On-board aging estimation using half-cell voltage curves for LiFePO<Subscript>4</Subscript> cathode-based lithium-ion batteries for EV applications

The aim of this work is the design of an algorithm for on-board determination of the actual capacity of a lithium iron phosphate (LFP) cathode-based lithium-ion battery for electric vehicle applications. The presented approach is based on the detection of the predominant aging mechanisms (in terms of loss of lithium and loss of active material in both electrodes) by determining the single electrode voltage curves. The information related to the characteristic length and position of the voltage plateaus, which can be gathered during battery operation, can be used to obtain the actual aging state of the cells. The length of the plateaus depends on the respective position that the voltage curves of the single electrodes have in relation to each other. Relating the change of the plateau characteristics to the possible aging mechanisms allows the determination of the actual battery aging state in terms of total cell capacity. The work presents a possible implementation of an algorithm for capacity determination based on the described methodology. The algorithm is validated with various differently aged LFP cells. Furthermore, the work discusses the ability of the method to detect the actual battery capacity if the characteristics of only part of the quasi-OCV (open circuit voltage) curve are detected. Achieved accuracy and existing limitations are described and discussed in detail.     

轮-轴组件的三维弹性接触分析

本文根据接触问题的参变量最小势能原理,建立了接触问题的有限元参数二次规划解,并以RE_2型车轴为例,按三维接触模型进行了计算分析。     

基于分形理论的交通事故分析

以某市交通事故统计资料为例,首先采用功率谱分析方法论证了分形理论用于交通事故分析的可行性,计算结果表明在统计意义上,该市交通事故时间序列具有自仿射性。接着利用分形的自相似性与标度不变性将内区间的分形特性进行延拓,并由此构造了具有外推功能的分形插值算法,实现交通事故预测。该算法利用内区间的迭代函数系和吸引子由特定初始点进行搜索,通过迭代使得到的点集与吸引子的均方偏差最小,从而获得需要外推点的函数值作为预测值。最后对交通事故时间序列进行R/S分析,进一步验证了预测结果的合理性,结果表明该市未来几年交通事故仍有增长趋势,应继续加强交通管理。     

Scientific requirements for an abyssal benthic laboratory

For over thirty years man has studied “outer space” and installed satellites which watch the surface of the Earth. The great depths of the world ocean are, however, practically unknown and there is an urgent need to put abyssal benthic laboratories into “inner space” in order to study basic phenomena of interest to marine science and climatology as well as man's impact on the oceans.In view of the numerous problems related to global change, as a first step emphasis should first be on the role of the oceans and their inherent processes, which are the focus of such international programmes as the World Ocean Circulation Experiment (WOCE) and the Joint Global Ocean Flux Study (JGOFS). Multi-disciplinary registration of key events at selected key sites investigating the variability in time and space are of the utmost importance. The same methods and techniques must be used for the study of human impacts on the deep oceans caused by mining of metalliferous resources and by waste disposal as well as in basic studies. However, the investigation of the inner space of our planet has certain requirements. As long-term and large-scale investigations become more and more important, development of automized systems, largely independent from research vessels will be required. This will demand high capacities of energy for all technical functions as well as high storage capacities for data and samples. As a consequence the needs for two different—although overlapping—functional approaches are defined for future deep-sea deployments.(A) A system for long-term registration of the natural variability and long-term monitoring of human impacts: (B) A system for short-term observations and short-time experimentations. This report summarizes their technological demands. The envisioned interdisciplinary technology should deliver information on physical, biological and geochemical processes and their variabilities in the deep oceans. The prospected systems need to have the ability for real time video observation, data transfer and experimental manipulation, as well as sensing and sampling facilities with large storage capacities for long-term deployments.Prospective costs of the described multipurpose abyssal benthic laboratory will presumably exceed the funds for deep-sea research of a single country. A joint European effort could solve this problem and help to manifest a leading role for European marine science in international deep-sea and global change research.     

