汽车精密成型技术现状与发展趋势刍议

简述了汽车精密成型技术的内涵、特点及其在汽车制造中的地位，较深入地分析了目前国内外精密冲压、精密铸造、精密锻造和精密焊接技术等汽车精密成型技术的发展现状，并指出汽车精密成型未来发展的主要趋势。     

微型电动轿车车身骨架结构分析

利用ANSYS软件对某进口微型电动轿车车身骨架进行了强度、刚度和模态计算：分析了电动轿车车身骨架的结构特点和电瓶盒等钣金件的影响，提出了独立悬架边界条件的模拟方法。     

三维植被网路基边坡防护

三维植被网作为一种新型的坡面防护材料 ,具有很好的使用性能和推广价值。本文详细介绍其特点、优点以及施工工艺。并给出运用实例     

现代摩托车制动防抱死系统原理、结构及维护(1)

近年来,随着摩托车交通事故的不断攀升,摩托车的行驶安全性已成为影响社会安定的一道屏障,传统鼓式制动器已经无法满足现代摩托车安全行驶的需要,唯有采用ABS主动安全系统才能满足要求。国外摩托车自1988年开始应用ABS技术以来,已从最初的大排量豪华摩托车发展到如今的中小排量豪华摩托车上,国产摩托车也已开始应用这一先进技术。     

汽车正面碰撞法规中乘员保护指标探讨

比较美国、欧洲等国和我国汽车正面碰撞法规中对乘员保护指标的规定,结合人体冲击损伤机理和耐受极限的相关研究,分析我国法规中头部伤害指标HPC的不合理之处。在分析实车碰撞试验数据和模拟计算的基础上,指出我国正面碰撞法规中乘员保护指标的不完备性,并探讨影响伤害指标结果的一些因素。     

双离合器式自动变速器换挡特性研究

介绍了双离合式自动变速器工作原理，建立了换挡过程的数学模型，并对升、降挡的换挡特性进行了仿真与试验分析，为DCT的开发设计提供了参考依据。     

基于LMS自适应滤波的模糊控制主动悬架研究

以车辆操纵稳定性及行驶平顺性为控制目标，根据路面一车辆系统的特点，提出一种在线可调整的模糊控制算法，利用LMS自适应模块调整模糊控制器的自调整因子，改善单一模糊控制算法对专家先期经验的依赖。针对简化的车辆模型，以路面信号作为激励源，进行悬架系统的振动控制研究，结果表明提出的算法对车辆悬架系统的振动控制具有较好的适应性。     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

汽车半主动悬架的神经网络自适应控制

本文提出了用两个线性神经网络对汽车半主动悬架系统进行在线辨识和控制的策略，介绍了该控制系统中神经网络的在线训练方法，进行了仿真计算和结果分析。     

声强测量技术在摩托车噪声控制中的应用

本文介绍了声强测量技术在某１２５摩托车噪声控制中的应用，利用开发的ＣＥＣ声强测量分析系统对该摩托车进行噪声识别，快速，准确地找到其主要噪声源，通过有针对性地采取降噪措施，使该车行驶噪声显著降低。