Engine clutch torque estimation for parallel-type hybrid electric vehicles

This paper mainly focuses on the accurate estimation of the torque transferred through the engine clutch installed between the engine and the drive motor in parallel-type hybrid electric vehicles. The estimation of the engine clutch torque primarily relies on the forward-direction observer which uses the nominal engine net torque information. To overcome the limitation of using the nominal engine torque information that it may not be accurate during the transient states or due to the influence of external disturbance such as the road condition and wind, the forward-direction observer is supplemented by the use of reverse-direction observer which uses the driveline model and wheel speed measurements. In addition, the drive motor torque information is used to calibrate the nominal engine torque during the idle charging state, so that the driveline characteristic unique to parallel-type hybrid electric vehicle can be utilized to increase the estimation accuracy. Finally, the estimation performance of the designed observer is tested via simulation and experiments based on a real vehicle.     

Adaptive control of the shifting process in automatic transmissions

This paper focuses on the way of keeping shift quality of automatic transmissions consistent in mass production and with mileage accumulation. We investigate the main factors influencing the consistency of shift quality. Test results show that the torque to pressure (T2P) and pressure to current (P2I) characteristics of shifting elements are easily affected. A simulation model of an 8-speed automatic transmission is established to simulate the dynamic process of clutch-to-clutch shift. Simulation results demonstrate that the change of T2P and P2I characteristics has a significant influence on shift quality. In order to compensate for the influences, we develop two adaptive control strategies, i.e., the adaptive control strategies for torque phase and inertia phase. They make use of the measured speed information and time information to evaluate shift quality. Then the control parameters are tuned to adapt to the change of T2P and P2I characteristics. Vehicle tests verify that the developed adaptive control strategies are effective to keep shift quality consistent in mass production and with mileage accumulation.     

我国城市轨道交通发展政策研究

深入分析我国城市轨道交通6年来快速发展中存在的问题,包括规划、体制、建设速度等方面;为实现又好又快的发展目标,提出指导今后城市轨道交通发展的政策和措施建议。     

Research on the Influencing Factors on Quality of Railway Construction EPC Project from the Owner's PerspectiveEI北大核心

Research purposes: With the advancement of system reform of China railway, the railway construction project is promoting the application of general contracting (EPC) model, and in this mode, how the owners effectively control the construction quality has become the focus of the current research. To explore of the key factors influencing quality of railway construction project, based on the owner's perspective, from the three stages of design, procurement and construction selecting 10 factors, the DEMATEL method is adopted to analyze the logical relationship between various factors and mutual influence, screening factors which have higher centrality and causality as the key factors affecting the quality of the owner engineering. Research conclusions:(1) The design port and interface management, the comprehensive strength of the construction companies have high centrality and causality, which are the key factors influencing quality of the EPC railway construction project. (2) The situation of carrying out periodic inspection work belongs to the factor with low centrality and high causality. In the process of improving quality of the EPC railway construction project, this factor can be the secondary consideration. (3) The research result can provide scientific and effective references for improving quality of the EPC railway construction project from the owner's perspective. © 2018, Editorial Department of Journal of Railway Engineering Society. All right reserved.     

Impact Analysis of the Reduction Effect for Reducing Joint Position of Stick-slip Fault TunnelEI北大核心

Research purposes: Based on an engineering of traffic tunnel, anti-breaking model experiment of large-scale 1 :30 is carried out under fault dislocation. Reduction effect of three working conditions(working condition A of no reducing joint, B of staggered setting of reducing joint and dislocation surface, C of reducing joint set at dislocation position) is comparatively analyzed by analysis of contact pressure, lining strain and lining stress. The optimal location of reduction joint is explored. Research conclusions:(1)The reduction effect of different position of reducing joint is different, such as A相似文献   

表面处理对微型点焊镀镍钢板和镍板时电极失效的影响

本文主要研究了表面处理对微型点焊镀镍钢板和镍板时电极失效的影响。结果表明：微型点焊镀镍钢板和镍板时电极的失效主要是电极磨损和电极头部的塑性变形，电极磨损是由于电极和镀镍板之间局部焊接的断裂发生在电极表面而导致的。表面涂敷TiC的CuCrZr电极的寿命（1200点）是CuCrZr电极寿命（600点）的两倍，表面处理能提高电极寿命的主要原因是表面涂敷的TiC颗粒能阻碍电极和镀镍板之间的局部焊接以及减小电极表面的塑性变形。     

