Development of a flow network simulation program part I — flow analysis

An in-house simulation program was developed that can be utilized to predict flow characteristics such as pressure and velocities in any flow network system comprising multiple flow components, i.e., pipe, pump, heat exchanger, valves, etc. Although the code is intended for applications to network flow systems in a vehicle, it is written in a generalized manner to handle any possible network configuration of flow components. Therefore, it can easily function in various industrial applications. The network system where the flow is assumed to be one-dimensional is mathematically formulated by applying two conservation rules, mass and energy, to each flow component. These rules produce a set of non-linear equations. These non-linear equations are solved iteratively by adopting the Newton-Raphson scheme. This program has been tested in many different cases to demonstrate its validity and applicability. In this paper, two examples are introduced to show how the program can be used to find solutions in real engineering problems. Throughout the study, it was found that the code can most efficiently be used to verify a proposed design concept in an early design stage of the vehicle development cycle. The thermal analysis portion of the program will be dealt with in Part II of the paper.     

Effects of mixture stratification on HCCI combustion of DME in a rapid compression and expansion machine

Compression ignition of homogeneous charges in internal combustion (IC) engines is expected to offer high efficiency of DI diesel engines without high levels of NOx and particulate emissions. This study is intended to find ways of extending the rich limit of HCCI operation, one of the problems yet to be overcome. Exhaust emissions characteristics are also explored through analyses of the combustion products. DME fuel, either mixed with air before induction or directly injected into the combustion chamber of a rapid compression and expansion machine, is compressed to ignite under various conditions of compression ratio, equivalence ratio, and injection timing. The characteristics of the resulting combustion and exhaust emissions are discussed in terms of the rate of heat release computed from the measured pressure, and the concentrations of THC, CO, and NOx are measured by FT-IR and CLD. The experimental data to date show that operation without knock is possible with mixtures of higher equivalence ratio when DME is directly injected rather than when it is inducted in the form of a perfectly homogeneous fuel-air mixture. Although fuel injected early in the compression stroke promotes homogeneity of the DME-air mixture in the cylinder, it causes the mixture to ignite too early to secure good thermal efficiency and knock-free operation at high loads. Low temperature reactions occur at about 660K regardless of the fueling methods, fuel injection timing and equivalence ratio. The main components of hydrocarbon emissions turned out to be unburned fuel (DME), formaldehyde and methane.     

宝森林

他总是快得像一道光线,掠过她三叉戟的天窗,投下片刻光阴的恍惚,然后离开,干干净净。     

Application of Chinese Characters in the Design and Construction of the Badaling Great Wall Station of the Beijing-Zhangjiakou High-Speed Railway北大核心CSCD

The new Badaling tunnel is the longest tunnel on the under-construction Beijing-Zhangjiakou highspeedrailway, with the Badaling Great Wall station to be built in the tunnel. This station, which is under the Badaling Great Wall historic site, is the world’s largest underground high-speed railway station with the most complicated structure and the largest overburden and excavation area. It is therefore a representative project for China’s highspeed railway development strategy, supporting infrastructure facilities for the Beijing Horticultural Expo 2019 and the 2022 Winter Olympics in Beijing, and it is important that it be of high quality and completed safely. In the de-sign and construction of the station, the glyphs of the Chinese characters of "中",”国”,”人”and”品”are used, re-spectively, along the station route, in the rescue and evacuation mode, auxiliary adit and partial excavation, which is a way to successfully integrate the art of Chinese characters into tunnel engineering. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Hybrid modeling of seat-cab coupled system for truck

For the complex structure and vibration characteristics of the seat and cab system of truck, there is no reliable theoretical model for the suspensions design at present, which seriously restricts the improvement of ride comfort. In this paper, a 4 degree-of-freedom seat-cab coupled system model was presented; using the mechanism modeling method, its vibration equations were built; then, by the tested cab suspensions excitations and seat acceleration response, its parameters identification mathematical model was established. Combining the tested signals and a simulation model with the parameters identification mathematical model, a new method of hybrid modeling of seat-cab coupled system was presented. With a practical example of seat and cab system, the parameters values were identified and validated by simulation and test. The results show that the model and method proposed are correct and reliable, and lay a good foundation for the optimal design of seat suspension and cab suspensions to improve ride comfort.     

Dynamic system‐optimal traffic assignment for a city using the continuum modeling approach

This paper presents a continuum dynamic traffic assignment model for a city in which the total cost of the traffic system is minimized: the travelers in the system are organized to choose the route to their destinations that minimizes the total cost of the system. Combined with the objective function, which defines the total cost and constraints such as certain physical and boundary conditions, a continuum model can be formulated as an optimization scheme with a feasible region in the function space. To obtain an admissible locally optimal solution to this problem, we first reformulate the optimization in discrete form and then introduce a heuristic method to solve it. This method converges rapidly with attractive computational cost. Numerical examples are used to demonstrate the effectiveness of the method. Copyright © 2013 John Wiley & Sons, Ltd.     

