铁路货车防盗系统设计

针对铁路运输的货物在途中被盗现象，提出了货车、集装箱防盗系统的设计原理，给出了系统硬件结构示意图和软件设计框图并对其在 Ｔ Ｍ Ｉ Ｓ中的使用前景进行了展望。     

Surface chlorophyll in the Black Sea over 1978–1986 derived from satellite and in situ data

Absolute values of chlorophyll a concentration and its spatial and seasonal variations in the Black Sea were assessed by using satellite CZCS and in situ data. Since the satellite CZCS had operated for the 1978–1986 period, CZCS data was used for assessing the past state of the Black Sea just before the onset of drastic changes observed in late 1980s. The approach used for the calculation of the absolute values of chlorophyll a concentration from CZCS data was based on the direct comparison of in situ chlorophyll a data and those of CZCS and by applying the algorithm developed for the transformation of CZCS data into chlorophyll a values. CZCS Level 2 data related with pigment concentration having a spatial resolution of 1 km at nadir were used. The daily Level 3 files were derived by binning Level 2 values into 4-km grid cells and the monthly and seasonal Level 3 files were created by averaging the daily Level 3 files over the corresponding period. In situ chlorophyll a data were obtained by spectrophotometric and fluorometric methods in 15 scientific cruises over the 1978–1986 period. Total number of ship-measured data used for the comparison with those CZCS values was 590.Chlorophyll a concentration (Chl) was derived from CZCS values (C) with regression equations Chl=kC; the coefficient of transformation k was calculated from six different data sets by taking into account distinctions between subregions and seasons. The reasons for difference in the k values have been analyzed.Statistical comparison of the chlorophyll a values measured in situ and those derived from CZCS data was based on log-transformed data and gave the following results: regression SLOPE=0.842, regression INTERCEPT=−0.081, coefficient of determination (R²)=0.806, root–mean–square ERROR=0.195. The mean monthly chlorophyll a distributions derived from CZCS data over 1978–1986 have been constructed and the mean seasonal chlorophyll a values in different regions have been calculated and analyzed. The significant difference in chlorophyll concentration between the western shelf regions and the open part of the Black Sea has been demonstrated, especially in warm season. At almost all seasons, the highest chlorophyll concentration is observed in the western interior shelf region which is under strong influence of Danube. The summer mean chlorophyll concentration in this region is 18 times higher than that in the open parts and about nine times higher than in the eastern shelf region. The greatest seasonal variations are observed in the open part of the Black Sea: chlorophyll concentration in cold season is four to six times higher than in summer and three to five times higher than in April and October. To the contrary, in the western interior shelf regions, the concentration is higher in May–October (about twice than that in November–March). Seasonal variations in the western outer shelf regions are smoothed out as compared with both the western interior shelf and the open regions.     

Study on lateral dynamic characteristics of vehicle/turnout system

Based on Chinese No. 12 high speed, single-way swing nose rail concrete sleeper turnout, a comprehensive vehicle/turnout system coupling dynamic model has been established in this paper, and the lateral and vertical dynamic characteristics of vehicle/turnout systems have been simulated while the car passes through the turnout zone on divergence. These dynamic characteristics show that the lateral impact and vibration of the systems caused by the wheel/rail contact and irregularity are very intensive, especially at the switch zone and nose area of the turnout, and the lateral dynamics of the turnout system, such as lateral stability, vibrating responses, impacting and the allowable passing velocity force between the wheelsets and the switch rails are much more complicated than that of the vertical ones.     

Novel Manufacturing Technology of Hyperbolic Plates for Shipbuilding

On the basis of the principle of dieless hydrobulging technology, a novel hydrobulging technology for manufacturinghyperbolic plates is proposed. First, a toroidal pipe elbow or a partial toroidal pipe elbow is formed, then the single hydrobulgedstructure can be cut up into some desired plates. It is proved by experiments and finite element simulation that manufacturingtechnology of hyperbolic plates adopting integrated hydrobulging forming technology is feasible.     

Public transport demand estimation by calibrating a trip distribution-mode choice (TDMC) model from passenger counts: A case study in Bandung,Indonesia

A problem always found in developing countries is the lack of information required for short, medium and long term planning purposes due to money and time constraints. This becomes even more valuable for problems which require ‘quick-response’ treatment. A flexible model approach allows monitoring a long term plan in order to check its short term performance at regular intervals using easily-available data. If found necessary, changes to the plan may be evaluated and eventually implemented. For this reason, the approach is deemed appropriate for long term planning and project evaluation even in the case of rapid changes in land-use, socio-economic and population parameters usually occurs in most of developing countries. A key element of the approach is a system to update the forecasting model (in particular its trip distribution and mode choice elements) using low-cost and/or easily-available information. Traffic counts are particularly attractive to be used in developing countries for planning purposes. The estimation of public transport demand, particularly important for planning purposes, is an expensive and time consuming undertaking. The need for a low-cost method to estimate the public transport demand is therefore obvious. The objective of this paper is the development of methods and techniques for modelling the public transport demand using traffic (passenger) count information and other simple zonal-planning data. We will report on a family of aggregate model combined with a family of mode choice logit models which can be calibrated from traffic (passenger) counts and other low-cost data. The model examined was the Gravity (GR) model combined with the Multi-Nominal-Logit (MNL) model. Non-Linear-Least-Squares (NLLS) estimation method was used to calibrate the parameter of the combined model. The combined TDMC model and the calibration method have been implemented into a micro-computer package capable of dealing with the study area consisting of up to 300 zones, 3000 links and 6000 nodes. The approach has been tested using the 1988 Public Transport Data Survey in Bandung (Indonesia). The model was found to provide a reasonably good fit and the calibrated parameter can then be used for forecasting purposes. General conclusion regarding the advantageous and the applicability of the approach to other environments are given.     