Modeling design of military equipment operational concepts by MBSE北大核心CSCD

［Objectives］In order to give full play to role of "operational concepts" in the engineering process of military equipment development, it is necessary to understand and form standardized operational concept documents (OCD), and study the modeling design of OCD in order to implement the transformation of the system engineering process from document-centric to model-centric. ［Methods］This study analyzes the US military's definition of operational concepts and introduces its hierarchical operational concepts, especially the bottom level ConOps or OpsCon, usually as a part of equipment acquisition and requirement engineering. Lessons are then drawn from the relevant theories and standards such as IEEE 29148:2018 and ANSI/AIAA G-043B-2018 of the operational concepts document outline in order to design the specifications of the OCD. Finally, key technologies are studied, including SysML-based OpsCon modeling, UML Profile-based OpsCon framework design and MSDL/C-BML-based operational scenario development.［Result］The results indicate the effectiveness of implementing the modeling design of OCDs. ［Conclusions］In the process of equipment requirement engineering, the results of this study can help to improve the efficiency of equipment requirement demonstration through an ambiguous operational concept model and an engineering environment for all stakeholders of the system. © 2022 Journal of Clinical Hepatology. All rights reserved.     

大武至久治公路门堂黄河大桥静载试验检测分析

青海省公路科研勘测设计院在大武至久治高速公路辅道工程测设时,线位在久治县门堂乡须跨越黄河,在制定跨越方案时考虑利用大久路现有的门堂黄河大桥(1995年建成通车),但该桥目前已正常服役近二十年,且在近期通过重车较多,为了解该桥实际受力状况,判断该桥上部结构目前承载能力能否满足原设计要求,对该桥进行了外观普查及静、动载荷试验。本文主要对该桥的静载试验做详细的阐述。     

The relative efficiency and financial risk assessment of shipping companies

Since shipping companies are highly competitive, we ask whether financial risk assessment tools impact company performance and, therefore competitiveness and efficiency. Stochastic Frontier Analysis (SFA) is used in the evaluation. Based on distinct features of the risk-return relationship, three cargo segments in the shipping industry are studied—dry bulk, liquid bulk, and containerized cargo. The influence of the risk assessment indicators on market and operational efficiency is subsequently determined using a panel regression to determine whether different asset allocation and risk management techniques improve the performance of shipping companies. In this analysis, 79 international shipping companies listed in Bloomberg Shipping Indices are included in the data collected from Thomson One for the period of 2001–2010. Efficiency estimation from the SFA shows that containerized cargo firms have better performance in both market and operating efficiencies. Operating efficiency performance is achieved by lowering liquidity. Market efficiency is improved by well-managed leverage level.     

Response of the Black Sea mean level to atmospheric pressure and wind forcing

The response of the Black Sea mean level to atmospheric pressure (AP) and wind forcing is investigated using 5 years of TOPEX/POSEIDON (T/P hereafter) data. A coherence analysis is first applied to mean sea level and pressure to examine the validity of the inverse barometer (IB) approximation over this area. As expected, it reveals very significant deviations from an IB response attributed to the narrowness of the Bosphorus Strait and its limiting role in water exchanges. A comparison is drawn with the Mediterranean Sea case. A single basin version of the Candela analytical model [Candela, J., 1991. The Gibraltar Strait and its role in the dynamics of the Mediterranean Sea. Dyn. Atmos. Oceans 15, 267–300], which takes linear friction at the strait into account, is then used. The model explains a significant part of the T/P mean sea level variance (about 30%, while the IB correction only explains 5% of its variance) and provides a means to correct the altimeter data for the pressure effect much better than the standard IB effect. The response of the mean sea level to wind forcing is then analysed. Coherence analysis between sea level and along-strait wind stress (WS) reveals a significant coherence at periods ranging from 40 to 100 days, with an almost steady phase of 270°. This result is confirmed with a multiple coherence analysis (mean sea level vs. WS and AP). A plausible mechanism is a piling-up of water at the northern or southern end of the strait due to along-strait wind forcing. The associated along-strait pressure gradient would modify the barotropic flow in the strait and then the mean sea level. Using an extension of the Candela model, we show that this mechanism is consistent with T/P mean sea level observations.