Trigger algorithm of vehicle automatic crash notification system

The Automatic Crash Notification (ACN) system is an effective technology to decrease the crash response time, improve the level of post-accident rescue and alleviate the severity of injuries. To realize this system, a vehicle terminal is developed. And based on a moving window integral algorithm, the trigger algorithm of ACN system is designed. By comparing the effect of different window widths on the trigger algorithm, we select the window width of the moving window integral algorithm as 8 ms. After system is triggered, different notify types was determined according to the change of velocity in the moving window. A sled impact simulation test shows that the impact can be identified rapidly and also the notify types can be judged by the trigger algorithm. A vehicle road test proves that the ACN system has no false trigger cases. The outcomes of this study support identifications of accidents and crash severities for both occupants and emergency centers.     

Experimental study of EGR cooler regeneration aided by oxygen-fed NTP and air-fed NTP

Based on non-thermal plasma (NTP) technology fed by oxygen and air as the gas source respectively, the experimental system of exhaust gas recirculation (EGR) cooler regeneration was built to do a study at different regeneration temperatures. By measuring the concentration of main active substance and CO_x in regeneration process, the influence of temperature on regeneration aided by oxygen-fed NTP and air-fed NTP was investigated. The experimental results indicate that EGR cooler can be regenerated both by air-fed NTP and oxygen-fed NTP at a wide temperature range of 18 °C ～ 300 °C. By comparison of the regeneration with oxygen-fed NTP and air-fed NTP, it can be easily known that the regeneration effect is most remarkable at 150 °C with oxygen-fed NTP and at 120 °C with air-fed NTP. In addition, when the temperature is below 150 °C especially at 120 °C, the regeneration efficiency of air-fed NTP is lower than oxygen-fed NTP, nevertheless, when the temperature is above 150 °C, air-fed NTP has a superiority in regeneration and the higher the temperature is, the more obvious the superiority will be.     

Degree of fault isolability and active fault diagnosis for redundantly actuated vehicle system

This paper proposes á degree of fault isolability concept and active fault diagnosis method for redundantly actuated vehicle systems. Fault isolability is a structural property related to system dynamics and composition of actuators and sensors. Existing research on testing fault isolability has involved checking whether the system is isolable, i.e., binary in nature. A continuous value rather than a binary metric is needed to evaluate how isolable a given system fault is based on a specific measurement set. After fault components are isolated, the fault type and magnitude are estimated by analyzing residual vectors. In a redundantly actuated system, the number of controls/actuators is greater than the system mobility. Thus, the control input distribution to achieve a given control objective is not unique. In the case of a fault, the active fault diagnosis system adjusts the control input distribution to diagnose the fault. Thus, much more system information can be identified by additional excitation through a redundantly actuated system, which improves the fault diagnosis performance. Simulation results of a four-wheel independently driven and steered vehicle model validated the proposed degree of fault isolability and the effectiveness of the proposed active fault diagnosis method.     

Multi-axle vehicle dynamics stability control algorithm with all independent drive wheel

The stability driving characteristic and the tire wear of 8-axle vehicle with 16-independent driving wheels are discussed in this paper. The lateral stability of 8-axle vehicle can be improved by the direct yaw moment which is generated by the 16 independent driving wheels. The hierarchical controller is designed to determine the required yaw torque and driving force of each wheel. The upper level controller uses feed-forward and feed-backward control theory to obtain the required yaw torque. The fuzzification weight ratio of two control objective is built in the upper level controller to regulate the vehicle yaw and lateral motions. The rule-based yaw moment distribution strategy and the driving force adjustment based on the safety of vehicle are proposed in the lower level controller. The influence of rear steering angle is considered in the distribution of driving force of the wheel. Simulation results of a vehicle double lane change show the stability of 8-axle vehicle under the proposed control algorithm. The wear rate of tire is calculated by the interaction force between the tire and ground. The wear of tire is different from each other for the vehicle with the stability controller or not.     

