薄层环氧沥青混合料抗剪级配优化研究

依托桃夭门大桥钢桥面铺装大修工程实例， 对如何提高薄层环氧沥青混合料抗剪切性能进行了分析研究， 提出 EA-10_S-I中断级配设计方法， 并通过室内混合料抗剪性能试验、 路用性能检测和试验段铺装检测， 优化抗剪级配设计曲线。 研究结果表明优化 EA-10_S-I级配相对于传统 Fuller 密级配沥青混合料有更好的抗剪性能， 而疲劳耐久性则优于 FAC-10_优 级配。     

浅谈新海凤轮电站的原理与维护

本文主要介绍分析新海凤轮自动化电站的配电板单线原理图、配电模式划分与转换、电站主要功能。通过对电站在日常发生的多种故障现象进行简要判断分析,总结出日常对电站管理与维护的经验,以达到维持电站的稳定性、提升电站管理与维护水平目的。     

Two degree of freedom flow-induced vibration of cylindrical structures in marine environments: frequency ratio effects

The flow-induced vibration of a cylindrical structure is a very common problem in marine environments such as undersea pipelines, offshore risers, and cables. In this study, the vortex-induced vibration (VIV) of an elastically mounted cylinder at a low Reynolds number is simulated by a transient coupled fluid–structure interaction numerical model. Considering VIV with low damping ratio, the response, hydrodynamic forces, and vortex shedding modes of the cylinder is systematically analyzed and summed up the universal rule under different frequency ratios. On the basis of the analysis, we find that the frequency ratio α is a very important parameter. It decides the locked-in, beat, and phase-switch phenomena of the cylinder, meanwhile, it also influence the vortex mode of the cylinder. The trajectory of the two degrees of freedom (2 DOF) case at different natural frequency ratios is discussed, with most trajectories having a “figure of 8” shape and a few having a “crescent” shape. A fast Fourier transformation technique is used to obtain the frequency characteristics of the vibration of the cylindrical structure. Using the 2 DOF cylinder model in place of the 1 DOF model presents several advantages in simulating the nonlinear characteristics of cylindrical structures, including the capacity to model the crosswise vibration generated by in-line vibration.     

Elasto-plastic modeling of soft soil considering degradation of stiffness

The stiffness has a large influence on the behavior of soils. Its value is affected by some of the soils properties, such as the over consolidated ratio(OCR), the effective normal stress, and the plasticity index etc. In this paper, the numerical modeling of soft soils was carried out using an improved elasto-plastic S-clay1 model accounting for degradation of stiffness. The relation between the stiffness and the shear strain was established based on a large number of experimental data. The effects of strain-dependent stiffness of normally consolidated soils and over consolidated soils on the stress-strain behavior were studied through a comparison of the simulations with the experimental results of undrained triaxial compression tests. The results show that the behaviors of soils can be well predicted with the improved constitutive model, particularly before the peak stress.     

Review of managing the risks of offshore banking and its implications for the China (Shanghai) Pilot Free Trade Zone

As more and more Chinese and foreign-funded banks settle in the China (Shanghai) Pilot Free Trade Zone (CSPFTZ), it has become an imperative to enhance risk management of offshore banking. At the international level, the regulatory effort for offshore banking mainly focuses on tax evasion and money laundering. Existing regulatory frameworks have established standards to identify countries providing facilities for money laundering and developed punitive measures. In terms of strategy, it is suggested that, firstly, relevant regulatory measures should be improved in the short term, and it is necessary to define the scope of offshore banking and regulatory measures for Chinese banks and foreign-funded banks under a suitable legal framework. Secondly, it is necessary to establish risk exposure mechanism and risk evaluation system for the offshore banking in the CSPFTZ, while risk management measures are implemented based on on-site supervision. Thirdly, in the medium and long term, it is necessary to enhance management of potential risks which can be created by offshore banking due to deregulation. Fourthly, on the one hand, specific regulations should be formulated to provide a regulatory basis for taxation; on the other hand, tax informational exchange agreements (TIEAs) may be used as a reference for achieving effective tax regulation.     

海洋核动力平台电力系统设计概要

中国正在进行的海洋核动力平台国家示范工程项目,其电力系统设计存在着新的问题。本文以海洋核动力平台的需求为立足点,充分兼顾核电站的设计要求以及船舶入级的要求,归纳了适用于海洋核动力平台电力系统设计的要点,对海洋核动力平台的工程设计和新标准规范的制定具有较强的参考意义。     

基于NFFD 算法的船体几何变形技术

本文以非均匀有理B样条基函数作为参数体属性,并结合非均匀控制点网格,建立了适用于船体几何的NFFD变形技术。重点阐述了NFFD方法的基本原理和变形规则,并以矩阵表示方法为基础构建了数学模型。研究了控制点数量和分布对变形结果的影响,增加了控制点变形几何的能力并获得了更大的设计空间。最后,以某CNG运输船为例完成了球鼻艏、船艏和船艉部分几何的自动变形。本文的工作为船型优化提供了良好的变形工具。     

新海凤推进控制系统原理及维修

将瓦锡兰Lipstronic7000控制系统应用于自航耙吸挖泥船新海凤轮,本文介绍瓦锡兰Lipstronic7000控制系统的基本原理,依据原理和实船应用,浅谈几种可能遇到的问题及维修方法、预见性维护。     

锂离子电池热失控抑制与防连锁

锂离子电池是当今社会非常重视的一种能源,但是也有一定的安全隐患。抑制热失控与防连锁成为安全性的重要课题。本文介绍了锂离子电池组热失控以及连锁反应的机理,采用一定的措施抑制热失控、防止连锁反应。提出了较为浅显的可行方案。     

散粮输送工艺设备分析

通过对散粮输送行业中常见的工艺设备进行探究,分析设备运行过程中可能存在的问题,提出合理的解决方案,为散粮系统工艺设计及工程运行提供重要参考意义。