Reliability assessment of maintained ship hulls with correlated corroded elements

This paper reviews the factors that affect the corrosion rate of the ship hull girder. It is shown that corrosion rates vary as a function of the location of the element in the structure, of the ocean area and type of ballast tank and steel. However, the corrosion rate in elements that are subjected to similar conditions is highly correlated.

A time-variant formulation is proposed including the correlation between the corrosion rates in neighbouring elements in modelling the degrading effect that corrosion has on the reliability of ship hulls. The effect of corrosion is represented as a time-dependent decrease of plate thickness that affects the midship section modulus. One repair policy was considered and the example results show the effect of plate replacement when its thickness reaches 75% of the original value. The results also illustrate how the limit value of the thickness in the repair criteria influences the reliability and the decision about repair actions. This is also shown for the effect of different corrosion rates, inspection intervals, and allowable stresses.     

On the axial force induced on a duct by a propulsor

The axial force induced on a duct (duct thrust) which surrounds a propulsor is, by means of an energy conservation argument, expressed in terms of the thrust and power of the propulsor and the kinetic energy losses per unit of time of the propulsor and the duct. Emphasis is put on the linear theory of an axisymmetric ducted actuator disk, where it is shown that the work done by the duct thrust is equal to the extra work done by the actuator disk when it is surrounded by the duct. This simplified model gives more insight into the interaction between the propeller and the duct and on the limits of linearization.     

Wave impact on a horizontal elastic plate

The objective is to find slamming-induced local stresses in the steel or aluminum wetdeck of a multihull vessel. This is studied theoretically by representing the wetdeck as a beam model and accounting for dynamic hydroelastic effects. Two numerical methods are used, one being a simplified asymptotic solution. Satisfactory agreement between the two methods is reported. Experimental drop tests of horizontal elastic plates of steel and aluminum are also reported, and the results from the experiments agree well with the numerical computations. This study reveals, both numerically and experimentally, that slamming-induced local stresses are strongly influenced by dynamic hydroelastic effects. The maximum bending stresses are insensitive to where waves hit, the curvature of the waves, and maximum pressures. Measured maximum pressures are very sensitive to external conditions, and cannot be used as a measure of maximum local bending stresses. A simple procedure for local design stresses due to wetdeck slamming is outlined.     

Pb and Pu in the Northeast Water Polynya, Greenland: particle dynamics and sediment mixing rates

Distributions of the radionuclides ²¹⁰Pb and ^239,240Pu in sediment cores from the Northeast Water Polynya, Greenland, showed that these nuclides reached depths of 5–15 cm by particle mixing and sediment accumulation. End-member average values of the particle mixing coefficient and sediment accumulation rate were 0.13 cm² y⁻¹ and 0.06 cm y⁻¹, obtained from the ²¹⁰Pb profiles by assuming that each process is dominant relative to the other. Both ²¹⁰Pb and ^239,240Pu were measured on four cores; using the Pu data to constrain mixing rates produced corrected sediment accumulation rates that were 20–80% of the values calculated by neglecting mixing. Organic carbon burial in the polynya sediments was ≤0.4 mmol m⁻² d⁻¹, based on measured POC values at depth in the sediments and sediment accumulation rates corrected for mixing. This value is about 1% of the independently measured POC flux leaving the euphotic zone and compares with benthic carbon remineralization rates of 7% calculated by others from O₂ uptake in the sediments.The inventories of excess ²¹⁰Pb in the sediments ranged from 6 to 28 dpm cm⁻². Relative to the atmospheric input of ²¹⁰Pb and in situ production from decay of ²²⁶Ra, approximately 5 dpm cm⁻² of ²¹⁰Pb was being removed from the water column. The difference between the removal from the water column and sediment inventories suggests a net import of ²¹⁰Pb to the polynya. This may occur by input of dissolved ²¹⁰Pb from offshore waters or by input of ²¹⁰Pb carried by sea ice. Particulate matter in land-derived fast ice adjacent to the polynya contained 330 ± 14 dpm of excess ²¹⁰Pb g⁻¹. If particles transported in sea ice are comparable to those extracted from fast ice, then sea ice transport into the polynya followed by melting may be an important source of excess ²¹⁰Pb to the area. Fast ice also may contribute ²¹⁰Pb if portions break off and melt within the polynya, as occurred in 1993.     

