汽油/LPG两用燃料汽车排放控制

选择桑塔纳B2电喷轿车作为研究对象，利用车用液化石油气供给装置进行了桑塔纳发动机的改装工作，并进行了大量的匹配试验。得到了桑塔纳发动机燃用液化石油气后性能变化的定量数据和调整方法。经匹配后的发动机可以达到欧洲2号标准。     

现代摩托车制动防抱死系统原理、结构及维护(1)

近年来,随着摩托车交通事故的不断攀升,摩托车的行驶安全性已成为影响社会安定的一道屏障,传统鼓式制动器已经无法满足现代摩托车安全行驶的需要,唯有采用ABS主动安全系统才能满足要求。国外摩托车自1988年开始应用ABS技术以来,已从最初的大排量豪华摩托车发展到如今的中小排量豪华摩托车上,国产摩托车也已开始应用这一先进技术。     

POLO车载收放机的使用研究及改装

对POLO、BORA、PASSAT等车载收放机的使用进行研究;对收放机如何进行改装以使得外部音频信号可以输入收放机,以及充分利用车载音响系统来播放进行了详细的说明和阐述。     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

空调客车围护结构隔热设计方案比较研究

利用数值分析的方法，分析了空调客车非稳态情况下四种结构车厢体的二维温度场分布，计算了车厢体的二维传热损失和热桥附加传热损失。在骨架和内衬之间加一层隔热组织改善了车的隔热特性，为客车围护结构隔热优化提供了依据。     

燃料电池船舶复合供能系统控制策略设计与仿真

针对燃料电池船舶复合供能系统中的燃料电池功率波动问题和储能单元电池荷电状态（State of Charge,SOC）极端分化问题,依据系统拓扑结构,提出基于负载功率频率分解与模糊逻辑控制法相结合的复合供能系统控制策略设计。采用实例仿真验证该设计的优势。结果表明,该设计可有效保持燃料电池输出功率平滑,对储能单元SOC具有良好的均衡控制效果。     

碳纤维复合材料与铝合金连接方式选型研究

多材料混合车身设计是汽车轻量化的重要手段,其中铝和碳纤维的连接是轻量化车身结构设计和工艺装配面临的挑战.研究了SPR、FDR、抽芯铆钉3种连接方式及结构胶应用于碳纤维复合材料和铝合金异种材料的连接,测定了连接结构的剪切和十字拉伸性能,分析了连接方式和结构胶对力学性能和失效模式的影响,旨在指导碳纤维复合材料连接设计与选择...     

颗粒群特征对水泥性能的影响及改善途径研究

水泥颗粒状态与水泥及混凝土的许多主要性能都有较大关系.改善水泥颗粒群特征是水泥行业必须重视的课题.主要技术措施可采取改进水泥粉磨工艺、提高选粉机的选粉效率、采用助磨剂及应用椭圆球研磨体等,能明显改善水泥物理性能,提高水泥强度.     

长枕埋入式无碴轨道对谐振式轨道电路传输

对长枕埋入式无碴轨道泄漏电阻和感应阻抗对谐振式轨道电路传输特性的影响进行了分析,通过科学方法进行了测算,并提出了相应的解决方案,而且通过试验进行了验证,使得谐振式轨道电路在长枕埋入式无碴轨道上传输特性的改善有了科学依据.     

反渗透技术在高硬度高含盐量地下水中的应用研究

针对某地高含盐量高硬度地下水的特点,选择BW30-4040复合膜,采用二级反渗透工艺系统对其进行处理,以期达到内燃机车冷却水标准.试验考察了操作压力对产水量、脱盐率、回收率的影响,并根据溶解—扩散理论模型对实验结果进行了分析.通过运行试验,分析研究了与膜性能密切相关的主要参数的变化,并对膜的结垢倾向进行了分析.该系统的成功运行对广大西北铁路地区内燃机车冷却水的处理具有一定的借鉴作用.