Fluxes of dissolved inorganic carbon in three estuarine systems of the Cantabrian Sea (north of Spain)

The diffusive and in situ fluxes of dissolved inorganic carbon (DIC) and total alkalinity (TA) have been measured and an estimation has been made of the water–atmosphere fluxes of CO₂ in three estuarine systems of the Cantabrian Sea during the spring of 1998. Each of these systems undergoes a different anthropogenic influence. The diffusive fluxes of dissolved inorganic carbon and total alkalinity obtained present values ranging between 0.54–2.65 and 0.0–2.4 mmol m⁻² day⁻¹, respectively. These ranges are in agreement with those of other coastal systems. The in situ fluxes are high and extremely variable (35–284 mmol TA m⁻² day⁻¹, 43–554 mmol DIC m⁻² day⁻¹ and 22–261 mmol dissolved oxygen (DO) m⁻² day⁻¹), because the systems studied are very heterogeneous. The values of the ratio of the in situ fluxes of TA and DIC show on average that the rate of dissolution of CaCO₃ is 0.37 times that of organic carbon oxidation. Equally, the interval of variation of the relationship between the benthic fluxes of inorganic carbon and oxygen (F_DIC/F_DO) is very wide (0.3–13.9), which demonstrates the different contributions made by the processes of aerobic and anaerobic degradation of the organic matter, as well as by the dissolution–precipitation of CaCO₃. The water–atmosphere fluxes of CO₂ present a clear dependence on the salinity. The brackish water of these systems (salinity<20), where maximum fluxes of 989 mmol m⁻² day⁻¹ have been estimated, act as a source of CO₂ to the atmosphere. The more saline zones of the estuary (salinity>30) act as a sink of CO₂, with fluxes between −5 and −10 mmol m⁻² day⁻¹.     

A practical approach to identifying the market potential for high speed rail: A case study in the Sydney-Canberra corridor

This paper presents the methodology and selective empirical results from a study of the demand for a high speed rail system serving the Sydney-Canberra corridor currently dominated by air travel for business trips and car travel for non-business trips. We outline the steps involved in the study from problem specification, data needs, development of base year trip tables, model specification and estimation to establish switching behaviour in the presence of a new mode and calculation of induced demand for current travellers. A stated choice heteroskedastic extreme value switching model is used to evaluate the choice of fare type for business and non-business travel given the current mode used in the corridor for each sampled traveller conventional train, charter coach, scheduled coach, plane or car. Starting with the current travel profile, patronage can be predicted under alternative fare regimes, taking into account diverted traffic, induced traffic and growth. Treating fare class as endogenous enhances the real choice context facing potential patrons.     

On the axial force induced on a duct by a propulsor

The axial force induced on a duct (duct thrust) which surrounds a propulsor is, by means of an energy conservation argument, expressed in terms of the thrust and power of the propulsor and the kinetic energy losses per unit of time of the propulsor and the duct. Emphasis is put on the linear theory of an axisymmetric ducted actuator disk, where it is shown that the work done by the duct thrust is equal to the extra work done by the actuator disk when it is surrounded by the duct. This simplified model gives more insight into the interaction between the propeller and the duct and on the limits of linearization.     

Performance indicators for transit management

Transit performance can be evaluated through quantitative indicators. As the provision of efficient and effective transit service are appropriate goals to be encouraged by federal and state governments, these goals are used to develop performance indicators.Three efficiency and four effectiveness indicators are described, together with two overall indicators. These nine indicators are analyzed for comparability utilizing operating and financial data collected from public transit agencies in California.Performance indicators selected for this study should not be viewed as final. Twenty-one performance indicators proposed by previous studies were reviewed. Theoretical considerations and unavailability or unreliability of data caused omission of several useful measures like passenger-miles. Circumstances such as improved data, emphasis upon goals other than efficiency and effectiveness, and local conditions might warrant the inclusion of indicators deleted from this research.This paper is based on work conducted for the Urban Mass Transportation Administration under University Research and Training Grant CA-11-0014, Development of Performance Indicators for Transit. The views expressed herein are those of the authors and not necessarily those of the University of California or the United States Government. We are indebted to John Feren for assistance with the statistical processing and data gathering.     

