舰船噪声源近场聚焦波束形成定位方法

阐述了船噪声源近场聚焦波束形成定位方法,给出舰船辐射噪声的近场范围,并使用MVDR方法针对单频信号进行了仿真计算。计算结果表明,对于线谱声源情况,在声源频率较高的情况下,该方法定位效果较好;在声源频率较低的情况下,该方法定位效果很差。     

半潜船概率破舱稳性浅析

应用国际通用的概率破舱稳性理论对半潜船的分舱情况和破舱稳性进行初步分析.通过大量计算研究舱室垂向水平分隔限制、初始装载状态和边舱几何形状对分舱指数A的关系及影响,得到相关要素间的关系曲线图表和船舶设计指导原则.结合一艘半潜船破舱稳件概率方法的计算实例.针对概率衡准(SOLAS)做出计算结果的理论解释.最后给出半潜船的设计要素,对船舶设计初期指导压载水舱划分和评价概率破舱稳性具有参考价值.     

基于加权最小二乘法的武器装备批量生产成本费用研究

加权最小二乘法考虑了现实情况下普遍存在的异方差性,在经济预测中有着更为广泛的应用。在系统研究我国武器装备批量生产规律和状况的基础上,结合计量经济的相关理论,提出基于加权最小二乘法的费用预测模型,并辅以实例进行分析,结果表明,该方法移植性好,由于消除了异方差性的影响,模型的拟合和预测性能较一般最小二乘法更佳。     

内覆防水吸声层的海水消声器声学性能计算

对内部进行了防水吸声处理的海水消声器进行了声学计算,提出了分析此类问题的数值仿真方法：首先运用分层媒质理论对含空腔防水吸声层的声学性能进行计算,利用ANSYS建立海水消声器的三维有限元模型,导入SYSNOISE软件中并将防水吸声层的吸声系数及表面声阻抗作为边界阻抗计算消声器内部声场的声压分布以及传递损失。对某内覆防水吸声层的海水消声器的声学特性进行了数值计算和分析,研究结果对提高含防水吸声结构海水消声器的降噪效果具有重要意义。     

初始缺陷对耐压圆柱壳结构极限承载力的影响

为了考察初始缺陷、材料等因素对耐压圆柱壳结构极限承载力的影响,本文利用ANSYS有限元软件构造模型对耐压圆柱壳结构进行模拟．研究了缺陷幅值在一定范围内变化时,初始缺陷对耐压圆柱壳极限承载力的影响,并将有限元计算结果与理论计算结果进行比较,讨论了材料的改变对极限承载力的影响．初始缺陷幅值不会改变耐压圆柱壳结构的失稳模态,且对结构极限承载力的影响有限,但材料的改进对提高结构极限承载力的效果显著．     

钙钛矿型La（0.3）Ca（0.7）FeO3的制备及其电化学性能

采用甘氨酸-硝酸盐燃烧法制备了钙钛矿型复合氧化物La0.3Ca0.7FeO3,并用X-射线衍射分析,扫描电镜,X-射线能谱仪对纳米晶体的晶型、晶粒大小、形貌及组成进行表征.用乙炔黑为载体制备功能氧电极,采用三电极体系,测试循环伏安曲线.结果表明：800℃焙烧2 h得到完整的晶体,晶体粒子大小均匀,粒径为17.9 nm,为菱形晶系;同时该氧电极具有明显的电催化特性.     

基于GIS的港口防台应急辅助决策与指挥系统研究

台风防御是我国东南沿海各港口＂三防＂工作的重中之重。分析了目前我国港口防台工作的不足之处,提出了利用地理信息技术解决目前存在的问题,设计并开发了港口防台应急辅助决策与指挥系统。在软件整体架构设计、功能模块设计、数据设计等方面进行了研究,并介绍了＂厦门港防台应急指挥系统＂的应用情况。     

玻璃钢模板在南京港龙潭港区四期水工码头Ⅱ标段中的应用

为提高施工效率和降低成本,在南京港龙湾港在四期水工码头Ⅱ标段引桥圆形立桩施工中,采用新型的平板玻璃钢模板,替代传统的钢模板或木模板施工方法。对玻璃钢板的制作和施工工艺进行详细的介绍。采用玻璃钢模板施工法浇注的圆柱,其光洁度完全达到清水混凝土的效果,并且工艺简单,节约成本,有重要现实意义。     

沿海半潜观光船破舱稳性的计算

本文就客船破舱稳性计算中浮体等相关问题作了简要介绍。     

Air pollution history elucidated from anthropogenic spherules and their magnetic signatures in marine sediments offshore of Southwestern Taiwan

Kaohsiung City and its neighborhood in the southwestern coastal plain of Taiwan have suffered serious air pollution since the region became the largest center for heavy-industry on the island. In order to unravel the air pollution history of the region, four ²¹⁰Pb- and ¹³⁷Cs-dated sediment box cores recovered in 2006 from offshore of this area were chosen for magnetic and petrographic analyses. The data were used to distinguish changes in concentration, composition and grain size of magnetic particles in the sediments due to inputs of anthropogenic magnetic spherules. Sedimentation rates have been reasonably constant for the last one hundred years, except at the core tops which were affected by a turbidite layer induced by a typhoon in 2005. Down-core profiles of mass-specific magnetic susceptibility (χ) and saturation isothermal remanent magnetization (SIRM) are similar among the cores, and reflect similar trends to magnetic spherule counts. This reveals that χ and SIRM of modern marine sediments can be used as air pollution indicators for nearby industrialized upwind areas. The studied record indicates that industrialization of the area was gradual during 1950–1980 and boomed afterward, resulting in a high production of airborne magnetic spherules, which is consistent with evidence for poor air quality at that time. Optical and scanning electron microscopic (SEM) surveys of magnetic extracts indicate that the magnetic spherules have grain sizes ranging from a few micrometers up to 50 μm and consist mainly of iron oxides with variable Si, Al, and Ca contents. X-ray diffraction analysis on magnetic extracts from different depths in the cores further indicates that magnetite and pyrrhotite, which are derived from terrigenous detritus, form the magnetic constituents of the sediments before the area was industrialized. In contrast, during the industrial boom, anthropogenic magnetite and hematite spherules became the dominant magnetic particles in the sediments. Down-core profiles of hard isothermal remanent magnetization (HIRM) below the turbidite layer also reveal similar trends to the corresponding magnetic spherule counts, which indicate that the concentration of hematite in the sediments is also closely related to the extent of air pollution. In addition, relatively low values of χ_ARM/χ, which are indicative of coarse magnetic grains, started to occur when large magnetite spherules became significant during the industrialized period. The air pollution history elucidated from our sediment core data not only reflects the development of Kaohsiung from a small village to a highly industrialized metropolitan area in the 20th century, but it is also consistent with the most recent air pollution trends revealed by real time air quality measurements of PM₁₀. Our results demonstrate the usefulness of magnetic parameters for delineating the air pollution history of coastal marine sediments down-wind of nearby industrialized regions.