终端区飞机排序的混合人工鱼群算法

为了保障飞行安全,对终端区着陆飞机进行有效的排序,建立了以航班延误总时间最小为目标函数的规划模型,以人工鱼群算法为基础,融合了遗传算法的选择操作和模拟退火算法的依概率接受的思想,形成混合人工鱼群算法,对着陆飞机排序问题进行了仿真计算,并与先到先服务算法、模拟退火算法以及蚁群算法进行了对比研究。仿真结果表明:与先到先服务相比,使用人工鱼群算法使得单跑道、双跑道延误分别减少了9·3%和48·0%,计算时间小于3s;与蚁群算法和模拟退火算法相比,求解的延误与时间最小,因此,提出的混合算法可行。     

综合重症监护病房患者呼吸机相关性肺炎的病原学和耐药性分析

目的探讨病原菌在综合重症监护病房(ICU)患者呼吸机相关性肺炎(VAP)中的分布及对常用抗生素的耐药情况。方法对我院2004-2006年综合ICU患者VAP病原菌的分布及耐药性进行回顾性统计分析。结果从302例综合ICU VAP患者下呼吸道深部分泌物标本中分离出347株病原菌,主要病原菌是铜绿假单胞菌(32.3%)、鲍曼不动杆菌(31.1%)、金黄色葡萄球菌(16.7%)、克雷伯菌(7.5%)与凝固酶阴性葡萄球菌(6.1%)。革兰阴性杆菌(G-杆菌)对哌拉西林、头孢噻肟耐药率最高,对碳青霉烯类及加酶抑制剂抗生素耐药率最低;革兰阳性球菌(G 球菌)对青霉素类、克林霉素及红霉素耐药率高,对万古霉素、喹诺酮类抗生素耐药率低。结论G-杆菌是综合ICU患者VAP最主要的病原菌,多重耐药性高;耐甲氧西林金黄色葡萄球菌(MRSA)和耐甲氧西林凝固酶阴性葡萄球菌(MR-SCNS)的分离率高且耐药严重。临床医师应根据病原菌学及抗菌药物敏感性资料,及时选择合理的抗生素控制感染,延缓耐药菌株的产生。     

番茄红素预防高脂喂饲大鼠脂质代谢紊乱的作用及机制探讨

目的探讨番茄红素对高脂喂饲大鼠脂代谢紊乱的作用及机制。方法用高脂饲料喂养大鼠,同时给予番茄红素灌胃,检测体重、血脂和肝组织脂质水平及肝组织的病理学变化,探讨可能的减肥机制。结果番茄红素可显著降低大鼠血清中胆固醇(TC)、甘油三酯(TG)、低密度脂蛋白胆固醇(LDL-C)水平及动脉粥样硬化指数(AI)(P<0.05),适当升高高密度脂蛋白胆固醇(HDL-C)水平;番茄红素中、高剂量组明显降低肝组织中TC、TG、LDL-C含量(P<0.05),中剂量组明显提高HDL-C水平(P<0.01)。病理观察显示,番茄红素各剂量组脂肪变性及肝细胞肿胀程度减轻,接近正常水平。结论番茄红素具有预防高脂饲料喂饲大鼠血清和肝组织脂代谢紊乱的作用,其机制可能是促进HDL-C合成,减少TC、TG、LDL-C在体内的蓄积。     

关于公路建设项目经济评价的几点思考

经济评价是通过财务评价和国民经济评价,分析项目的经济合理性和财务合理性,并作为项目是否建设的重要决定要素之一。交通量预测、评价指标的选取、征地补偿费用与土地机会成本、国民经济效益等计量的正确与否将直接影响项目经济评价的结果。     

勘察设计企业成本核算工作探究

结合勘察设计企业项目成本核算的特点,阐述了做好项目成本核算的意义、项目成本核算的实施。并对项目成本进行分析,针对其存在的问题,提出相关改进建议。     

钢管混凝土拱桥空间地震反应谱分析

对一座钢管混凝土拱桥,进行了空间有限元模拟分析,应用大型通用有限元程序ANSYS对大桥建立了模型,解决了桥梁细部诸如支座、刚臂等细节的处理;最后对大桥的有限元模型进行了动力特性计算,得到了振型、频率的数据,可以对大桥的动力性能做出评价,有助于今后建立大桥的档案和健康诊断评估。     

