A Study of Prevention Techniques for Tunnel Lining Defects北大核心CSCD

Defects of tunnel lining, such as inadequate thickness, voids, cracks, rock falling and water leakage etc., endanger the safety of railway tunnel operation. Based on the site construction, an analysis of the reasons for lining defects was conducted; technical measures against lining defects were proposed and tests were carried out at site. The results show that these measures are reliable and effective, and the purposes of prevention and treatment are re⁃ alized. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

永磁同步电机直接转矩控制的建模与仿真研究

为了研究永磁同步电机直接转矩控制系统的动态性能,利用Matlab/Simulink建立了永磁同步电机直接转矩控制模型,并对电机的启动性能以及负载为阶跃输入情况进行了仿真分析,仿真结果表明所构建的系统模型动态过程符合实际调速系统运动过程。     

船舶电网谐波分析

本文介绍了电力推进船舶谐波,阐明了谐波产生的原因和谐波的危害,分析总结了抑制船舶谐波的方法和措施。     

7.5 kW三电平APFC的研制

介绍了7.5 k W三电平APFC的研制过程。对三电平APFC进行了建模分析,论述了主要工作原理,对空间矢量控制算法进行了仿真验证。采用电压外环和电流内环双闭环控制,给出了实验过程中PI参数的调节步骤。实验结果验证了理论分析的正确性。     

海洋核动力平台不间断逆变电源一种高可靠性工作模式

本文介绍了一种不间断逆变电源高可靠性工作模式,具体而言是海洋核动力平台不间断逆变电源以受控电流源模式在线并网输出,一方面作为交流电网的热备用,另一方面实现有源电力滤波与无功补偿功能。一旦检测到交流电网掉电,逆变电源立刻从电流源模式切换到电压源模式输出,保障负荷的不间断供电。     

Large-scale evacuation network optimization: a bi-level control method with uncertain arterial demand

To improve the efficiency of large-scale evacuations, a network aggregation method and a bi-level optimization control method are proposed in this paper. The network aggregation method indicates the uncertain evacuation demand on the arterial sub-network and balances accuracy and efficiency by refining local road sub-networks. The bi-level optimization control method is developed to reconfigure the aggregated network from both supply and demand sides with contraflow and conflict elimination. The main purpose of this control method is to make the arterial sub-network to be served without congestion and interruption. Then, a corresponding bi-objective network flow model is presented in a static manner for an oversaturated network, and a Genetic Algorithm-based solution method is used to solve the evacuation problem. The numerical results from optimizing a city-scale evacuation network for a super typhoon justify the validity and usefulness of the network aggregation and optimization control methods.     

沉管隧道预制管节顶推滑移系统摩擦试验研究

为了针对某大型沉管隧道预制管节的顶推滑移系统选择合适的摩擦面材料,文章对该顶推滑移系统的四组拟采用摩擦面材料(不锈钢板-PTFE、不锈钢板-NGE、普通钢板-PTFE、普通钢板-NGE)进行了静、动态摩擦系数测试。利用20 000 k N压剪试验机、采用双剪法进行了模拟测试试验。试验结果表明:(1)四组被测试摩擦面的摩擦系数中,不锈钢板与PTFE板的最小,普通钢板与PTFE板的最大;(2)锂基润滑油和水对减小不锈钢板与PTFE板之间的静、动摩擦系数效果都十分明显,但锂基润滑油对摩擦系数的减小效果会随着油层被挤压变薄而逐渐减弱。该试验结果为该顶推滑移系统的摩擦面材料选择以及摩擦面润滑处理措施提供了重要参考依据。     

浅谈箱梁顶板的横向计算分析

箱梁顶板的横向计算是箱梁横截面设计的重要组成部分。本文通过对某一斜腹板箱梁的横向计算,为桥梁工程设计提供一个参考。     

大断面浅埋偏压隧道CRD法施工工序研究

文章以良村隧道CRD法施工为工程背景,布设了变形监测点及内力测试元件,分析了CRD法施工隧道围岩变形情况及结构内力特征,并对CRD法施工隧道在不同开挖顺序下的开挖过程进行了数值模拟,分析比较了不同开挖顺序时的围岩位移、应力变化情况。结果表明:CRD法对各分部施工工序影响较大,且各分部对拱顶下沉的影响程度从大至小依次为1部、2部、3部和4部;隧道内侧围岩压力大于外侧,钢支撑内力均为压应力,且拱腰位置轴力大于其它部位。比较隧道开挖变形的差异以及结构的受力特点,结合数值分析结果,得出了山体外侧先开挖方案无论在围岩变形还是隧道结构受力方面相比于山体外侧后开挖都较小,安全系数相对较高。因此,合理的施工工序应该是先进行山体外侧开挖并施作初期支护,然后再在山体内侧开挖施工。     

船用柴油机12PA6B超负荷性能试验研究

我国船用柴油机功率标准规定柴油机应能够在超负荷功率(即110%标定功率)下连续运转。超负荷工况各参数变化可以反映柴油机的整体性能,是船用柴油机负荷试验的重要工况点。本文通过陕柴重工生产的12PA6B柴油机的负荷试验,研究证实该机型在超负荷工况下能保持较低的燃油消耗率和烟度排放,以及较高的功率和扭矩输出。