Knock in dual-fuel diesel combustion with an E85 ethanol/gasoline blend by multi-dimensional simulation

In this paper, knocking combustion in dual-fuel diesel engine is modeled and investigated using the CFD code coupled with detailed chemical kinetics. The ethanol/gasoline blend E85 is used as the primary fuel in a dual-fuel combustion concept based on a light-duty diesel engine equipped with a common-rail injection system. The E85 blend is injected and well mixed with intake air in the intake manifold and is ignited by the direct injection diesel fuel. A 46-species, 187-reaction Multicomponent mechanism is adopted to model the auto-ignition process of the E85/air/diesel mixture ahead of the flame front. Based on the model validation, knocking combustion under boost and full load operating condition for 0 %, 20 %, 50 %, as well as 70 % E85 substitute energy is simulated. The effects of E85 substitute rate and two stage injection strategies on knock intensity, power output, as well as location of the auto-ignition initiation is clearly reproduced by the model. The calculation result shows that, for a high E85 rate of 50 % and 70 % with single injection strategies, the most serious knock and the origin of auto-ignition always occurs far away from where the flame of diesel spray is first generated, at the center of combustion chamber, due to higher pressure wave, relatively richer E85 mixture and longer distances of flame propagation. The two stage injection strategies with a small amount of diesel pilot injection ahead of the main injection primarily influence the ignition behavior of the directly injected fuel, leads to a lower pressure rise rate and a reduced propagation distance, both of which contribute to the attenuation of knock intensity for a higher E85 rate.     

Non-natural equilibrium contour design for radial tire and its influence on tire performance

Two types of radial tire 11.00R20 and 385/65R22.5 are chosen as the research objects, and their carcass contours are redesigned by using Sakai Hideo’s, Frank’s and the new non-natural equilibrium contour design theories, which were based on analyzing the current non-equilibrium contour design theories of radial tire. Then the tire wear, rolling resistance and grip performance of the two radial tires designed by different non-natural equilibrium contour design theories are comprehensively analyzed with the finite element software ABAQUS. The results show that Frank’s contour design theory can reduce tire wear; the new non-natural equilibrium contour design theory can enhance tire wear, rolling resistance performance, etc. It is also found that the tire carcass contour has great influence on tire performance, especially on the tire rolling resistance. The new non-natural equilibrium contour theory provides a guidance to reduce the tire rolling resistance, and it can break through the target conflicts in tire performance. The tire with the new non-natural equilibrium carcass contour can enhance its comprehensive performance.     

Dynamic system‐optimal traffic assignment for a city using the continuum modeling approach

This paper presents a continuum dynamic traffic assignment model for a city in which the total cost of the traffic system is minimized: the travelers in the system are organized to choose the route to their destinations that minimizes the total cost of the system. Combined with the objective function, which defines the total cost and constraints such as certain physical and boundary conditions, a continuum model can be formulated as an optimization scheme with a feasible region in the function space. To obtain an admissible locally optimal solution to this problem, we first reformulate the optimization in discrete form and then introduce a heuristic method to solve it. This method converges rapidly with attractive computational cost. Numerical examples are used to demonstrate the effectiveness of the method. Copyright © 2013 John Wiley & Sons, Ltd.     

Optimize combustion of compressed natural gas engine by improving in-cylinder flows

In order to solve the problem of slow flame propagation in a spark-ignition engine fueled with compressed natural gas (CNG), the influence of in-cylinder flows on combustion process was investigated in CA6SE3-21E4N CNG-engine by means of numerical simulation and experiment. The status of in-cylinder flows from intake to expansion stroke was described by computational fluid dynamic tool, which revealed that the in-cylinder flows were one of the main reasons of slow burning rate. Therefore, a special-shaped combustion chamber called Cross was used to improve the in-cylinder flows. The results showed that peak turbulent kinetic energy of Cross was 43.9% higher than that of original combustion chamber called Cylinder during the late compression period at 1450 rpm 100% load. The combustion parameters, brake specific fuel consumption (BSFC) and regulated emissions were obtained by means of experiment. At 1450rpm 25%, 50%, 75% and 100% load conditions, the ignition delay of Cross was longer than that of Cylinder, moreover, the Cross produced averagely 5.75°CA shorter combustion duration. The BSFC of Cross was on an average of 4.3% reduction at 1450 rpm as well as the HC and CO emissions were reduced whereas the NOx emissions were significantly increased.