Punching Shear Behavior of RC Slab-Column Connections with Nonrectangular Columns

This paper present an experimental study on the RC slab-colunm connections with nonrectangular colunms, namely cross-shaped column, T-shaped column and L-shaped column. The punching shear deformation and strength characteristics of slab-column connections with nonrectangular columns under punching shear load are investigated. Nine specimens with the three kinds of nonrectangular columns and two reference specimens with square columns are tested. The tested ultimate loads, deformations, and failur emodes of specimens are presented and discussed. Test results reveal that the punching shear strength and ductility of the connections with nonrectangular columns are higher than those of the corresponding connections with square columns, and also prove that the application of nonrectangular columns to flat-plate structure was feasible. Based on the test results, one method of calculating punching shear strength of connections with nonrectangular columns is proposed, which conforms with the current design practice of China. The test results on the punching shear strength are compared with the predictions of the formulas proposed by codes of several different countrie; and the predictions given by ACI code and China code are found to be conservative as the reinforcement ratio is increased.     

A bintree energy approach for colour image segmentation using adaptive channel selection

A new hierarchical approach called bintree energy segmentation was presented for color image segmentation. The image features are extracted by adaptive clustering on multi-channel data at each level and used as the criteria to dynamically select the best chromatic channel, where the segmentation is carried out. In this approach, an extended direct energy computation method based on the Chan-Vese model was proposed to segment the selected channel, and the segmentation outputs are then fused with other channels into new images, from which a new channel with better features is selected for the second round segmentation. This procedure is repeated until the preset condition is met. Finally, a binary segmentation tree is formed, in which each leaf represents a class of objects with a distinctive color. To facilitate the data organization, image background is employed in segmentation and channels fusion. The bintree energy segmentation exploits color information involved in all channels data and tries to optimize the global segmentation result by choosing the ＂best＂ channel for segmentation at each level. The experiments show that the method is effective in speed, accuracy and flexibility.     

车辆与工程机械电子液压控制的发展

简要综述了车辆与工程机械中电子液压控制的新进展和需要解决的关键技术问题。提出了实现功率传输和运动控制与综合的新方案，给出了发动机-液压传动装置-负荷最佳匹配的实现方法。以应用于上海磁悬浮高速铁路工程轨道梁运输与搬运的工程机械的计算机控制系统为背景，讨论了基于现场总线控制系统(FCS)和PCI04车载工控机的车辆计算机控制系统的设计方法。     

微型电动轿车车身骨架结构分析

利用ANSYS软件对某进口微型电动轿车车身骨架进行了强度、刚度和模态计算：分析了电动轿车车身骨架的结构特点和电瓶盒等钣金件的影响，提出了独立悬架边界条件的模拟方法。     

半金属摩擦材料与灰铸铁滑动摩擦的磨屑成分分析

采用X射线衍射仪和能谱分析系统，对3种金属纤维增强半金属摩擦材料与灰铸铁在不同温度时发生滑动摩擦后的磨屑成分进行了分析，并结合扫描电子显微镜(SEM)观察到的摩擦材料表面形貌，分析了材料的磨损特性和机理。分析结果表明，含钢纤维材料Fe原子浓度达50％～60％，Cu、Ba、Ca、Al等元素的原子浓度在6％～10％；含黄铜纤维与紫铜纤维的材料副磨屑中，二者Fe原子浓度均较高，但其它元素的原子浓度为紫铜低于黄铜；紫铜材料体系的结合程度比黄铜好，填料不易脱落，但对对偶损伤稍大。     

铰接式自卸车国内外发展及悬挂系统的探讨

以铰接式自卸车与悬挂系统为背景，分析了铰接式自卸车的国内外发展与悬挂系统的现状、特性与优化设计方案。     

基于RMA方法的汽车车身CAN总线优化设计

针对汽车车身控制信息的高实时性和车身CAN系统扩充的高灵活性等特殊要求,介绍用于实时系统分析的速率单调分析(RMA)方法,在原总线利用率、信息最坏响应时间等实时性指标基础上引入总线扩展灵活性因子进行车身CAN总线方案的寻优设计,并以典型汽车车身控制系统为例,对单信号方案和信号组合方案进行实时性和扩展灵活性对比分析,在线试验结果验证了理论分析数据的正确性。     

综合交通信息平台 建设运营机制研究

在分析国内外已建交通信息系统和信息平台建设、运营和服务情况的基础上,研究了信息的平台性质与功能定位、建设运营模式和保障机制。提出了3种适合我国现状的信息平台建设运营模式:政府行为型;政府建设、企业运营型;政府引导、企业运作型。研究了各类模式的特点和适用性。     

电传动技术在矿用自卸车上的应用

电传动技术具有无级变速,传动部件受冲击小,动力制动行驶安全的特点,因此在国内外获得了广泛应用。介绍了电传动技术用于矿用自卸车中的必要性,并以DE170矿用自卸车为例进行了说明。     

混合动力重型商用汽车驱动系统设计

首先介绍了混合动力汽车的基本概念及核心驱动系的构造。通过对比分析国外Volvo-FE混合动力商用汽车结构,对我公司某款车型进行了并联式混合动力驱动系统结构方案设计、驱动策略设计及主要动力总成部件参数的确定。