reducing shipping NOx and SOx emissions

This paper develops a subjective generic methodology for providing ship owners with a transparent evaluation tool for selecting their preferred NOx and SOx control techniques. We quantitatively analyse the merits of the control methods available in marine air pollution control practice using data collected from shipping companies, shipyards and maritime academies. We also prioritize the applicable control techniques with respect to operational shipping environments.     

Effect of WO<Subscript>3</Subscript> nanoparticle loading on the microstructural,mechanical and corrosion resistance of Zn matrix/TiO<Subscript>2</Subscript>-WO<Subscript>3</Subscript> nanocomposite coatings for marine application

In this study, for marine application purposes, we evaluated the effect of process parameter and particle loading on the microstructure, mechanical reinforcement and corrosion resistance properties of a Zn-TiO₂-WO₃ nanocomposite produced via electrodeposition. We characterized the morphological properties of the composite coatings with a Scanning Electron Microscope (SEM) equipped with an Energy Dispersive Spectrometer (EDS). We carried out mechanical examination using a Dura Scan hardness tester and a CERT UMT-2 multi-functional tribological tester. We evaluated the corrosion properties by linear polarization in 3.5% NaCl. The results show that the coatings exhibited good stability and the quantitative particle loading greatly enhanced the structural and morphological properties, hardness behavior and corrosion resistance of the coatings. We observed the precipitation of this alloy on steel is greatly influenced by the composite characteristics.