Modeling and simulation of a dual-mode electrohydraulic fully variable valve train for four-stroke engines

In modern four-stroke automotive engine technology, variable valve timing and lift control offer potential benefits for making a high-performance engine. In this paper, a novel design named dual-mode electrohydraulic fully variable valve train (EHFVVT) for both engine intake and exhaust valves is introduced. The system is mainly controlled by either proportional flow control valves or proportional pressure relief valves, and hence two different families of valve displacement patterns can be achieved. The construction of the mathematical model of the valve train system and its dynamic analysis are also presented in this paper. Experimental and simulation results show that the dual-mode electrohydraulic variable valve train can achieve fully variable valve timing and lift control, and has the potential to eliminate the traditional throttle valve in the gasoline engines. With the proposed system, the engine performance at various speeds and loads will be significantly improved.     

Effects of stack array orientation on fuel cell efficiency for auxiliary power unit applications

The commercial fuel cell products currently appearing on the market are self-contained fuel cell engines. These engines can be used for many applications that are presently dominated by internal combustion engines or batteries. Vehicle mounted fuel cell auxiliary power units have been attracting attention lately. Additionally, there is a market based incentive to use multiple small fuel cell arrays in place of a single large fuel cell for some applications. Typically, fuel cells are designed to operate as stand-alone units. This paper investigates the ability of small commercial stacks to operate in common array arrangements. Although an individual Nexa is able to produce 1500 W, Dual Nexas do not maintain that capability while in array configurations. With an overall load share ratio of 1.02:1 the series array reliably produced 2900 W of power, while with an overall load share ratio of 1.09:1 the parallel array reliably produced only 2800 W of power. This study shows that array orientation affects both system stack net efficiency and individual stack net efficiency. The information gained from this study may be helpful for fuel cell design and integration.     

Improved theoretical modeling of a cyclone separator as a diesel soot particulate emission arrester

Particulate matter is considered to be the most harmful pollutant emitted into air from diesel engine exhaust, and its reduction is one of the most challenging problems in modern society. Several after-treatment retrofit programs have been proposed to control such emission, but to date, they suffer from high engineering complexity, high cost, thermal cracking, and increased back pressure, which in turn deteriorates diesel engine combustion performance. This paper proposes a solution for controlling diesel soot particulate emissions by an improved theoretical model for calculating the overall collection efficiency of a cyclone. The model considers the combined effect of collection efficiencies of both outer and inner vortices by introducing a particle distribution function to account for the non-uniform distribution of soot particles across the turbulent vortex section and by including the Cunningham correction factor for molecular slip of the particles. The cut size diameter model has also been modified and proposed by introducing the Cunningham correction factor for molecular slip of the separated soot particles under investigation. The results show good agreements with the existing theoretical and experimental studies of cyclones and diesel particulate filter flow characteristics of other applications.     

Low cost design of parallel parking assist system based on an ultrasonic sensor

This paper presents a low cost design and implementation of a parallel parking assist system (PPAS) based on ultrasonic sensors. Generally, a PPAS requires several types of sensors, such as an ultrasonic sensor, camera sensor, radar sensor and laser sensor for parking space detection. However, our proposed PPAS only requires two ultrasonic sensors on the front and lateral sides for parking space detection. Moreover, a steering angle sensor and wheel speed sensor installed in the vehicle are used to obtain vehicle position information for localization in ultrasonic range data. The hardware architecture of the PPAS based on an electronic control unit (ECU) module, sensor modules and a human machine interface (HMI) module was proposed. Moreover, the software architecture of the PPAS is based on system initialization, scheduling, recognition and a control algorithm. In particular, a novel sensor algorithm was proposed to minimize the vehicle corner error of the ultrasonic sensor. A prototype of the PPAS based on the proposed architecture was constructed. The experimental results demonstrate that the implemented prototype is robust and successfully performs parking space detection and automatic steering control. Finally, the low cost design and implementation of the PPAS was possible due to the cheap ultrasonic sensors, simple hardware design and low computational complexity of the proposed algorithm.     

Model-based control of an electropneumatic brake system for commercial vehicles

A properly functioning brake system is critical for ensuring the safe operation of any vehicle on roadways. Commercial vehicles such as trucks, tractors-trailers and buses are equipped with an air brake system that uses compressed air as the energy transmitting medium. This paper presents a model-based control scheme for an electropneumatic brake system for use in commercial vehicles. A mathematical model for an electropneumatic brake system was developed and corroborated with experimental data. A control scheme was developed based on this model and was used to regulate the pressure of air inside the brake chamber according to a desired pressure trajectory. This control scheme was implemented on an experimental test bench, and its performance was studied for various values of the controller parameter. The control scheme was tested for various desired pressure trajectories reflecting actual brake operation.     

