里海远洋渔船无人机舱系统研究

针对我国远洋渔船装备落后、操纵性差、机舱环境恶劣、电站管理水平低、劳动强度大以及渔船机舱自动化水平低等问题,介绍里海远洋渔船无人机舱系统的设计与组成。通过采用主机遥控系统、电站功率管理系统、机舱监测报警系统以及网络通信等技术,将自动化、电气化、信息化和智能化控制技术等船舶前沿科技应用于实船,构建一个满足法国船级社(BV)机舱自动化最高等级AUT-UMS要求的无人机舱系统,以提高远洋渔船的操控性、安全性和可靠性,提升供电系统自动化管理水平,改善作业人员工作环境。对该自动化系统的效果和特点进行分析,结果可为我国远洋渔船自动化系统的研究提供策略和思路。     

考虑螺旋桨体积力的水下机器人水动力特性仿真

为在初步设计时预测ROV的水动力性能,使用CFD技术进行分析,以ROV模型为例,最大程度地保留ROV内部的构件,使模型更加接近真实状况。分别计算ROV在不同工况下的阻力、不同漂角下的横向力和转艏力矩以及添加体积力模型之后的螺旋桨流场状况,很好地模拟出ROV周围的流场,并与已有的试验数据进行对比。结果验证了CFD水动力仿真的可行性和准确性,并还可预测ROV在螺旋桨作用下的进速等,对ROV设计具有实际的参考价值和指导意义。     

B-60型干舷散货船甲板货装载设计

随着航运市场的持续低迷,BDI指数持续走低,全球散货船市场深受运力过剩和货运需求不足影响,越来越多的船东希望在散货船增加甲板货装载,以拓展散货船的利润空间,提高船舶经济效益。在散货船甲板装货,必将对船舶甲板载荷、稳性性能、视线等产生影响,需要在原有船舶设计的基础上,增加对甲板载荷、稳性计算等方面的考核。以某B-60型干舷散货船为例,详细阐述散货船装载甲板货的设计分析。     

Back-Calculation of Ground Stress Field and Rockburst Analysis for Wunvfeng Tunnel北大核心CSCD

Studying the in-situ stress distribution at a tunnel site is very important to determine surrounding rock characteristics, the engineering design and the construction scheme. By using the multiple linear regression method based on the least square algorithm, the initial geostress field is analyzed and the corresponding regression coefficients are obtained. The ground stress obtained from the proposed back analysis is reasonable and can meet the demands of the engineering applications. From the rockburst risk level distribution diagram, it is speculated that the Wunvfeng tunnel is in the high filed stress area. Field monitoring should be strengthened and emergency plans should be made to cope with the rockburst risks during the construction process. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Soil Body Deformation Caused by Construction of a Double-Line Shield Tunnel with Multiple Factors北大核心CSCD

Considering the influence of many factors (soil loss, frontal additional thrust, the friction force of the shield shell and the additional grouting force), a method for improving the uniform soil body movement model is pro-posed, and a mechanical calculation model is established to study the calculation method for soil body deformation caused by double-line parallel shield driving. Based on the Mindlin solutions of elastic mechanics, the theoretical solutions for soil body deformations caused by the last three factors are calculated; considering the uniform soil body movement model, the theoretical solutions for soil body deformations caused by soil loss are calculated, then the to-tal theoretical solutions for soil body deformations under multiple factors are obtained by means of superposition. The vertical surface settlement, vertical horizontal displacement, and vertical displacements of the soil body at different depths of Hangzhou Metro Line 1 are calculated to analyze the variation laws. Meanwhile the influential factors for horizontal displacement variation are studied. The research shows that with a change of depth, the settlement of the soil body changes within the scope of 10 to 13 m in the horizontal direction near where the maximum settlement occurs;the direction of the horizontal displacement of the soil body changes with a change of the positional relationship be-tween the calculation points and the tunnel; and with an increase of interval J for the two tunnels, the horizontal dis-placement of the soil body of a deep double-line tunnel decreases while the displacement near the surface changes slightly. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

A Study of Prevention Techniques for Tunnel Lining Defects北大核心CSCD

Defects of tunnel lining, such as inadequate thickness, voids, cracks, rock falling and water leakage etc., endanger the safety of railway tunnel operation. Based on the site construction, an analysis of the reasons for lining defects was conducted; technical measures against lining defects were proposed and tests were carried out at site. The results show that these measures are reliable and effective, and the purposes of prevention and treatment are re⁃ alized. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

基于碳纤维电热法的公路桥梁融冰研究

为了研究公路桥面融冰问题,通过分析桥面融冰热力学原理,建立桥面电热法融冰的传热有限元分析模型,得到了桥面温度场分布。通过现场埋设碳纤维发热线和温度传感器,对实桥进行桥面温升试验,分析了实桥温升规律。在冰雪气候环境条件下,进行实桥融冰雪试验。研究结果表明,碳纤维线缆电热法进行桥面融冰,桥面局部最高温度不超过45℃,桥面温度变化均匀连续,通电3.5小时,桥面上面层最低温度大于零度,通电4.2小时后,桥面结构温度场分布趋于稳定,上面层温度达到2.5℃。     

永磁同步电机直接转矩控制的建模与仿真研究

为了研究永磁同步电机直接转矩控制系统的动态性能,利用Matlab/Simulink建立了永磁同步电机直接转矩控制模型,并对电机的启动性能以及负载为阶跃输入情况进行了仿真分析,仿真结果表明所构建的系统模型动态过程符合实际调速系统运动过程。     

船舶电网谐波分析

本文介绍了电力推进船舶谐波,阐明了谐波产生的原因和谐波的危害,分析总结了抑制船舶谐波的方法和措施。