Multimode trip information detection using personal trajectory data

Handheld global positioning system (GPS) devices can serve as a new tool to collect an individual's trip information with advantages of low cost, accurate data, and intensive spatial coverage. Various machine learning algorithms have been explored to detected trip train information in previous studies; however, few of them focused on the evaluation and comparison of the performance and applicability of different models. Meanwhile, according to previous studies, car and bus mode detection is a thorny issue due to their similar travel characteristics, and algorithms still need to be well explored and improved to solve this problem. In this article, an innovative method is proposed to detect trip information, including trip modes, mode-changing time and location, and other attributes, from personal trajectory data. The method is a two-step process. A machine learning algorith-based module (including artificial neural network, support vector machine, random forests, and Bayesian network) is firstly used to identify walk, bicycle, and motorized trip modes (bus or car); we thoroughly compared the performance of these four algorithms. Then a second module, using critical points on the GPS trajectories, is further developed to distinguish car and bus mode, incorporated with GIS map information. Field test results show that the proposed machine learning models can all be applied for walk, bicycle, and motorized mode detection with high detection rates exceeding 90%; however, the algorithms work relatively poorly for bus and car mode detection, with results mostly below 75%. The proposed two-step method can greatly improve bus and car mode detection accuracy by 14–30%. As a result, the average mode detection rates for all the four modes are above 90%. Compared with mode detection results by using only the machine learning algorithm, the proposed two-step method has much better performance in both accuracy and consistency.     

钢铝混合车身前处理关键技术研究

传统磷化工艺对钢铝混合处理的能力存在一定不足,比如工作液沉渣量大,成膜效果欠佳,为后续涂装带来漆膜颗粒、性能下降等不良影响。为解决上述问题,以不同的钢铝面积比分别进行沉渣量、膜重、微观形貌等试验,以及对前处理关键设备进行了对比研究。通过分析试验结果,得出钢铝面积比不同会导致沉渣量和成膜效果的差异,找出了适用于不同的铝合金面积比的前处理工艺,为钢铝混合车身的涂装线建设提供技术支持。     

面向船舶小组立的门式机器人焊接系统应用

整理焊接机器人软硬件的发展情况。通过与传统制造过程的生产效率对比,论述门式机器人焊接系统在船舶小组立中的应用优势,梳理该系统的应用难题,并提出该系统的发展方向,为船舶制造在精益生产、智能制造、数字化/自动化/集成化方面补齐短板。     

双馈变频供电的电力推进系统研究

文章提出了一种由双馈发电机提供变频电源,驱动变频电机的电力推进系统。该系统通过对双馈发电机转子励磁,产生变压变频电源驱动电机调速运行。由于双馈发电机转子侧只需提供转差功率,使得变频器的容量较小,可以在一定程度上缓解电力推进对变频器容量需求较高的问题。文章给出了电力推进系统的结构框架,建立了系统的数学模型,并根据所建立的数学模型,利用MATLAB对其进行了仿真分析,验证了此电力推进系统变频调速的可行性。     

地震作用下松散斜坡崩塌拟静力离心模型试验

根据拟静力法思想,通过改变沙堆模型底坡不同角度值的方式来模拟不同地震烈度大小对斜坡崩塌的影响。对试验技术进行分析表明,改变不同的沙堆模型底坡角度值会引起不同的水平峰值加速度,从而模拟不同地震烈度大小对松散体斜坡崩塌的影响。     

209HS型转向架下旁承蠕变现象分析

对提速客车209HS型转向架超高分子量聚乙烯下旁承蠕变问题进行了分析,提出了选用改性聚酰胺材料作为下旁承磨耗板材料的方案,并对下旁承结构进行了调整,经装车试用,磨耗板状态良好,解决了209HS型转向架原超高分子量聚乙烯下旁承蠕变问题。     

车辆传动装置密封环摩擦状态辨识的试验研究

为探讨车辆传动装置的密封环早期失效的原因,掌握密封摩擦状态转变规律及其对密封性能的影响,利用传动装置密封性能试验台,测得摩擦因数-工况参数曲线(即f-G曲线),研究了不同油温条件下密封摩擦状态的变化规律,分析了密封环摩擦状态转变对密封性能的影响.结果表明,在设定的试验条件下,通过f-G曲线可揭示密封环在高速重载工况下摩擦状态转变规律及其辨识特征;密封环摩擦状态的转变对泄漏量的影响有限,而对密封环温升的影响较为显著.     

全液压混合动力港口起重机的使用效益及设计特点

为进一步节能减排,提出将电力和柴油作为港口起重机的混合动力.分析混合动力优越性.从9个方面详细阐述了混合动力起重机设计中要注意的问题.可供参考.     

黑龙江省口岸物流综合评价分析

通过分析黑龙江省边境口岸物流的发展状况,建立适合黑龙江省边境口岸物流系统的评价体系,并采用综合评价方法对黑龙江省一类口岸进行评价,明确黑龙江省边境口岸物流的发展方向,实现对黑龙江省边境口岸物流系统的量化分析,指出黑龙江省边境口岸发展的不足,为口岸建设与发展提供决策依据。     

中途站的合理位置设计与分析

本文重点对中途站的合理位置进行设计与分析,同时根据中途站的具体位置给出中途站样式的建议,希望能够优化中途站设计,不仅将中途站对交通的干扰降为最低,也力争做到以人为本。