静态爆破工艺在旧桥改造中的应用

阐述了静态爆破施工的作用机理和施工工艺,通过与常规爆破工艺相比较,论证了该工艺具有的造价低、无振动、无噪声、无粉尘、无飞石、无毒气污染等特点和其广泛的推广应用价值.     

特种弹药铁路运输可调式定位装置研究

概述了特种弹药铁路运输可调试定位装置的主要功能、技术要求、主要战技术指标，介绍了特种弹药铁路运输采用的从箱体顶部固定方式，并进行了相应的可调式定位装置研究，将装置分为整体固定和单点独立固定两种，用于固定弹箱在敞车内的位置，确保弹体运输安全。     

关于沥青混凝土路面的常见病害及防治措施

沥青混凝土路面主要应用于公路的面层,由于沥青混凝土材料本身的差异,以及受设计、施工水平的影响,沥青路面常常出现松散、脱皮、冻胀翻浆、水破坏、沉陷、开裂、泛油、坑槽等病害。这些病害的出现严重影响了路面行车速度、行车安全、加大了汽车磨损、缩短了沥青路面的使用寿命,使行车不畅,行成交通压力,造成道路使用年限缩短。本文具体结合工程项目阐述沥青混凝土的施工工艺、病害分析及防治措施。     

Effect of interference fits on the fatigue lives of bolted composite joints

The effect of interference fits on the fatigue lives of bolted composite joints is investigated by conducting mechanical tests. Static and fatigue tests are carried out on specimens made of carbon-bismaleimide composites joined together as double-lap single-bolt joints. The bolts having interference fits ranging of 0 (neat fit), 0.5%, 0.75% and 1% are performed. The results demonstrate the relationship between fatigue life and different values of interference fits. After the fatigue tests, non-destructive evaluation (NDE) and scanning electron microscope (SEM) are used to observe the damage of the surrender and surface of the hole. The test results show that the interference fitted specimens have improved fatigue life compared to the neat fitted specimen. The NDE and SEM results reveal that the damage degree of interference fitted specimen is weaker than that for the neat fitted one.     

反激变换器电流连续和断续的比较研究

根据单端反激变换器的电路和工作波形,推导了其在输出电流连续和不连续情况的工作原理,并且给出了在MATLAB/Simulink中的正激变换器的仿真模型和仿真结果。通过对仿真结果的分析得出以下结论:其优点是电路所用元器件少,电路简洁。其缺点如下:输出功率较小,稳定性较差,以及开关应力大,电路能量损耗较大。     

新型光纤光栅测量法在系杆拱桥索力监测中的应用

为保证系杆拱桥的安全和正常工作,必须加强桥梁索力监测.由于光纤光栅的优越性,现已成为工程健康监测领域的研究热点,但现有方法尚未成熟,因此研究一种新型光纤光栅索力监测技术,即光纤光栅基座夹具测量法,并将此方法应用在新建的龙苴大桥索力实时监测中.监测结果表明:光纤光栅基座夹具测量法及实施方案的可行性和准确性,检测数据可靠.此方法既可监测实际张拉过程中索力,也可在张拉结束后进行索力持续监测,为系杆拱桥的安全监测起到重要的补充及改进作用.     

Two degree of freedom flow-induced vibration of cylindrical structures in marine environments: frequency ratio effects

The flow-induced vibration of a cylindrical structure is a very common problem in marine environments such as undersea pipelines, offshore risers, and cables. In this study, the vortex-induced vibration (VIV) of an elastically mounted cylinder at a low Reynolds number is simulated by a transient coupled fluid–structure interaction numerical model. Considering VIV with low damping ratio, the response, hydrodynamic forces, and vortex shedding modes of the cylinder is systematically analyzed and summed up the universal rule under different frequency ratios. On the basis of the analysis, we find that the frequency ratio α is a very important parameter. It decides the locked-in, beat, and phase-switch phenomena of the cylinder, meanwhile, it also influence the vortex mode of the cylinder. The trajectory of the two degrees of freedom (2 DOF) case at different natural frequency ratios is discussed, with most trajectories having a “figure of 8” shape and a few having a “crescent” shape. A fast Fourier transformation technique is used to obtain the frequency characteristics of the vibration of the cylindrical structure. Using the 2 DOF cylinder model in place of the 1 DOF model presents several advantages in simulating the nonlinear characteristics of cylindrical structures, including the capacity to model the crosswise vibration generated by in-line vibration.     

Assessing the representativeness of a smartphone-based household travel survey in Dar es Salaam,Tanzania

The household travel survey (HTS) finds itself in the midst of rapid technological change. Traditional methods are increasingly being sidelined by digital devices and computational power—for tracking movements, automatically detecting modes and activities, facilitating data collection, etc.. Smartphones have recently emerged as the latest technological enhancement. FMS is a smartphone-based prompted-recall HTS platform, consisting of an app for sensor data collection, a backend for data processing and inference, and a user interface for verification of inferences (e.g., modes, activities, times, etc.). FMS, has been deployed in several cities of the global north, including Singapore. This paper assesses the first use of FMS in a city of the global south, Dar es Salaam. FMS in Dar was implemented over a 1-month period, among 581 adults chosen from 300 randomly selected households. Individuals were provided phones with data plans and the FMS app preloaded. Verification of the collected data occurred every 3 days, via a phone interview. The experiment reveals various social and technical challenges. Models of individual likelihood to participate suggest little bias. Several socioeconomic and demographic characteristics apparently do influence, however, the number of days fully verified per individual. Similar apparent biases emerge when predicting the likelihood of a given day being verified. Some risk of non-random, non-response is, thus, evident.     

城市轨道交通车辆门系统传动部件动力学仿真研究

基于多体动力学软件RecurDyn的仿真分析功能,对城市轨道交通门系统传动部件进行了研究.首先搭建了门系统动力学模型,模拟手动关门过程对模型参数进行验证;然后对开关门过程进行仿真,得到门系统运动各阶段丝杆所受扭矩;最后建立螺母副有限元模型,对开关门过程中主要传动零部件的强度进行校核.