Robust flight-to-gate assignment using flight presence probabilities

In this paper we present a novel method to improve the robustness of solutions to the Flight-to-Gate Assignment Problem (FGAP), with the aim to reduce the need for gate re-planning due to unpredicted flight schedule disturbances in the daily operations at an airport. We propose an approach in which the deterministic gate constraints are replaced by stochastic gate constraints that incorporate the inherent stochastic flight delays in such a way so as to ensure that the expected gate conflict probability of two flights assigned to the same gate at the same time does not exceed a user-specified value. The novel approach is integrated into an existing multiple time slot FGAP model that relies on a binary integer programming formulation and is tested using real-life data pertaining to Amsterdam Airport Schiphol. The results confirm that the proposed approach holds out great promise to improve the robustness of the FGAP solutions.     

Behavior of taxi customers in hailing vacant taxis: a nested logit model for policy analysis

This study models and examines the taxi customers' preferences for hailing vacant taxis on streets. A stated preference survey was conducted to randomly select and interview 1242 taxi customers at taxi stands and pedestrians on streets, who had experiences of taking taxis recently, about their choices under different given hypothetical scenarios. In total, 4968 observations were collected and used for developing the discrete choice models for the analysis. To account for the potential correlations among alternatives, two nested logit models are developed, calibrated, and compared with a standard multinomial logit model in the investigation. The results of likelihood ratio test demonstrate that one of the developed nested logit models is better than the standard multinomial logit model to describe the search behavior of taxi customers. The model results also show that the walking time to and the waiting time at the location for hailing taxis, the extra travel time to the destination because of local circulation for finding a way from the pickup location heading to a passenger's destination, as well as the taxi customers' perceptions for walking to and waiting at taxi stands were found as significant factors to influence their decisions. In addition, the results of market segmentation analysis illustrate the variations in taxi‐search strategies of taxi customers in different districts and regions. Some policy implications on introducing more taxi stands and improving the utilization rates of taxi stands are also discussed. We believe that the proposed models, findings, and discussion are useful for developing micro‐simulation models to evaluate the performance of road traffic networks with taxi services and developing simulation‐based optimization models to answer policy questions related to taxi services. Copyright © 2015 John Wiley & Sons, Ltd.     

A simulation tool for bicycle sharing systems in multimodal networks

This paper presents a methodology for modelling an urban transport system, integrating public bicycles in a multi-modal network. A bike cost function that reproduces the effect of slopes on cycling speeds is proposed. Also, the effect of traffic levels on the attractiveness of cycling routes is taken into account. The model applies the modal split and network assignment phases in a multimodal network with different classes of users. It has been verified over a test network and then validated by applying it to a real case in the city of Santander in Spain. The results obtained make this model a useful decision-making tool to encourage the use of the public bicycle from a sustainable development point of view.     

Controlling Structural Deformation of Surrounding Rock Passed by a Deep-Buried Tunnel北大核心CSCD

Layered rock masses with rapid and serious initial deformation and anisotropy regarding the spatial dis-tribution of the failure are encountered during the construction of many large and deeply buried tunnels on the Lan-zhou-Chongqing railway. It is difficult to deal with the resulting problems with conventional control measures, and additional support measures are frequently needed, which significantly affects construction. Focusing on this special large non-linear deformation, the failure mechanism of the large structural deformation of layered rock masses is thor-oughly analyzed by geological site surveys, laboratory tests, site tests and 3DEC discrete element numerical simula-tion. The research results show that high geostress induces rapid and strong squeezing deformation after excavation in low-strength rock masses, and anisotropy of the layered rock mass controls the stress redistribution after excava-tion and the asymmetrical distribution of tunnel section deformation. Based on the asymmetric deformation mecha-nism of the rock mass, a directional support measure for the disturbance anisotropy of the layered rock mass is pro-posed as a rock mass control to reinforce it in an active way. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

I can’t believe your attitude: a joint estimation of best worst attitudes and electric vehicle choice

The number of conventionally fuelled motor vehicles in use is increasing worldwide despite warnings about finite fossil fuel and the detrimental impacts of burning such fuels. While electric vehicles, the subject of much research, generate far less emissions and offer the potential for power from renewable sources, they are yet to significantly penetrate the market. Tangible barriers such as price and vehicle range still exist, but consumer attitudes also drive behaviour. This paper examines attributes in a framework relatively new to transportation and energy policy; best–worst scaling. This method is widely considered an improvement over traditional methods of eliciting attitudes and beliefs, where respondents select attitudes they find best or worst from a set of attitudinal statements. To avoid potential endogeneity bias, we jointly model attitudes and choice for the first time with best–worst data. It is found that energy crisis, air quality and climate change concerns influence behaviour with respect to vehicle range and that travel behaviour change and forms of government incentives are needed influences on behaviour with respect to vehicle emissions. It is argued that correctly modelling attitudes reduces the error term of the vehicle choice model and provides policy makers with an improved lens for assessing behaviour. Additionally, the methods described within can easily be adapted to other policy scenarios.