Influence of Light Distribution and Installation Style of Luminaires on Power Consumption and Lighting Effect of Tunnel Lighting北大核心CSCD

Light distribution (LD) and installation style of luminaires affect the utilization factor (UF) of luminaires, and the UF affects the luminaire power and road pavement illuminance and further the power consumption of illu- minating system and the luminous effect of road pavement. An UF model of tunnel lighting was established based on the luminaire LD data and installation parameters, in which four LD styles were adopted. For each LD the parame- ters optimization and simulation were conducted regarding four installation styles, e.g. central style, offset-of-vault style, symmetric style and staggered style. The energy-saving and the lighting effects of each LD and luminaire in- stallation style at the tunnel middle zone were studied. The results show that symmetric luminaire installation is the most energy-saving style and has the best lighting effect than the other three luminaire installation styles; the lighting effect of central luminaire installation is the second best; staggered luminaire installation is the most energy-intensive style and has the worst lighting effect except for some special-shaped LD; waterdrop-shaped LD is the most suitable one along transverse direction of tunnel and applicable to the central, offset-of-vault and symmetric luminaire instal- lation styles; symmetric butterfly-shaped LD is the most suitable one along longitudinal direction of tunnel and appli- cable to the central, offset-of-vault, staggered and symmetric luminaire installation styles; with waterdrop-shaped LD along transverse direction and symmetric butterfly-shaped LD along longitudinal direction, they are suitable for the above four luminaire installation styles, and have better energy-saving and lighting effect; as for the LD with symmetric and oblique curve, it’s better for the profile of oblique luminaire distribution to be comply with that along tunnel transverse direction, and it is suitable for the symmetric and offset-of-vault luminaire installation styles. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

基于遗传算法的盾构隧道管片接头刚度反演研究北大核心CSCD

梁-弹簧模型在管片衬砌结构计算中应用较广泛,目前接头刚度取值方法主要有模型试验法及经验取值法,模型试验法耗时长、成本高昂,而依据经验取值难免存在一定主观性。鉴于此,利用C++编程语言,基于遗传算法开发了盾构隧道管片结构位移反分析程序,首先通过弹性模量值反演算例,得出反演值与理论值误差为1.4%,验证了算法和程序的可行性。利用程序将反演接头刚度值与实际设计案例管片接头刚度值进行对比,反演计算结果表明:正弯矩下管片环向接头转动刚度值反演误差为2.6%,负弯矩下管片环向接头转动刚度值反演误差为4.3%。     

Developing Metro Systems in the People’s Republic of China: Policy and Gaps

Rapid urbanization has taken place in China since the Open Policy in 1978. In face of the growing demand for mobility in large cities, new metro systems were developed in large cities like Guangzhou and Shanghai. At present, there are seven cities with 10 metro lines under construction. What are the policy issues and major challenges of developing metro systems in China? This paper systematically reviews the current situation and highlights three major gaps that Chinese cities have to overcome in planning metro systems. They are the technology gap, the financing gap and the affordability gap. A discussion of these gaps in the Chinese context leads us to the conclusion that early planning and careful studies are important in the development of metro systems in China. Moreover, the existing official criteria (population and economic power) for approving the building of metro systems are insufficient and should be supplemented by more vigorous evaluation criteria.     

A qualitative analysis of reintroducing cabotage onto New Zealand's coasts

This paper provides a qualitative analysis of the proposal to ‘reintroduce cabotage’ onto New Zealand's coasts. New Zealand's coastal shipping trade was opened up to international competition in 1995. The analysis is principally based on a stakeholder analysis of the 83 submissions received by the Shipping Industry Review team, as part of the Government's study to identify ways to increase participation in New Zealand's shipping industry. The stakeholders included New Zealand and international shipping companies, unions, industry associations, freight service providers, manufacturers and producers. The main conclusion drawn from the stakeholder analysis was that to reintroduce cabotage onto New Zealand's coasts would appear to have an overall net negative impact on the New Zealand economy at this stage. However, the Shipping Industry Review team ‘was divided on the implementation of cabotage’, and a force-field analysis was undertaken subsequently based on the author's stakeholder impact analysis and the Review team's list of pros and cons of reintroducing cabotage. This force-field analysis also supported the author's earlier conclusion. However, the almost ‘complete absence of statistics’ relating to the commercial activities of the shipping industry in New Zealand places severe limits on the analysis.