Adoption of Internet Services in Liner Shipping: An Empirical Study of Shippers in Taiwan

Abstract

The Internet service attributes desired by shippers were examined as well as a model that seeks to explain the intention of shippers to use Internet services in liner shipping. Using data collected from a survey of a group of shippers in Taiwan, the relationships among the constructs in the model were tested, namely: perceived usefulness, perceived ease of use, security and use intention. The results suggest that shippers perceive tracing to be the most important service attribute of Internet services, followed by checking for customs clearance, vessel schedules and electronic document services. The findings indicate that perceived ease of use is the major factor affecting the intention of shippers to use Internet services, and that perceived ease of use has a strong positive effect on perceived usefulness. The results also indicate that security has a positive effect on a shipper’s perception of ease of use. However, the influence of security on use intention and perceived usefulness was not supported in this study. The theoretical and practical implications of the findings on the intention of shippers to use Internet services in liner shipping are discussed.     

Transport Network Design Problem under Uncertainty: A Review and New Developments

This paper aims to provide a state-of-the-art review of the transport network design problem (NDP) under uncertainty and to present some new developments on a bi-objective-reliable NDP (BORNDP) model that explicitly optimizes the capacity reliability and travel time reliability under demand uncertainty. Both are useful performance measures that can describe the supply-side reliability and demand-side reliability of a road network. A simulation-based multi-objective genetic algorithm solution procedure, which consists of a traffic assignment algorithm, a genetic algorithm, a Pareto filter, and a Monte-Carlo simulation, is developed to solve the proposed BORNDP model. A numerical example based on the capacity enhancement problem is presented to demonstrate the tradeoff between capacity reliability and travel time reliability in the NDP.     

Modelling car trip generations for UK residential developments using data from TRICS

Abstract

This paper models trip generation for a cross-section of residential developments around the UK. Consistent with recent literature, the empirical model tests whether trip making patterns for residential developments are independent of car ownership and finds that trip generation is dependent upon car ownership socio-economic factors and site-specific characteristics, in particular land-zone type (e.g. town centre, out of town, etc.). However, public transport services are not found to have a significant relationship with trip generation; consequently, a policy implication of the results is that increasing bus services to residential developments is not associated with a reduction in generated trips.     

Flexible strategic planning of transport systems

Abstract

This paper presents a decision support methodology for long-range planning of transport systems that exhibits strategic flexibility and stochastic system parameters. Unlike one-off strategic decisions, flexible decisions should be dynamically reformulated with time. The proposed methodology is based on the construction of a tree structure of multiple interlinked tactical planning problems, each associated with a scenario in the tree, where problems under scenarios at intermediate dates incorporate in their formulation the solution of the corresponding problems associated with past (future) connected scenarios. The resulting tree structure of interconnected planning decisions becomes a strategic-tactical decision support system that allows managers to formulate suitable flexible strategic decisions that mitigate the consequences associated with downside scenarios while taking advantage of the upside opportunities. The methodology is applied to the planning of a fleet deployment through charter contracts where contract prices depend on both market behavior and the duration of the contract itself.     

Defect control at nanoscale and flux pinning enhancement in MgB2 superconductor

Defect control at nanoscale of MgB2 by doping various nanoparticles including Ti,C,nano-diamond,and HoB4,and their roles played to enhance flux pinning force in MgB2 arc compared and analyzed.These nan...     

The biogeochemical cycling of methane in Ria de Vigo, NW Spain: Sediment processing and sea–air exchange

Methane (CH₄) concentrations were measured in the water column, in sediment porewaters, and in atmospheric air, in the Ría de Vigo, NW Spain, during both the onset (April 2003) and at the end of (September 2004) seasonal upwelling. In addition, CH₄ concentration and stable isotopic signatures (δ¹³CH₄) were measured in porewaters, and sediment methanogenesis and aerobic oxidation of CH₄ were determined in sediment incubations. Surface water column CH₄ (2 m depth) was in the range 3–180 nmol l^− 1 (110–8500% saturation) and followed a generally landward increase but with localised maxima in both the inner and middle Ría. These maxima were consistent with CH₄ inputs from underlying porewaters in which CH₄ concentrations were up to 3 orders of magnitude higher (maximum 350 μmol l^− 1). Surface water CH₄ concentrations were approximately three times higher in September than in April, consistent with a significant benthic CH₄ flux driven by enhanced sediment methanogenesis following the summer productivity maximum. CH₄ and δ¹³CH₄ in sediment porewaters and in incubated sediment slurries (20 °C) revealed significant sediment CH₄ oxidation, with an apparent isotopic fractionation factor (r_c) of  1.004. Using turbulent diffusion models of air–sea exchange we estimate an annual emission of atmospheric CH₄ from the Ría de Vigo of 18–44 × 10⁶ g (1.1–2.7 × 10⁶ mol). This estimate is approximately 1–2 orders of magnitude lower than a previous estimate based on a bubble transport model.     

