现代摩托车制动防抱死系统原理、结构及维护(1)

近年来,随着摩托车交通事故的不断攀升,摩托车的行驶安全性已成为影响社会安定的一道屏障,传统鼓式制动器已经无法满足现代摩托车安全行驶的需要,唯有采用ABS主动安全系统才能满足要求。国外摩托车自1988年开始应用ABS技术以来,已从最初的大排量豪华摩托车发展到如今的中小排量豪华摩托车上,国产摩托车也已开始应用这一先进技术。     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

空调客车围护结构隔热设计方案比较研究

利用数值分析的方法，分析了空调客车非稳态情况下四种结构车厢体的二维温度场分布，计算了车厢体的二维传热损失和热桥附加传热损失。在骨架和内衬之间加一层隔热组织改善了车的隔热特性，为客车围护结构隔热优化提供了依据。     

大城市社会公共停车场选址规划模型研究

在考虑交通系统总体效益的基础上，采用数学分析的方法对社会公共停车场的规划布局进行定量分析，提出基于广义费用最小的最优社会公共停车场选址模型，以确定城市内社会公共停车场的合理布局，使城市交通系统总体效益达到最优。     

论稀浆封层、改性稀浆封层、微表处之异同

随着我国大量高速公路进入维修养护期,稀浆封层、改性稀浆封层、微表处等路面预防性养护技术受到了前所未有的关注。从定义、技术要求、应用范围等多方面出发,分析这三项预防性养护技术的异同,有助于公路工程者以科学的态、度,从实际情况出发,因地制宜,进行严格的甄选。     

智能交通系统中信息情报板优化设计

信息情报板是智能交通系统中信息发布的主要手段之一,对其进行合理的结构设计,是保证信息发布效果的重要技术措施。在分析驾驶员从发现信息板到采取行动的全过程的基础上,提出的一种信息情报板结构优化模型．可用于信息情报板结构优化的实践当中。     

城市节段预制拼装箱梁桥结构设计的技术特点与创新

介绍了城市桥梁采用分箱式主梁、整体大悬挑横梁墩梁固结的新型节段预制拼装箱梁结构形式.针对城市预制拼装桥梁的特点,从结构体系、结构构造及施工方法等方面系统地提出了分箱室节段箱梁、半固结结构体系、基于施工效率的混合配束预应力体系、预应力转向锚固构造集成设计、横断面标准化、剪力键标准化、耐久性设计以及双幅同步架设施工等技术措...     

怠速充电工况下的电池SOC平衡控制

在分析单电机和双电机混合动力电动车发动机怠速充电工况下电池能量稳定性控制要求的基础上,提出了一种怠速充电工况电池SOC平衡的主动控制策略,并给出相应控制过程的能量控制目标值计算公式和相应的分析.通过对所提出的怠速充电工况电池SOC平衡控制策略进行仿真和实车测试,结果表明,该控制策略能有效控制电池SOC平衡,怠速充电过程...     

液化天然气储运中的翻滚现象及预防措施

介绍了液化天然气储运中的翻滚（涡旋）现象及预防措施,着重分析了液化天然气在储运中的翻滚机理,提出了相应的预防措施,以减少和消除翻滚现象,提高液化天然气在储运中的安全性。     

车身板件结构对汽车行车舒适性的影响

采用有限元与多体动力学相结合的方法分析了车身板件对振动的影响,改变车身板件局部结构,在对振动影响最大的前后地板上增加加强筋后对整车进行振动响应模拟,揭示了车身板件结构对汽车在路面激励下行车舒适性的影响。分析表明,在地板上增加加强筋可以极大地提高汽车的行车舒适性。