On constructing certificateless proxy signature from certificateless signature

In proxy signature schemes, an original signer A delegates its signing capability to a proxy signer B, in such a way that B can sign message on behalf of A.The recipient of the final message verifies at the same time that B computes the signature and that A has delegated its signing capability to B.Recently many identity-based(ID-based) proxy signature schemes have been proposed, however, the problem of key escrow is inherent in this setting.Certificateless cryptography can overcome the key escrow problem.In this paper, we present a general security model for certificateless proxy signature scheme.Then, we give a method to construct a secure certificateless proxy scheme from a secure certificateless signature scheme, and prove that the security of the construction can be reduced to the security of the original certificateless signature scheme.     

Parallel Key-insulated Signature： Framework and Construction

To deal with the key-exposure problem in signature systems, a new framework named parallel key-insulated signature （PKIS） was introduced, and a concrete PKIS scheme was proposed. Compared with traditional key-insulated signature （KIS） schemes, the proposed PKIS scheme allows a frequent updating for temporary secret keys without increasing the risk of helper key-exposure. Moreover, the proposed PKIS scheme does not collapse even if some （not all） of the helper keys and some of the temporary secret keys are simultaneously exposed. As a result, the security of the PKIS scheme is greatly enhanced, and the damage caused by key-exposure is successfully minimized.     

江阴大桥钢桥面沥青铺装实桥对比试验研究

结合江阴大桥钢桥面铺装研究课题,进行多方案修复试验段实桥对比试验,通过对实桥试验段使用状况的调查与对比分析,认为研发的新型改性沥青玛蹄脂既保留了原有的各项传统优点,又大幅提高了混合料的高温稳定性;并且"双层"环氧沥青和"下层浇注+上层环氧"的铺装结构均适用于大跨径悬索桥,最后,对研究的成果进行了工程应用,取得了良好的实际效果。     

LNG船齿轮箱基座预装工艺的优化

针对LNG船齿轮箱基座在船坞阶段安装产生的涂层破坏和对生产进度的影响,提出预总组的工艺阶段进行基座预装,并制定相应工艺,既满足了基座安装精度要求,又保证了涂装质量,确保质量的同时提高了产品建造效率。     

典型港口夏秋季节大气颗粒物污染特征与来源解析

本文选取秦皇岛港区为监测点,分别于夏、秋两季的代表月进行PM_(10)样品的采集与化学组分分析。结果表明,夏、秋两季采样期间秦皇岛港大气PM_(10)质量浓度平均值分别为93.5±44.6μg/m~3、131.5±69.1μg/m~3。夏、秋两季二次无机离子浓度分别为27.9μg/m~3与30.5μg/m~3,分别占总PM_(10)的29.8%与23.2%;夏季SO42-最高,浓度为11.7μg/m~3,占比为12.5%,秋季NO3-明显高于夏季,浓度为12.4μg/m~3。夏、秋季碳质组分浓度分别为26.3μg/m~3与33.5μg/m~3,占比分别为28.1%与25.5%;两季EC浓度相差不大,分别为4.1μg/m~3与4.4μg/m~3;一次排放是有机气溶胶的主要贡献源,两季POA占比分别为75.0%与73.5%。一次组分来源解析结果显示,土壤尘与冶金、机动车、燃煤、海盐与船舶是秦皇岛港大气PM_(10)的主要贡献源,平均贡献率分别为44.0%、16.5%、15.9%、10.8%与8.9%,港区空气污染治理应注重对船舶排放的控制。     

Incorporating work zone configuration factors into speed‐flow and capacity models

This study aims to develop work zone speed‐flow and capacity models, which incorporate work zone configuration factors including the number of work zones, geometrical alignment, work zone speed limit, and work zone length. On the basis of the traffic data from six work zone sites with various work zone configurations, two nonlinear traffic speed and flow models including work zone configuration factors are developed for the uncongested and congested traffic conditions, respectively. A work zone capacity model is proposed on the basis of the two models. The three models can further be used to examine the effects of work zone configuration factors on the speed‐flow relationship and capacity at work zones. Results show that traffic speed, traffic flow, and work zone capacity increase with the posted speed limit. Traffic speed under uncongested conditions decreases with the geometric alignment, the number of work zones, work zone length, and heavy vehicle percentage. Under congested conditions, the increase of the number of work zones is found to exhibit a larger negative impact on the traffic flow than the increase of geometric alignment. The number of work zones is also found to have the largest negative impacts on work zone capacity, followed by the geometric alignment. Short work zone length exhibits a relatively minor contribution to increasing work zone capacity. Copyright © 2014 John Wiley & Sons, Ltd.     

全自动无人驾驶地铁车辆空气断路器远程监视与复位方案

为了解决全自动无人驾驶地铁车辆中无法实现空气断路器的人工复位问题,针对全自动无人驾驶系统的特点,提出了空气断路器矩阵监控方案与空开远程复位方案.该方案在上海18号线无人驾驶地铁车辆上进行实际应用并取得良好的效果.     

基于无源雷达模拟器的幅度算法研究

以无源雷达模拟器为基础,讨论了在不同工作模式下,目标信号幅度的计算方法,并对两种工作模式下信号幅度的取值进行了仿真。针对微波器件频率特性引起的差异,介绍了一种信号幅度调整的方法,对于“真实”的模拟目标信号,具有一定的实践和指导意义。     

隧道新奥法原理与发展

首先探讨了围岩自承能力的力学机制,认为围岩自承能力来源于强度,围岩塑性强化区和弹性区是主要的承载结构。新奥法“充分发挥围岩自承能力”的观点可进一步表述为“基本维持围岩原始状态”,这是一种“显性”表述,提出了技术方向,具有可操作性。将能量最小原理分别应用于石质隧道和土质、破碎围岩隧道,对其具体含意进行了深入阐述,提出此原理可以作为判断各种施工方案优劣的依据。     

A NOVEL H_∞/LTR SYNTHESIS METHOD

11ntroductionObserver-basedcontrollersarewidelyadop-tedinthesynthesisofmultivariablefeedbackcontrolsystems.Theprocedureofdesigningsuchcontrollersisdividedintotwosteps,inthefirststep,astatefeedbackgainisdesignedsothattheresultingstatefeedbackloopmeetsagivendesignspecification;inthesecondstep,anobserverisdesignedtoreconstructthestate.Thereconstructedstatevectorismultipliedbythestatefeedbackgaintoproducethecontrolin-put.Theresultingcontrollersguaranteeclosed-loopstabilityaswellassatisfactoryperfo…