合成脂肪酸废水的厌氧处理

对合成脂肪酸废水首先采用氧化钙处理，使其浓度降低到３０００ｍｇ／Ｌ以下，再采用中温厌氧生物处理。在平均水力停留时间为５天时，废水的ＣＯＤＣｒ去除率达７９．１％，沼气产率为０．４１ＮＭ３／ｋｇＣｏＤＣｒ试验还发现，的存在失使厌氧发酵的ｐＨ值上升。     

Reliability-based calibration of fatigue design guidelines for ship structures

A simple reliability-based framework is applied to calibrate a new set of fatigue design guidelines. This new guideline considers two different approaches for the assessment of both loads, stresses and local stress raising effects, and partial safety factors must be given for any combination of these approaches. For the calibration, the lognormal reliability format is adopted because the hereby-derived partial safety factors can be combined arbitrarily. This means that with a few basic partial safety factors, the combination of partial safety factors to be applied together with any combination of calculation approaches can be determined easily. In the present paper both the adopted reliability format, the applied modeling of uncertainties and the selected target safety index are explained. Based on this, a new guideline is calibrated and the derived partial safety factors are presented. Finally, the new guideline is applied through a numerical example in order to show the applicability of the calibrated partial safety factors, and satisfactory results are found.     

Dynamic Simulation of a Smart Crank and Slider Mechanism

In this paper, a smart crank and slider mechanism is analyzed mostly from a dynamic view. By means of dynamic explicit finite element method, 3D nonlinear structure is simulated. It is proved that the mechanism can effectively accomplish smart movement prescribed. And in order to ensure reciprocal movement with higher frequency, measures should be taken to avoid over heating of parts. Compared with internal energy, kinetic energy of total rigid body is dominating, and Y direction equivalent rigid velocity is much higher than X direction velocity. Equivalent rigid velocity of all parts is consistent with respective movement condition. For both energy and velocity, slider effect is dominating. Three direction equivalent inertia force oscillates. Force amplitude in Y -direction is comparitively the greatest.     

捷达轿车故障排除及原因分析

介绍了捷达轿车的一些故障排除方法并对产生故障的原因进行了分析。     

Maritime accident investigation and temporal determinants of maritime accidents: A case study

This paper presents the results of an investigation into temporal determinants of maritime accidents based on a data-set obtained from the proceedings of formal inquiries in the former German Democratic Republic (GDR). The results show that there is no statistically significant outcome between the probability for an accident and the time of watch. Thus the results do not confirm previous studies, which reported significant time of day effects.The outcome of this study indicates that marine inquiries can provide useful data for an analysis of underlying causes of maritime accidents. It is suggested that accident inquiries should be extended into the area of watch systems employed and should record the hours of work and of rest of the officers on the watch involved in a maritime accident.     

Mobile phone use while driving: public opinions on restrictions

This paper reviews two road-user surveys on the use of mobile phones on the road in Finland where the mobile phone ownership rate is highest in the world (70% in August 2000). From 1998 to 1999 the proportion of drivers that chose to use a mobile phone while driving rose from 56% to 68%, while the proportion of phone using drivers who experienced dangerous situations due to phone use rose from 44% to 50%. The proportion of drivers who used their phones in some way to benefit safety on the road remained at about 55%. The youngest, novice drivers had the highest level of phone usage of all age categories. Over 48% of the interviewees believed that the government should ban the use of hand-held mobile phones while driving, and another 27% believed that all types of mobile phone use should be banned while driving. Those drivers who used their phones the most each day were more likely to want some form of restrictions, than those who had lower usage. This is a strong message to the elected lawmakers and raises the problem of exactly how regulatory bodies would go about controlling the future growth of new driver support and non-driving related communication devices in road vehicles. It was concluded that legislating for hands-free use only would be a reasonable course of action. Mandating that the current generation of equipment should be optimized for hands-free use should result in future generations of in-vehicle equipment also being optimized for hands-free use as a minimum criterion.     

浅谈集装箱货物发生残损、短缺的类型与责任归属

集装箱在运输装卸过程中货物时有残损、短缺发生。为了便于现场检验鉴定人员、理货人员、保险理赔人员以及收发货人判明货物的残损、短缺的类型,区分其原因,明确责任归属;同时也便于收发货人或代理人找到责任方,提出索赔、挽回损失,现就集装箱货物的残损、短缺的判别方法、类型、责任归属及其检验鉴定证书的作用作一探讨。     

芜湖长江大桥吊索塔架的设计与施工

芜湖长江大桥无为岸九孔钢梁中有八孔采用吊索塔架辅助全伸臂方法施工。吊索塔架为轴心受压杆件,经吊索传来的力通过塔架中心立柱顶部拉板分配给中心立柱,中心立柱通过其下的支承座支承在钢梁顶的支承垫座上,将力传给钢梁。当塔架作业时,中心立柱将被顶起,塔架的走行结构也将被顶离轨顶。吊索塔架由中心立柱、立柱下支承座、垫座、万能杆件系统、走行结构、吊索和锚箱及下锚箱加长拉板等几部分组成。走行机构有四组,走行轨道设在钢梁上弦杆顶。中心立柱由标准节、顶节、底节、顶部拉板和立柱上支承座五部分组成。     

装配式公路钢桥承载力的有限元分析

指出装配式公路钢桥设计中所采用的简化计算方法的不足,使用大型有限元软件ANSYS对其受力情况和承载力进行了分析,并与简化计算方法作了对比,得出了一些规律性的结论,对实际应用具有指导意义。     

200km/h客货共线单线隧道内接触网设计探讨

通过对遂渝线单线隧道内接触网悬挂的介绍,探讨了以新的设计方式进行速度200 km/h客货共线隧道内接触网平面设计的方法,并通过遂渝线情况的研究,对下一步的设计提出了建议。