隧道三维激光扫描测算一体化技术方案与实践北大核心CSCD

三维激光扫描技术已在隧道工程中得到广泛应用,但其内外业脱节、人工操作过多、实时性不足等问题日益凸显。文章结合工程实践,提出三维激光隧道扫描测算一体化技术方案,通过隧道设计模型录入、坐标里程解算、点云自动过滤、点云降采样与地物分离等,对点云进行特征值提取,得到兼顾规模、精度、效率的点云数据模型;通过点云与设计、点云与点云的对比解算,得到隧道工程质量安全相关成果。该技术方案在某铁路隧道工程中进行实践,可将内外业工作总时间缩短至20 min以内,自动化程度高,成果精度好,具有很好的推广价值。     

Influence of seabed sand wave on hydrodynamic performance of submersible北大核心CSCD

[目的]研究潜器在海底沙波地形干扰下的水动力特性。[方法]基于计算流体力学(CFD)方法,使用STAR-CCM+软件并结合重叠网格方法对潜器经过海底沙波的过程进行模拟,计算潜器阻力系数和升力系数在此过程中的变化。[结果]结果表明,当潜器近海底航行时,沙波地形会对潜器产生一定的干扰,当艏部运动至波峰附近时,负升力出现最大值,当艉部运动至波峰附近时,阻力出现最大值;在不同航速下,潜器表面压力分布规律的不同会导致升力系数的变化规律不同;随着近海底距离的减小,海底沙波对潜器阻力和升力变化影响显著,当H/D>5时,海底沙波对潜器阻力和升力的影响可以忽略。[结论]所做研究可为潜器的安全及操纵性能提供一定的参考。     

Overview of intelligent ship route optimization methods北大核心CSCD

智能船舶航线优化在学术界和工业界均受到越来越多的关注。针对智能船舶航线优化问题,从航线设计方法和航线优化算法这2个层面,分别阐述各种设计方法和优化算法的特点。结合近5年来的最新研究成果,在分析国内外智能船舶航线优化技术发展现状的基础上,将航线设计方法归纳为3种,即基于气象数据的航线优化、基于油耗模型的航线优化以及基于航线库或航路点库的航线优化,剖析其技术内涵及应用情况;深入分析改进的等时线法、动态规划法、图形搜索算法、智能算法、人工智能和机器学习算法的特性及不足,总结归纳将各类算法应用于智能船舶航线优化时存在的主要问题。最后,简要展望智能船舶航线优化的发展趋势,为未来在该领域的研究提供一定的思路。     

Le transport ferroviaire régional de voyageurs : un processus collectif d’apprentissage

Regional passenger rail services are prevalent in France, as opposed to the more marginal role they play elsewhere in the world. It is indeed at the regional level that reforms have been successfully implemented, probably because the process was gradual and cautious. Initially in 1997, seven regions began experimenting with a decentralized system of regional passenger transportation services. By 2002, all metropolitan regions, with the exception of Corsica and Ile-de-France, were involved. Today we have reached a point where this process can be retrospectively and prospectively assessed. This article is first a retrospective assessment of the role of actors and the emerging dynamic between regional passenger rail transport supply and demand. Then, a prospective evaluation is offered since regionalization is best understood as an ongoing learning process that can be discontinuous or continuous.     

The role of paratransit: some reflections based on the experience of residents’ coach services in Hong Kong

Paratransit refers to urban transport services “somewhere between private passenger transport and conventional public transport in terms of cost and quality of service” [Rimmer (1980), Paratransit: A commentary. Environ. Plan. A 12, 937–944]. Since the 1980s, a new form of paratransit—residents’ coach, which provides exclusive transport services to residents living in private housing estates—has emerged in Hong Kong. What was the background underlying the emergence and subsequent growth of residents’ coach services? Also, what was the role of residents’ coach in the public transport system of Hong Kong? With the completion of more railway extensions, should residents’ coach services be replaced? If so, what are the potential impacts on people’s life? This paper addresses the above research questions through a large-scale questionnaire survey that examined not only people’s modal choice but also their residential choice, socio-economic background and attitudes. The findings suggest that transport policy makers should pay more attention to examine new forms of paratransit and the ways of integrating them into the overall public transport system, both spatially and temporally. It is only through the development of an efficient and multi-modal transport system can the maximum potential of paratransit in filling the transport gap between conventional mass transit and private cars be realized.     

Vibration transmission reduction from a centrifugal turbo blower in a fuel cell electric vehicle

This paper presents a multi-body flexible dynamic analysis of a centrifugal turbo blower for a fuel cell electric vehicle (FCEV) based on the application of computer-aided engineering (CAE) to predict the acceleration at the mount position of the blower. This predicted acceleration is validated by using the measured acceleration data. The numerical simulation for the multi-body flexible dynamics of the blower is used not only to identify the most effective mount among four mounts in an FCEV by controlling the complex stiffness of the isolator, but also to suggest the range of complex stiffness of the isolator at the most effective mount. This numerical simulation technology can be useful for the estimation of the variation of vibration transmission for the structural modification of the turbo blower.