Effect of the number of fuel injector holes on characteristics of combustion and emissions in a diesel engine

The diesel combustion process is highly dependent on fuel injection parameters, and understanding fuel spray development is essential for proper control of the process. One of the critical factors for controlling the rate of mixing of fuel and air is the number of injector holes in a diesel engine. This study was intended to explore the behavior of the formation of spray mixtures, combustion, and emissions as a function of the number of injector hole changes; from this work, we propose an optimal number of holes for superior emissions and engine performance in diesel engine applications. The results show that increasing the number of holes significantly influences evaporation, atomization, and combustion. However, when the number of holes exceeds a certain threshold, there is an adverse effect on combustion and emissions due to a lack of the air entrainment required for the achievement of a stoichiometric mixture.     

考虑引桥工作状态下的短跨板桥的车致动力反应

通过把车辆和桥梁看作一个耦合系统来建立模型去求解桥梁的车致动力反应。文中研究了由AASHTO HS20卡车引起的不同跨径的短板桥的动力反应。利用参数分析来研究不同车速及不同路面状况所产生的效应。研究发现,引起桥梁动力反应峰值的临界车速遵循描述列车致桥梁共振的规则。分析中考虑了引桥状态的影响包括引桥桥头断层及引桥板形变。虽然引桥变形对桥梁的动力反应影响微小,但是在研究中却发现引桥桥头断层能在短跨板桥中引起显著的动力反应。该文对评价既有短跨径桥梁的动力性能有很大的意义,因此值得中国从业者借鉴。     

Traffic-balancing algorithm for can systems with dual communication channels to enhance the network capacity

The controller area network (CAN) is the dominant protocol for in-vehicle network (IVN) systems because it provides bounded transmission delay among electronic control units (ECUs) at data rates between 100 Kbps and 1 Mbps. Many automotive companies have chosen the CAN protocol for their chassis network system of intelligent vehicles. However, the increasing number of ECUs in intelligent vehicles and the need for more intelligent functions require a network system with more network capacity and real-time capability. As one approach to enhance the network capacity of a CAN system, this paper introduces a CAN system with dual communication channels. This paper also presents a traffic-balancing algorithm that predicts the traffic of each channel and allocates frames to the most appropriate channel. An experimental testbed using commercial off-the-shelf microcontrollers with two CAN controllers was used to demonstrate the feasibility of the traffic-balancing algorithm.     

沥青混合料烟雾与材料力学性能之间的关系

着重于研究热拌沥青混合料生产过程中产生的烟雾与沥青力学性能之间的关系,涉及的影响因素有温度、沥青种类以及一些动力学参数。研究者在试验室拌和机上安装了气体取样设备,能够在正常拌和的同时对热拌沥青混合料烟雾中的多环芳香烃(PAH)以及有机化合物(TOC)进行取样分析。通过对沥青材料进行室内性能指标的测试,发现在所有指标中回收沥青的复合模量与沥青烟雾排放量的相关性最好,因为它的结果同时反映了材料的物理性能以及沥青氧化和老化的程度。同时还建立了热拌沥青混合料烟雾排放与拌和参数以及混合料力学性能之间的关系。     

六边形钢丝网状加筋拉拔特性试验研究

以六边形钢丝网作为加筋材料,在室内模拟拉拔试验箱中进行了大型拉拔试验。得出了在不同的法向应力条件下六边形钢丝网的拉拔强度、破坏模式以及不同部位位移变化规律。     

编者的话

近期。美国“三巨头“的命运一直受各方关注。原以为3月30日能有个基本的论断,谁知奥巴马政府又抛出给通用60天、给克莱斯勒30天的“最后期限”。其中唯一还未申请政府救援的福特公司最近成功削减债务达99亿美元;而克莱斯勒和菲亚特公司的合作现今看来也比较顺利,如果达成协议,联邦政府有可能追加60亿美元的贷款;唯独通用的命运依旧令人摸不着头脑。任通用CEO长达8年之久的瓦格纳被迫下台．其工作由前通用汽车公司总裁兼首席执行官Fritz Henderson接任。     

Type synthesis of function-generating mechanisms for seat suspensions

Mechanisms with “negative” stiffness are a unique tool used to significantly improve vibration isolation for a vehicle driver via upgrade of the seat suspension. However, connection of such mechanisms to the suspension results in errors in the function generation process, and in most cases, makes motion impossible. An approach to type synthesis is presented in order to make this process more predictable, easy and thus more practical for the upgrade process. Structural classification of the suspensions is presented, and -an atlas of function-generating mechanisms for suspensions that reveals the effect of “negative” stiffness is completed. All of the function-generating mechanisms appear in the atlas as result of enumeration. Structural properties of novel and existing mechanisms are compared. Finally, some advantages in practical use of novel suspensions with “negative” stiffness are illustrated.     