Regulatory reform and freight mode choice

Reform of trucking Vehicle Weights and Dimensions (VWD) regulations in Canada is now underway. The effect these reforms will have on the freight transportation industry are only recently the subject of research. This paper is part of this new research effort, aimed at understanding how regulatory reform in the trucking sector will affect the existing competitive relationship between trucks and the railways. The paper presents the results of study and research into modelling the relationship between mode choice and the service characteristics that are affected by VWD reform.Using several periods of data, a series of econometric models are developed which help to elucidate the relative relationships between the mode service characteristics for both of the principal interprovincial freight modes. A technique is developed and presented to model railway user costs in order to overcome the complex and often unrepresentable pricing activities of Canadian railways.The strength of the developed econometric models is presented, including their significance and statistical reliability. This is further reinforced by the similarities exhibited by all the models in the series. The selected model is applied to predict market service responses required of the railway industry in order to compete with the trucking sector now adapting to the new regulations.The impact of the newly implemented vehicle weight and dimension reform on the rail transportation industry is analyzed and railway industry improvements aimed at maintaining its market share are presented. The results predicted by the model show that railway user cost reductions should be moderate, and likely less than the level of inflation over the period of time when trucking converts its fleet to take advantage of the new regulations.Abbreviations AASHTO American Association of State Highway and Transportation Officials - CCMTA Canadian Conference of Motor Transport Administrators - EPI End products, inedible commodity classification - GVW Gross Vehicle Weight - NA 1988 VWD National Agreement - RTAC Roads and Transportation Association of Canada - VWD Vehicle Weight(s) and Dimension(s) - WA 1988 VWD Western Agreement     

Process Save Reduction by Macro Joint Approach: The Key to Real Time and Efficient Vehicle Simulation

Applying a non-linear model reduction method to the tire suspension system of road vehicles enables an automatic transfer of complex offline simulation vehicle models to a mathematical model, which fits the real time simulation requirements. The basic assumption, that high frequent inner suspension dynamics are not relevant to handling manoeuvres, converts the differential algebraic equation system (DAE) of suspensions with kinematical closed loops into pure elasto-kinematical linkage equations. The equations of motions can be represented as an ordinary differential equation system (ODE) and considerable simulation time reductions are obtained for the off-line simulation and real time simulation is enabled. This so-called macro joint approach is an alternative modelling method to the well-known look-up table representation of suspension kinematics but it keeps the parameterisation of the original suspension model and is suitable to parameterised real time MBS models. With a second step the dynamics, caused by compliance in the suspension bushings, are reduced to their quasi-static behaviour. The consideration of these quasi-elasticity has nearly no influence on the necessary simulation time. This contribution shows the theoretical background and demonstrates the advantage of the macro joint model reduction approach on a typical vehicle example.     

Spatial Dynamics of Multibody Tracked Vehicles Part II: Contact Forces and Simulation Results

In this part of the paper, three dimensional computational capabilities, that includes significant details, are developed for the nonlinear dynamic analysis of large scale spatial tracked vehicles. Three dimensional nonlinear contact force models that describe the interaction between the track links and the vehicle components such as the rollers, sprockets, and idlers as well as the interaction between the track links and the ground are developed and used to define the generalized contact forces associated with the vehicle generalized coordinates. Tangential friction and contact forces are developed in order to maintain the stability of the track motion and avoid the slippage of the track or its rotation as a rigid body. Body and surface coordinate systems are introduced in order to define the spatial contact conditions. The nonlinear equations of motion of the tracked vehicle are solved using the velocity transformation procedure developed in the first part of this paper. This procedure is used in order to obtain a minimum set of differential equations, and avoid the use of the iterative Newton-Raphson algorithm. A computer simulation of a tracked vehicle that consists of one hundred and six bodies and has one hundred and sixteen degrees of freedom is presented in order to demonstrate the use of the formulations presented in this study.     

Spatial Dynamics of Multibody Tracked Vehicles Part I: Spatial Equations of Motion

In this paper, the nonlinear dynamic equations of motion of the three dimensional multibody tracked vehicle systems are developed, taking into consideration the degrees of freedom of the track chains. To avoid the solution of a system of differential and algebraic equations, the recursive kinematic equations of the vehicle are expressed in terms of the independent joint coordinates. In order to take advantage of sparse matrix algorithms, the independent differential equations of the three dimensional tracked vehicles are obtained using the velocity transformation method. The Newton-Euler equations of the vehicle components are defined and used to obtain a sparse matrix structure for the system dynamic equations which are represented in terms of a set of redundant coordinates and the joint forces. The acceleration solution obtained by solving this system of equations is used to define the independent joint accelerations. The use of the recursive equations eliminates the need of using the iterative Newton-Raphson algorithm currently used in the augmented multibody formulations. The numerical difficulties that result from the use of such augmented formulations in the dynamic simulations of complex tracked vehicles are demonstrated. In this investigation, the tracked vehicle system is assumed to consist of three kinematically decoupled subsystems. The first subsystem consists of the chassis, the rollers, the sprockets, and the idlers, while the second and third subsystems consist of the tracks which are modeled as closed kinematic chains that consist of rigid links connected by revolute joints. The singular configurations of the closed kinematic chains of the tracks are also avoided by using a penalty function approach that defines the constraint forces at selected secondary joints of the tracks. The kinematic relationships of the rollers, idlers, and sprockets are expressed in terms of the coordinates of the chassis and the independent joint degrees of freedom, while the kinematic equations of the track links of a track chain are expressed in terms of the coordinates of a selected base link on the chain as well as the independent joint degrees of freedom. Singularities of the transformations of the base bodies are avoided by using Euler parameters. The nonlinear three dimensional contact forces that describe the interaction between the vehicle components as well as the results of the numerical simulations are presented in the second part of this paper.