卸船讥孺斗门开闭功能的改进

常规桥式抓斗卸船机漏斗门的控制存在不足,需要进行改进。介绍了卸船机的漏斗f1机构,分析了传统漏斗门的不足,设计并改进了控制方案。同时,在具体的项目上加以应用,取得了成功。     

OCMJ4×8B模块在分析仪器中的应用

本文介绍基于ADuC812单片机,利用OCMJ4×8B模块和偏压控制式氧传感器实现氧气浓度检测的仪器设计。通过电路图和软件流程图的方式介绍了系统的工作原理、硬件组成和液晶显示的数字化仪器设计思路。详细介绍了OCMJ4×8B模块的显示,操作的软件实现方法。对传感器零点、终点进行了软件校正,使零点和终点更准确,仪器工作更稳定。     

Analysis of the environmental benefits of a motorcycle idling stop policy at urban intersections

In an attempt to reduce CO₂ emissions from motorized transport, the Taiwanese government introduced an idling stop policy for vehicles in early 2007. This paper seeks to quantify the environmental benefits of the policy based on a stated preference analysis. Motorcyclists were surveyed at urban intersections in Taiwan, to identify the amount of time they would be willing to turn off their engines while waiting at traffic lights (the WTO). A contingent valuation framework based on stated preference questions was designed to determine the WTO. Results obtained from the Spike model showed that the average motorcyclist’s WTO is 82 s. In another analysis, in which other variables were taken into consideration, such as the possibility that the policy will be enacted as legislation, the expected WTO increased to 101 s. In both cases, an idling stop policy would have positive environmental effects, reducing gasoline usage by 1021 L per hour and reducing CO₂ emissions by 0.56 metric tons per hour at the intersection studied during peak periods.     

“低碳经济”背景下公路隧道照明节能策略

目前我国公路隧道运营照明存在的突出问题主要表现在:照明设计参数有待完善、照明控制方式较为落后、照明节能理念存在误区、照明设施养护未得重视。文章基于建设"环境友好型"公路隧道理念,从系统工程角度提出公路隧道照明节能的15项重要措施,包括准确测试洞外亮度、优化照明设计参数、选择使用节能光源等,基本涵盖公路隧道照明技术性节能、结构性节能、管理性节能的各个方面。工程实践表明,这些技术和措施可实现公路隧道照明综合节能20%以上的总体目标,具有较好的生态效益、经济效益和社会效益。     

膨胀岩土地层盾构隧道结构力学行为研究

文章在提出膨胀接触压力概念的基础上,采用接触单元对膨胀接触压力和膨胀力的关系进行了研究,得出了膨胀接触压力与膨胀岩土分布、厚度、结构及地层刚度等的关系;同时对膨胀岩土地层中盾构隧道"荷载-结构"模式外荷载及"梁-弹簧"模型的特点进行了分析;并将其分析结果直接应用到成都地铁2号线膨胀岩土地层盾构隧道的结构分析中,得出了盾构隧道在不同膨胀岩土层、膨胀力、埋深和拼装方式条件下的结构内力值,对隧道结构设计起到了指导作用。     

城市浅埋隧道的抗震及减震措施研究

随着城市浅埋隧道建设的快速发展,地下工程的抗震性能愈来愈受到关注,隧道结构的抗震、减震分析变得日益重要。文章综合论述了城市浅埋隧道的震害特点及减震措施,并阐述了浅埋隧道地震反应分析的实用方法,进而提出目前抗震设计中应该注意的问题,对改善城市浅埋隧道的抗震设计具有重要意义。     

桃树坪隧道富水未成岩粉细砂预加固施工技术

富水未成岩粉细砂隧道开挖后围岩极不稳定,呈流塑状,极易出现溜塌现象、造成初期支护变形侵限,甚至大的坍塌,严重影响到工程的质量、安全、工期及成本。为确保施工进度、安全及质量,必须采取预加固措施。文章结合兰渝铁路LYS-7标段桃树坪隧道出口段的施工实践,介绍了隧道出口富水未成岩粉细砂地层的高压旋喷注浆预加固技术。     

一种快速除法算法的FPGA实现

介绍了一种新的除法算法,该算法是利用Taylor公式,用两次乘法操作和一张较小的查找表实现。整个算法采用verilog语言描述,设计灵活、实现简单。仿真效果表明该算法具备较高的精度与较快的运算速度。     

Modeling heterogeneous risk-taking behavior in route choice: A stochastic dominance approach

This paper proposes a unified approach to modeling heterogonous risk-taking behavior in route choice based on the theory of stochastic dominance (SD). Specifically, the first-, second-, and third-order stochastic dominance (FSD, SSD, TSD) are respectively linked to insatiability, risk-aversion and ruin-aversion within the framework of utility maximization. The paths that may be selected by travelers of different risk-taking preferences can be obtained from the corresponding SD-admissible paths, which can be generated using general dynamic programming. This paper also analyzes the relationship between the SD-based approach and other route choice models that consider risk-taking behavior. These route choice models employ a variety of reliability indexes, which often make the problem of finding optimal paths intractable. We show that the optimal paths with respect to these reliability indexes often belong to one of the three SD-admissible path sets. This finding offers not only an interpretation of risk-taking behavior consistent with the SD theory for these route choice models, but also a unified and computationally viable solution approach through SD-admissible path sets, which are usually small and can be generated without having to enumerate all paths. A generic label-correcting algorithm is proposed to generate FSD-, SSD-, and TSD-admissible paths, and numerical experiments are conducted to test the algorithm and to verify the analytical results.     

输水盾构隧洞复合衬砌结构设计计算研究

软土有压输水盾构隧洞采用管片外衬和整筑预应力内衬作复合式衬砌的设计计算中,为能较好考虑内衬与外衬管片的相互作用,以及内衬预应力荷载在隧洞施工和运营各阶段对复合衬砌结构受力的影响,本文提出了一种新的实体叠合计算模型。由于确定管片纵缝接头抗弯刚度的复杂性,文中建议对用数值模拟管片纵缝接头刚度采用了一种非线性耦合弹簧＂接触对＂的模拟系统。在采用实体单元建模的条件下,由于计入管片接头刚度的力学处理困难,文中研究了一种能以模拟管片接头刚度的简化计算方法。根据内、外衬砌接触界面处理方式的不同,文中提出了5种适合不同界面条件内、外层衬砌的相互作用模型。此外,本文还研制了内衬预应力荷载的一种转化程序,以解决采用等效荷载法施加预应力时的前处理问题。上述各点创意构思已在南水北调中线一期穿黄隧洞的结构设计研究中得到了具体反映和成功应用。