超深基坑施工中实施抽降深层承压水的措施

介绍了上海轨道交通10号线龙柏新村站—龙溪路站区间隧道中间井抽降第三砂层(⑨层)承压水的试验过程,分析了试验结果,并进行了数值模拟。施工实践表明:少量、短时间、控制性抽降⑨层承压水,对周边环境影响较小。     

轴对称解对隧道衬砌水压力计算的适用性研究

文章根据渗流理论推导了隧道衬砌水压力的轴对称解,并利用数值分析方法研究了轴对称解对不同形状隧道断面与浅埋隧道的适用性.研究结果表明:轴对称解适用于非圆形隧道断面衬砌水压力的估算;隧道断面形状对衬砌水压力折减系数的影响较小,可以忽略不计,其影响大小主要由衬砌与围岩的渗透系数比值决定.对于浅埋低水头隧道,用轴对称解计算的毛洞流量Qm与数值解比较,其误差较大,最大误差为36.5％;但用来计算衬砌水压力p1以及衬砌后水流量Q1时,误差相对较小,最大误差为6.3％,特别是利用轴对称解得出的衬砌水压力值与利用数值解得出的衬砌水压力特征值最大误差仅为3.4％.     

汶川地震震中区高速公路隧道超前地质预报方法

映汶高速公路公路位于四川汶川大地震震中,受地震强烈构造作用影响,隧址区岩体裂隙发育,松散破碎,存在构造富水,地震垮塌堆积体众多,地质条件极为复杂。文章根据本工程隧道的工程地质问题,通过对国内外隧道超前地质预报常用方法的分析,提出了针对本工程的隧道超前地质预报方案,并对地质预报的实施应用及效果进行了举例说明。     

软岩大变形隧道围岩分级及支护参数适宜性探讨

兰渝线兰广段通过板岩、碳质板岩等软岩区段的隧道极易发生大变形.在现场工程实践和试验的基础上,文章对该区段地质条件的特殊性进行了分析,并对目前隧道围岩基本分级及在施工过程中的设计变更修正进行了阐述,着重对软岩大变形隧道的围岩分级标准和选用支护参数的适宜性进行了探讨,以期能为今后同类工程提供参考和借鉴.     

构建西江现代物流体系 打造世界加工制造次中心

文章基于当前产业结构大调整背景,提出广西要在迎接产业转移的竞争中胜出,必须着力构建以西江水运为龙头的现代物流体系,从而把西江经济带打造成为与＂珠三角＂这一世界加工制造中心紧密联动的加工制造次中心。     

金门特长公路隧道通风方案比选研究

为解决目前特长公路隧道通风方案比选时局限于送排式通风的问题,从方案设计角度分析几种不同纵向通风模式的功能特点、适用条件,结合送排式通风与互补式通风的特点,提出单通道互补式通风的组合通风模式,并以金门特长公路隧道为例,从全寿命周期角度,对“通风井送排式”“单通道互补式”“双通道互补式”“吸尘式”4种通风方案进行比选研究。结果表明： 1）送排式通风受通风井位置影响较大,从运营通风角度,宜设置在上坡隧道中部偏下风方向; 2）互补式、吸尘式通风能够突破通风井选址的限制,但对于超过5 km的隧道,需要设置专用排烟井; 3）单通道互补式通风省去送风井,保留了送排式通风的排烟功能,具备比选价值。     

Numerical Simulation of Advanced Geological Forecasting Based on Multi- Source Seismic Interferometry北大核心CSCD

For existing advanced geological forecasting, the forecast distance is short and the test frequency is high, increasing test and construction risks. Since various methods have different requirements for the test environ-ment, preparation work can be tedious and result in a long construction time thereby affecting normal construction.A new advanced geological forecast technique based on multi-source seismic interferometry for tunnels is proposed.This technique uses the blast at one end of tunnel as a centrum and receives the signal at the other end of the tun-nel, therefore allowing advanced geological forecasting of the unexcavated tunnel part by relative processing and im-aging. A numerical simulation of this kind of geological forecasting using the finite difference method to simulate two kinds of unfavorable geological bodies (karst and a fault) predicted them accurately and verified the effective-ness and accuracy of this geological forecasting method. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

多模块连接半潜式平台稳性对比分析

为开发我国海洋丰富的渔业、油气和旅游资源,可以在指定海域布设超大型浮式结构物,作为综合保障基地,提供船舶停靠、人员居住、渔业加工、油气开发、环境监测、飞机起降等多种功能.考虑到建造、运输等因素,超大型浮式结构物一般由多个相同或相似模块连接组成.本文基于一型半潜式平台模块,分别开展单、双、三模块的稳性分析,并对其稳性分析结果进行对比分析,探讨模块数量对平台稳性的影响,为超大型浮式结构物的后续设计与运营提供参考.