基于GIS和BIM的航电枢纽施工动态可视化信息管理

针对在航电枢纽工程施工管理中场景可视化模拟的不足,提出航电枢纽工程信息化模型概念,并基于GIS、3 ds Max和数据库技术,建立航电枢纽工程信息化模型构建方法,实现航电枢纽全要素在全生命周期的动态可视化模拟;基于BIM 4D工程动态管理思想,提出航电枢纽施工动态可视化信息管理方法。基于依兰航电枢纽工程资料,利用GIS组件式二次开发,研发依兰航电枢纽施工动态可视化信息管理系统,验证了本文提出的施工动态可视化信息管理方法的可行性,推动水利行业现代化、信息化和规范化的进程。     

CATIA modeling method of ship hull with hull line as data input北大核心CSCD

[Objective]To simplify the ship modeling process and improve modeling efficiency, this paper proposes a method for rapidly implementing hull model creation based on hull line drawing.[Methods]Using the CATIA platform, this method adopts the component application architecture (CAA) development tool for secondary development. First, by reading the geometry elements and label information of the hull lines in a drawing, the transformation of the offset points from 2D to 3D is realized. On this basis, the creation of the hull lines, stern and bow is completed, and a 3D wireframe model obtained. Finally, the hull 3D modeling is completed in conjunction with the CATIA native surface creation command. The stability and reliability verification of the developed type value extraction and bow generation program is then carried out via application analysis.[Results]The results show that the compiled program can realize the automatic creation of offset points, transverse lines, waterlines, profile lines and other boundary lines except the top line of the wall, and the centerline and tangent lines created by the bow generator are easily modified and simple for users to operate. [Conclusions]The verification results show that the method of a creating hull model using Generative Shape Design and Drafting with the hull line drawing as the data input is stable, reliable and able to realize rapid hull modeling, giving it certain practical value. © The Author(s) 2022.     

Tributyltin in marine sediments and Philippine green mussels (Perna viridis) in Manila Bay

Tributyltin (TBT) is a pollutant, mainly introduced to the environment as insecticides, fungicides, bactericides, wood preservatives and marine antifouling agent. Concentrations of TBT and its degradation products were isolated from the bivalve Perna viridis and marine sediments collected from selected coastal areas along Manila Bay. In all samples, the extremely toxic TBT compound was detected, calculated as Sn. In sediments, measured concentration ranged from the limit of detection of 0.5 to 9.0 ng Sn g^?1. Highest levels of TBT were observed at the inner and northern part of the bay, adjacent to coastal areas of varying land and water use (i.e., aquaculture, fishpond, mangrove forests, industrial establishments, and ports). However, the levels decrease near the bay entrance. Accumulation in this area can also be deduced from the movement of the prevailing wind and hydrodynamic behavior of the bay during the time of sampling, which transports suspended sediments from the eastern coast of Manila to the northern coast of Bulacan. In green mussels, the levels of TBT ranged from 2.1 to 8.9 ng Sn g^?1. While these values are relatively low, concentrations as low as 0.659 ng Sn g^?1 have been reported to be toxic to molluscs. The environmental levels of organotin species determined in the samples are comparatively low by global standards. Nevertheless, there is a need to estimate the levels of TBT in coastal waters and its associated uses, to evaluate the effectiveness of imposed regulation prohibiting the application of organotin compounds (OTs) as biocides in antifouling agents on ships and aquaculture facilities.     

北京市铁路噪声特性实例分析研究

通过实际测量及数据分析，认为测量现场昼夜等效声级达到 ７７７ ｄ Ｂ（ Ａ），超过了国家标准；快速列车噪声频谱分布复杂，难以治理；列车鸣笛对铁路噪声超标贡献最大，验证了铁路噪声与列车车速的关系，最后提出控制铁路噪声的建议。     

铁路货车防盗系统设计

针对铁路运输的货物在途中被盗现象，提出了货车、集装箱防盗系统的设计原理，给出了系统硬件结构示意图和软件设计框图并对其在 Ｔ Ｍ Ｉ Ｓ中的使用前景进行了展望。     

NGTD12DD——德累斯登第二代城市轻轨列车

0引言 自从德国统一以来德累斯登交通运输公司(DVB)一直在实施更新改造.在机车车辆更新方面,采用了低地板技术.该公司首先在所属的维修厂成功地对部分老式Tatra有轨电车进行了现代化改造.