Investigation of the shear flows over a sunroof opening based on a linear inviscid instability analysis

The large-scale shear flows over the sunroof opening of a mid-sized SUV measured using a PIV system were investigated. The shear flows were measured for five different cases of deflector protrusion (one case was the baseline test without deflector) at two different free stream flow velocities below the critical velocity where the buffeting noise level reached a maximum. The structures of the shear flows were observed to differ, apparently depending on whether the radiated buffeting noise is relatively strong or not. For strongly buffeting experimental cases, the momentum thicknesses of the shear layers were observed to grow rapidly and saturated at a station near the downstream edge of the sunroof opening, where the saturation of the transverse velocity fluctuations was also observed, and where the vortex coalescence process was presumably completed. On the other hand, no discrete large-scale vortex structures were observed for none-buffeting or weakly buffeting cases. Streamwise growth of the velocity fluctuations was found to be well predicted by a linear hydrodynamic instability analysis for the strongly buffeting cases. Numerical results obtained from a linear inviscid instability analysis using a hyperbolic tangent mean velocity profile were used to calculate the amplification factors with the initial momentum thickness and the streamwise fluctuation wavenumber. The shear flows were found to form large-scale discrete vortices when the linear inviscid amplification factors exceeded a threshold amplification factor.     

Effects of mixture stratification on HCCI combustion of DME in a rapid compression and expansion machine

Compression ignition of homogeneous charges in internal combustion (IC) engines is expected to offer high efficiency of DI diesel engines without high levels of NOx and particulate emissions. This study is intended to find ways of extending the rich limit of HCCI operation, one of the problems yet to be overcome. Exhaust emissions characteristics are also explored through analyses of the combustion products. DME fuel, either mixed with air before induction or directly injected into the combustion chamber of a rapid compression and expansion machine, is compressed to ignite under various conditions of compression ratio, equivalence ratio, and injection timing. The characteristics of the resulting combustion and exhaust emissions are discussed in terms of the rate of heat release computed from the measured pressure, and the concentrations of THC, CO, and NOx are measured by FT-IR and CLD. The experimental data to date show that operation without knock is possible with mixtures of higher equivalence ratio when DME is directly injected rather than when it is inducted in the form of a perfectly homogeneous fuel-air mixture. Although fuel injected early in the compression stroke promotes homogeneity of the DME-air mixture in the cylinder, it causes the mixture to ignite too early to secure good thermal efficiency and knock-free operation at high loads. Low temperature reactions occur at about 660K regardless of the fueling methods, fuel injection timing and equivalence ratio. The main components of hydrocarbon emissions turned out to be unburned fuel (DME), formaldehyde and methane.     

Effect of fuel injection strategies on the combustion process in a PFI boosted SI engine

A low-cost solution based on fuel injection strategies was investigated to optimize the combustion process in a boosted port fuel injection spark ignition (PFI SI) engine. The goal was to reduce the fuel consumption and pollutant emissions while maintaining performance. The effect of fuel injection was analyzed for the closed and open valve conditions, and the multiple injection strategies (MIS) based on double and triple fuel injection in the open-valve condition. The tests were performed on an optical accessible single-cylinder PFI SI engine equipped with an external boost device. The engine was operated at full load and with a stoichiometric ratio equivalent to that of commercial gasolines. Optical techniques based on 2D-digital imaging were used to follow the flame propagation from the flame kernel to late combustion phase. In particular, the diffusion-controlled flames near the valves and cylinder walls, due to fuel deposition, were studied. In these conditions, the presence of soot was measured by two-color pyrometry, and correlated with engine parameters and exhaust emissions measured by conventional methods. The open valve fuel injection strategies demonstrated better combustion process efficiency than the closed ones. They provided very low soot levels in the combustion chamber and engine exhaust, and a reduction in specific fuel consumption. The multiple injection strategies proved to be the best solution in terms of performance, soot concentration, and fuel consumption.