Performance characteristics of a supplementary stack-cooling system for fuel-cell vehicles using a carbon dioxide air-conditioning unit

In fuel-cell-powered vehicles, the fuel-cell system requires a thermal-management subsystem to dissipate heat released during the reaction of hydrogen with oxygen. When the stack generates power at a high rate, a large amount of heat is also generated. If cooling by the radiator is insufficient, a supplementary stack-cooling system is needed to maintain a safe operating temperature. In this study, the performance of a CO₂ air-conditioning unit for stack cooling was investigated under various conditions, and the relationship between cabin cooling and stack cooling was also studied. The coefficient of performance (COP) increased from 1.9 to 2.4, with an increase in cabin-air inlet flow rate from 0 to 8 m³/min. When the air-conditioning unit was turned off, the cooling capacity of the stack cooler was increased; correspondingly, as the cabin-cooling capacity was increased, that of the stack cooler decreased. With an increase in ambient-air inlet temperature from 38°C to 45°C, the COP decreased by 24%. Additionally, both the stack-cooling capacity and cabin-cooling capacity were decreased by about 12% and 16%, respectively, due to reduced heat transfer in the gas cooler as the ambient air inlet temperature was increased. It is expected that the experimental results can serve as a resource in designing a stack-cooling system using a CO₂ air-conditioning unit to enhance stack power generation and efficiency.     

New procedure to estimate the brake warping in a roller tester

Vehicle systems such as the steering, brakes and suspension greatly influence vehicle safety. Therefore, these systems must be inspected to guarantee that they are functioning correctly and to certify that the vehicle is functioning at a satisfactory safety level. In disc brakes, warping is one of the principal reasons for vibrations and noise, and it contributes to diminished brake efficiency. Currently, the International Motor Vehicle Inspection Committee (CITA) demands disc brake warping inspections occur during periodic motor vehicle inspections (PMVIs); however, the procedure to carry out this inspection is not well defined. In this investigation, the warping phenomenon has been analyzed, and a new inspection procedure is proposed.     

Accelerated life prediction of fillet-type,gas-welded joints

In this paper, in order to save time and cost for the fatigue design and to develop the optimum approaches for accelerated life prediction of the fillet gas welded joints, the (Δσ)_R − N_f relationship was obtained from actual fatigue test data, including welding residual stress. Based on these results, the (Δσ_a)_R − (N_f)_ALP relationship derived from the method of statistical probability analysis was compared with the actual fatigue test data. From the result, the optimum statistical distribution for the accelerated life prediction was analyzed to be the lognormal distribution for the fillet-type, gas-welded joint. The mean accuracy of the accelerated life prediction was assessed to be 85∼95% of the actual test life at the 95% reliability level and ±15% standard deviation. Therefore, it is expected that the accelerated life prediction will provide a useful method for determining the criterion for fatigue design and for predicting a specific target life.     

Optimizing the shape of a bumper beam section considering pedestrian protection

This paper presents a design technique to optimize the shape of a vehicle bumper beam that satisfies both the safety requirements for a front rigid-wall impact and the regulations protecting pedestrians from lower leg injuries caused by bumper impacts. An intermediate response surface modeling (IRSM) technique was introduced to approximate the non-linear force-displacement curves obtained from the front impact analysis of a vehicle bumper. The accuracy of the IRSM model was tested by comparing its results with those of the non-linear finite element analysis. The maximum displacement error between the two models did not exceed 3%. Using pedestrian impact analyses based on the experimental arrangement of the Plackett-Burman design, the approximate functions describing the response values acting on the lower legs were calculated. The shape of the bumper beam was optimized by integrating the IRSM with the force-displacement model and the approximate functions on lower leg impact. The optimization results satisfied safety regulations on the maximum allowable displacement of the vehicle bumper, and also the regulations protecting pedestrians from lower leg injuries caused by bumper impacts.