车辆吸能部件的碰撞试验与数值仿真

为了设计某列车耐撞性车体,实现列车被动安全保护,进行了台车碰撞试验和数值仿真计算,研究了耐撞性车体吸能部件的吸能特性。在台车撞击试验过程中,吸能部件从预期部位开始发生稳定有序的塑性变形,吸收的冲击动能与最大变形量基本成正比关系,说明该部件具有良好的吸能效果。并在此基础上,应用显式动力有限元理论建立了其有限元撞击模型,进行了数值仿真计算。相关性分析结果表明:仿真结果与试验结果基本一致,在整个撞击过程中,撞击力曲线基本吻合,最大撞击力峰值分别为2486·3、2423·1kN,最大变形量误差和初始撞击力峰值误差都小于3%,反弹速度误差小于4%。显然,利用撞击试验验证了数值计算的有效性和可靠性,利用数值计算设计和优化车辆吸能部件是可行的。     

高速列车司机室内气动噪声预测

为了降低司机室内的噪声,采用大涡模拟法计算了高速列车车头曲面的脉动压力,将脉动压力作为头车司机室有限元分析的激励载荷,通过谐响应分析求得司机室壁板的振动速度,将振动速度作为司机室声场边界元模型的激励条件,求出了司机室内的气动噪声在不同频率点的声压分布。计算结果表明:司机室内的声压级在52·3~58·8dB(A)之间变化,声压级较大点位于司机室前窗玻璃向车顶过渡处及纵向中截面型线附近,且在50~315Hz之间,声压幅值较大;司机室内的气动噪声主要是低频噪声,对纵向中截面型线采取更平滑的过渡形式,可降低司机室内的气动噪声。     

基于单调关联系统的驾驶行为可靠度计算方法

为合理评估驾驶员驾驶行为的可靠性,提出了驾驶行为可靠度计算方法,将人机系统可靠性理论与驾驶行为链相结合,构建了基于感知、判断、操作元件及模块组的驾驶行为可靠性框图,确定了单项器官元件可靠度测试与计算方法,运用单调关联系统理论给出了功能模块可靠度及驾驶行为系统可靠度的量化模型,计算了模型中各生理、心理元件概率重要度,分析了其对驾驶行为的影响度。计算结果表明:事故组与非事故组间行为可靠性存在明显差异,非事故组的可靠性整体大于事故组,但整体可靠性呈下降趋势,事故组驾驶员整体操作稳定性较差;生理因素对驾驶行为可靠度影响度前期较大后期较小,而心理因素则相反。     

钢桥面铺装混合料三轴重复加载试验变形特性

为了研究钢桥面铺装材料的高温变形特性及其车辙预估方法,针对MA及SMA两种钢桥面铺装混合料,采用三轴重复加载试验评价其高温性能,并根据试验结果,通过多元线性回归得到材料的非线性计算模型参数,使用ABAQUS有限元软件,模拟三轴试验过程,将计算变形与实测变形相比较。发现两种混合料高温变形发展规律以及对不同荷载条件的响应方式不同,SMA具有优异的高温抗变形能力;有限元模拟的误差约为10%。分析结果表明:采用三轴重复加载试验和多元线性回归确定材料的非线性计算模型参数的方法可靠,模型参数可用于沥青桥面铺装的车辙变形预估。     

浅谈水中墩桩的施工

本文结合钻孔灌注桩施工实践,根据水中墩桩的施工特点与要求,从泥浆布局,清渣排浆,泥浆固化处理,成孔,钢筋笼,灌注水下混凝土等方面作了较全面的阐述。     

两种算法在公路评标中的运用对比

选择正确的承包商直接影响业主的利益和工程质量,在我国,评标方法已经有一定的发展,其中以GRA算法及最小隶属度偏差法为代表,通过介绍两种算法运用在评标过程的思路及计算步骤,对其进行分析比较,指出其相同点和不同点。     

贵阳市公交线两规划方法研究

贵阳是山地城市,城市路网、交通结构与居民出行方式特殊,公交的服务水平、现状存在问题及发展方案有别于其他城市,故传统的公交线网规划方法在贵阳存在一定的局限性.本文通过分析当前运用广泛的层次规划法,结合贵阳公交的现状及发展趋势,在满足居民出行需求的基础上,提出了基于公交客流的线网规划方法.     

һ�����͵��˶�Ŀ��ʶ��������㷨�о�

提出了一种应用于智能交通监控系统的运动目标识别和跟踪方法。针对帧间差分提取运动目标的缺陷与不足,提出了一种基于冗余小波变换的运动目标识别算法,即直接在冗余小波变换域提取运动区域,从而检测出运动目标。对于检测出来的运动目标,本文对mean-shift算法进行了改进,采用自适应mean-shift算法,对目标进行跟踪。实验结果表明,本文提出的算法可以有效地提取运动目标,即使目标与背景具有较高的相似度,也可以较准确的提取出前景运动信息,效果要好于传统的帧差法;跟踪目标准确度高,不受目标大小变化的影响。本算法具较高的实用价值和应用前景。     

Gasket life criteria at low temperatures adopting proportional compensation for loss of flexibility and conformability

In the automobile industry, the service life of gaskets is defined as the time until which a released gasket recovers 60 % of the original compression. It was observed that the recovery curves of gaskets were highly nonlinear at high temperatures, and relatively nonlinear at temperatures above the room temperature. However, it was also noted that the recovery curves of the gaskets at temperatures below room temperature exhibited linearity with respect to the ln(time). Automotive manufacturers demand gasket life criteria that exceed a specific time or the entire life of a car. In the case of gaskets used at lower temperatures, since materials encounter losses in its flexibility and conformability, the definition of service life specifying a 60 % recovery may not be sufficiently safe to eliminate possible leakages. In this study, new gasket life criteria that could be used at low temperatures were proposed. The new criteria were proposed based on the change in Young’s modulus of the gasket material in order to conserve the sealing capability.     

Effects of Residual Ash on Dpf Capture and Regeneration

To study the effects of residual ash on the capture and regeneration of a diesel particulate filter (DPF), repeated capture and complete regeneration experiments were conducted. An engine exhaust particulate sizer was used to measure the particle size distribution of diesel in the front and back of DPF. Discrepancies in the size distribution of the particulate matter in repeated trapping tests were analyzed. To achieve complete DPF regeneration, a DPF regeneration system using nonthermal plasma technology was established. The regeneration carbon removal mass and peak temperatures of DPF internal measuring points were monitored to evaluate the effect of regeneration. The mechanism explaining the influence of residual ash on DPF capture and regeneration was thoroughly investigated. Results indicate that the DPF trapping efficiencies of the nuclear-mode particles and ultrafine particles have significant improvements with the increase quantity of residual ash, from 90 % and 96.01 % to 94.17 % and 97.27 %, respectively. The exhaust backpressure of the DPF rises from 9.41 kPa to 11.24 kPa. Heat transfer in the DPF is improved with ash, and the peak temperatures of the measuring points accordingly increase. By comparing the regeneration trials, the elapsed time for complete regeneration and time difference for reaching the peak temperature between adjacent reaction interfaces are extended with increased quantity of ash. The carbon removal mass rises by 34.00 %.