Development of analytical procedure for selection of control measures to reduce congestions at various freeway bottlenecks

Variable speed limit (VSL) and ramp metering (RM) affect freeway traffic operations in different ways and, accordingly, result in different effects on system travel time. The primary objective of this study is to propose an analytical procedure to help determine which control measure should be selected given different freeway bottlenecks and traffic conditions. The bottlenecks considered included an isolated merge bottleneck, a merge bottleneck with a closely spaced upstream off-ramp, and a diverge bottleneck with a closely spaced upstream on-ramp. Two RM and a VSL control strategies were considered, including the ALINEA, ALINEA/Q and feedback based VSL. The maximum achievable improvements in system efficiency by various control measures were calculated and the results were tested using modified cell transmission models. A coordinated control strategy that combined ALINEA/Q and VSL control was also proposed. The effects of VSL and RM control on system travel time at different freeway bottleneck areas were compared to identify the applicable conditions of different control measures. The analytical procedure was proposed for the selection of control measures at different bottlenecks and the ex-ante estimation of control effects were also discussed.     

基于复合磨蚀试验台的滚刀磨损试验研究

为提高TBM滚刀与地层的适应性,降低滚刀磨损速率,应用滚刀复合磨蚀试验台进行滚压磨损试验,对小尺寸滚刀开展不同岩性、几何参数（刃宽、刃形、直径）和贯入速度的磨损规律研究。通过对磨损量统计发现： 磨损量与岩样CAI值的平方正相关; 宽刃滚刀较窄刃滚刀磨损速率快; 圆刃滚刀相对平刃滚刀有更好的耐磨性; 滚刀直径与磨损速率相关性不强,但大直径滚刀具有径向磨损量大的优势; 在一定区间内较大的贯入速度能够减少刀具磨损,同时具备较高的破岩效率。     

川藏铁路某隧道不明气体成因机制研究

为解决复杂地质条件地区隧道工程建设中出现的不明气体问题,以川藏铁路某隧道出现不明气体为切入点,结合工程地质学、地球化学等学科交叉的研究方法与思路,对该不明气体的成因机制及演化特征进行研究,探索一种研究不明气体的新思路。基于现场采样测试与全天候监测,总结分析该不明气体成分特征及其演化规律,得出该不明气体为混合成因气体;同时,从不明气体的工程地质条件入手,着眼于区域油气资源和煤系地层的分布及区域地质构造、岩石裂隙发育情况,排除不明气体由其他地区运移而来的可能;在此基础上,进行岩石室内试验,通过对不明气体赋存环境进行地球化学分析,分别论证气体的有机成因及无机成因,得出该不明气体是原地产生的,经历了有机成因和无机成因2个阶段且储量有限,对工程后期影响不大,为隧道后期顺利施工提供了指导。     

Numerical Analysis of the Mixture Formation in a Two-Stroke Wall-Guided LPG DI Engine for Extended-Range Electric Vehicle

The use of automotive LPG characteristics which are easy to evaporate vaporization and carry. The paper presents a design of extended-range electric vehicle for wall-guided two stroke LPG engine with direct injection combustion system. Based on the modified vehicle LPG spray model, a database describing the characteristics of vehicle LPG fuel was built and imported into the CFD software. And the accuracy of the model is verified by the Schlieren experimental results. The concentration and velocity field of the mixture in the cylinder under different load conditions are numerically analyzed. The analyzed result indicated that the start injection time θ = 60°–70°CA BTDC under part load condition, the plug electrode near the gathering of a richer mixture is easy to be fired at spark ignition time, the obvious formation of mixture in cylinder is formed and the overall air-fuel ratio is above 40: 1. The start-transition working condition and large load conditions in the piston moves upward before closing the exhaust port to start injection LPG. The optimized LPG injection start time θ ensures that the fresh gas is locked in the cylinder when the exhaust port is closed (63°CA ABDC). In the ignition time of the spark plug, an ideal homogeneous mixture in the cylinder is realized.