Acceleration noise and level of service of urban roads - A case study

Capacity measurement of roads under mixed traffic conditions as prevailing in India is ambiguous as it varies with time, composition of traffic and roadway encroachments. High incidence of slow moving vehicles and tricycles adds to the problem. Volume - capacity ratio appears to be an inadequate measure of defining level of service under mixed traffic situations. An attempt is made in this paper to explore the possibility of presenting unconventional parameters like standard deviation of speed, co-efficient of variation of speed and acceleration noise as possible measures of level of service. Tentative ranges of acceleration noise are proposed in association with flow and speed to explain level of service of urban roads catering to mixed traffic. The results are based on a study conducted in Madras, a major metropolitan city of India.     

Effect of capacity concentration on highway corridor performance

This paper investigates, through use of analytical models, the effects of capacity concentration on highway corridor performance. It concludes that when highways operate at a fixed total capacity, decreasing the highway spacing can increase the average travel time because highways will become more congested. When highways operate below capacity, decreasing the spacing is usually beneficial as it tends to reduce trip length when accessing highways, and allows a greater percentage of travel to be completed on highways instead of arterials.     

Subsidy and public transit performance: A factor analytic approach

The need to measure and evaluate transit system performance has led to the development of numerous performance indicators. However, depending upon the indicator, we oftentimes reach different conclusions regarding transit system performance. The research reported in this paper uses factor analytic methods to generate a set of underlying attributes (factors) that capture the performance of public transit systems in Indiana. Similar to what is reported in the literature, this study finds three attributes that best describe transit system performance: efficiency, effectiveness, and overall performance. Based upon systemsÕ factor scores, the study finds that systems scoring highly on one attribute generally perform well on the remaining attributes. Further, there is an inverse relationship between system performance and subsidies, a finding that supports performance based subsidy allocations.     

大秦线运煤敞车车体情况调查及分析

针对我国铁路运煤敞车现状,以大秦线在用各种类型运煤敞车为试点,开展运煤敞车车体情况调查及分析,重点调查分析了铝合金、耐候钢和铁素体不锈钢材料车体的腐蚀、磨损情况,保护涂料现状,异种材料焊接部位的裂纹、腐蚀情况,材料的疲劳寿命和表面涂装问题,得出分析结论:目前使用的耐候钢材料其耐腐蚀性能不能满足车辆设计寿命的要求,铁素体不锈钢在耐腐蚀性能上明显优于耐候钢。建议对TCS不锈钢材料进行运用条件下的大气暴晒试验,C70B车体外表面油漆使用新的长效防护涂装体系,对有裂纹的车辆进行解剖、研究,以确定裂纹产生的原因、扩展方式和速度。     

澳大利亚绩效审计的经验及借鉴

20世纪70年代以来,绩效审计已经成为大部分国家政府审计的主流,在发达国家绩效审计已经占到审计工作总量的2/3。而我国由于起步较晚,国家审计工作目前仍以传统的财务审计为主,绩效审计处于试验和探索阶段。本文介绍了澳大利亚绩效审计的主要经验,结合我国国情,对我国绩效审计工作实践提出几点意见和建议。     

板式轨道弹性垫层CA砂浆的研究

研究了板式轨道弹性垫层CA砂浆的基本配合比,分析了CA砂浆的流动度、含气量等性能影响因素,开发出适合板式轨道施工的CA砂浆垫层,对其性能进行了对比测试。结果表明,此种CA砂浆垫层具有早期强度高、不泌水、不分层,抗冻融性及耐候性能优异等特点,完全能用于板式轨道的施工。